Editing Attenuation (section)

== Electromagnetic ==
Attenuation decreases the intensity of [[electromagnetic radiation]] due to [[absorption (electromagnetic radiation)|absorption]] or [[scattering]] of [[photon]]s. Attenuation does not include the decrease in intensity due to [[inverse-square law]] geometric spreading. Therefore, calculation of the total change in intensity involves both the inverse-square law and an estimation of attenuation over the path.

The primary causes of attenuation in matter are the [[photoelectric effect]], [[Compton scattering]], and, for photon energies of above 1.022 MeV, [[pair production]].

=== Coaxial and general RF cables ===
The attenuation of RF cables is defined by:
: <math>\text{Attenuation (dB/100m)} = 10\times\log_{10}\left(\frac{P_1\ (W)}{P_2\ (W)}\right),</math>
where <math>P_1</math> is the input power into a 100&nbsp;m long cable terminated with the nominal value of its characteristic impedance, and
<math>P_2</math> is the output power at the far end of this cable.<ref>{{cite web |title=Technical Information – Coaxial Transmission Lines |url=http://www2.rfsworld.com/RFS_Edition4/pdfs/TechInfo_Edition4_639-672.pdf |website=rfsworld.com |archive-url=https://web.archive.org/web/20180712160805/http://www2.rfsworld.com/RFS_Edition4/pdfs/TechInfo_Edition4_639-672.pdf |archive-date=2018-07-12 |page=644 |url-status=dead}}</ref>

Attenuation in a coaxial cable is a function of the materials and the construction.

=== Radiography ===
{{Expand section|date=March 2018}}
{{main|Radiography}}
The beam of X-ray is attenuated when photons are absorbed when the x-ray beam passes through the tissue. Interaction with matter varies between high energy photons and low energy photons. Photons travelling at higher energy are more capable of travelling through a tissue specimen as they have less chances of interacting with matter. This is mainly due to the photoelectric effect which states that "the probability of photoelectric absorption is approximately proportional to (Z/E)<sup>3</sup>, where Z is the atomic number of the tissue atom and E is the photon energy.<ref>{{Cite web|url=http://xrayphysics.com/attenuation.html|title=X-Ray Physics: X-Ray Interaction with Matter, X-Ray Contrast, and Dose – XRayPhysics|website=xrayphysics.com|access-date=2018-09-21}}</ref> In context of this, an increase in photon energy (E) will result in a rapid decrease in the interaction with matter.

In [[CT imaging]], attenuation describes the density or darkness of the image.

=== Optics ===
{{Main|Transparent materials}}

Attenuation in fiber optics, also known as transmission loss, is the reduction in intensity of the light beam (or signal) with respect to distance travelled through a transmission medium. Attenuation coefficients in fiber optics usually use units of dB/km through the medium due to the relatively high quality of transparency of modern optical transmission. The medium is typically a fiber of silica glass that confines the incident light beam to the inside. Attenuation is an important factor limiting the transmission of a digital signal across large distances. Thus, much research has gone into both limiting the attenuation and maximizing the amplification of the optical signal.
Empirical research has shown that attenuation in optical fiber is caused primarily by both scattering and absorption.

Attenuation in fiber optics can be quantified using the following equation:

: <math>\text{Attenuation (dB)} = 10\times\log_{10}\left(\frac{\text{Input intensity (W)}}{\text{Output intensity (W)}}\right)</math>

==== Light scattering ====
{{Main|Light scattering}}
[[File:Reflection angles.svg|thumb|upright|Specular reflection]]
[[File:Diffuse reflection.svg|thumb|upright|Diffuse reflection]]
The propagation of light through the core of an optical fiber is based on total internal reflection of the lightwave. Rough and irregular surfaces, even at the molecular level of the glass, can cause light rays to be reflected in many random directions. This type of reflection is referred to as "diffuse reflection", and it is typically characterized by wide variety of reflection angles. Most objects that can be seen with the naked eye are visible due to diffuse reflection. Another term commonly used for this type of reflection is "light scattering". Light scattering from the surfaces of objects is our primary mechanism of physical observation.<ref name="y">{{cite journal
|author=Mandelstam, L.I.
|title=Light Scattering by Inhomogeneous Media
|journal=Zh. Russ. Fiz-Khim. Ova.
|volume=58
|page=381
|year=1926
}}</ref>
Light scattering from many common surfaces can be modelled by reflectance.

