Editing Wheelbase (section)

== Rail ==

In rail vehicles, the wheelbase follows a similar concept. However, since the wheels may be of different sizes (for example, on a [[steam locomotive]]), the measurement is taken between the points where the wheels contact the rail, and not between the centers of the wheels.

On vehicles where the [[Wheelset (railroad)|wheelsets (axles)]] are mounted inside the vehicle frame (mostly in steam locomotives), the wheelbase is the distance between the front-most and rear-most wheelsets.

On vehicles where the wheelsets are mounted on [[bogie|bogies (American: trucks)]], three wheelbase measurements can be distinguished:
* the distance between the pivot points of the front-most and rear-most bogie;
* the distance between the front-most and rear-most wheelsets of the vehicle;
* the distance between the front-most and rear-most wheelsets of each bogie.

The wheelbase affects the rail vehicle's capability to negotiate curves. Short-wheelbased vehicles can negotiate sharper curves. On some larger wheelbase locomotives, inner wheels may lack [[flange]]s in order to pass curves.

The wheelbase also affects the load the vehicle poses to the track, track infrastructure and bridges. All other conditions being equal, a shorter wheelbase vehicle represents a more concentrated load to the track than a longer wheelbase vehicle. As railway lines are designed to take a predetermined maximum load per unit of length (tonnes per meter, or pounds per foot), the rail vehicles' wheelbase is designed according to their intended gross weight. The higher the gross weight, the longer the wheelbase must be.