Light scattering depends on the wavelength of the light being scattered. Thus, limits to spatial scales of visibility arise, depending on the frequency of the incident lightwave and the physical dimension (or spatial scale) of the scattering center, which is typically in the form of some specific microstructural feature. For example, since visible light has a wavelength scale on the order of one micrometer, scattering centers will have dimensions on a similar spatial scale.

Thus, attenuation results from the incoherent scattering of light at internal surfaces and interfaces. In (poly)crystalline materials such as metals and ceramics, in addition to pores, most of the internal surfaces or interfaces are in the form of grain boundaries that separate tiny regions of crystalline order. It has recently been shown that, when the size of the scattering center (or grain boundary) is reduced below the size of the wavelength of the light being scattered, the scattering no longer occurs to any significant extent. This phenomenon has given rise to the production of transparent ceramic materials.

Likewise, the scattering of light in optical quality glass fiber is caused by molecular-level irregularities (compositional fluctuations) in the glass structure. Indeed, one emerging school of thought is that a glass is simply the limiting case of a polycrystalline solid. Within this framework, "domains" exhibiting various degrees of short-range order become the building-blocks of both metals and alloys, as well as glasses and ceramics. Distributed both between and within these domains are microstructural defects that will provide the most ideal locations for the occurrence of light scattering. This same phenomenon is seen as one of the limiting factors in the transparency of IR missile domes.<ref>Archibald, P.S. and Bennett, H.E., "Scattering from infrared missile domes", Opt. Engr., Vol. 17, p.647 (1978)</ref>

==== UV-Vis-IR absorption ====
In addition to light scattering, attenuation or signal loss can also occur due to selective absorption of specific wavelengths, in a manner similar to that responsible for the appearance of color. Primary material considerations include both electrons and molecules as follows:

* At the electronic level, it depends on whether the electron orbitals are spaced (or "quantized") such that they can absorb a quantum of light (or photon) of a specific wavelength or frequency in the ultraviolet (UV) or visible ranges. This is what gives rise to color.
* At the atomic or molecular level, it depends on the frequencies of atomic or molecular vibrations or chemical bonds, how close-packed its atoms or molecules are, and whether or not the atoms or molecules exhibit long-range order. These factors will determine the capacity of the material transmitting longer wavelengths in the infrared (IR), far IR, radio and microwave ranges.

The selective absorption of infrared (IR) light by a particular material occurs because the selected frequency of the light wave matches the frequency (or an integral multiple of the frequency) at which the particles of that material vibrate. Since different atoms and molecules have different natural frequencies of vibration, they will selectively absorb different frequencies (or portions of the spectrum) of infrared (IR) light.

=== Applications ===
In [[optical fiber]]s, attenuation is the rate at which the signal light decreases in intensity. For this reason, glass fiber (which has a low attenuation) is used for long-distance fiber optic cables; plastic fiber has a higher attenuation and, hence, shorter range. There also exist [[optical attenuator]]s that decrease the signal in a fiber optic cable intentionally.

Attenuation of light is also important in [[physical oceanography]]. This same effect is an important consideration in [[weather radar#Attenuation|weather radar]], as raindrops absorb a part of the emitted beam that is more or less significant, depending on the wavelength used.

Due to the damaging effects of high-energy photons, it is necessary to know how much energy is deposited in tissue during diagnostic treatments involving such radiation. In addition, gamma radiation is used in [[cancer treatments]] where it is important to know how much energy will be deposited in healthy and in tumorous tissue.

In [[computer graphics]] attenuation defines the local or global influence of light sources and force fields.

=== Radio ===
{{Main|Path loss}}
Attenuation is an important consideration in the modern world of [[wireless telecommunications]]. Attenuation limits the range of radio signals and is affected by the materials a signal must travel through (e.g., air, wood, concrete, rain). See the article on [[path loss]] for more information on signal loss in wireless communication.