Editing Euclidean minimum spanning tree (section)

===Total length===
For <math>n</math> points in the [[unit square]] (or any other fixed shape), the total length of the minimum spanning tree edges is <math>O(\sqrt n)</math>. Some sets of points, such as points evenly spaced in a <math>\sqrt n \times \sqrt n</math> grid, attain this bound.{{r|gilpol}} For points in a unit hypercube in <math>d</math>-dimensional space, the corresponding bound is <math>O(n^{(d-1)/d})</math>.{{r|ss89}} The same bound applies to the expected total length of the minimum spanning tree for <math>n</math> points chosen uniformly and independently from a unit square or unit hypercube.{{r|steele}} Returning to the unit square, the sum of squared edge lengths of the minimum spanning tree is <math>O(1)</math>. This bound follows from the observation that the edges have disjoint rhombi, with area proportional to the edge lengths squared. The <math>O(\sqrt n)</math> bound on total length follows by application of the [[Cauchy–Schwarz inequality]].{{r|gilpol}}

Another interpretation of these results is that the average edge length for any set of points in a unit square is <math>O(1/\sqrt n)</math>, at most proportional to the spacing of points in a regular grid; and that for ''random'' points in a unit square the average length is proportional to <math>1/\sqrt n</math>. However, in the random case, with high probability the longest edge has length approximately <math display=block>\sqrt{\frac{\log n}{\pi n}},</math> longer than the average by a non-constant factor. With high probability, the longest edge forms a leaf of the spanning tree, and connects a point far from all the other points to its nearest neighbor. For large numbers of points, the distribution of the longest edge length around its expected value converges to a [[Gumbel distribution]].{{r|penrose}}

Any [[geometric spanner]], a subgraph of a complete geometric graph whose [[Shortest path problem|shortest paths]] approximate the Euclidean distance, must have total edge length at least as large as the minimum spanning tree, and one of the standard quality measures for a geometric spanner is the ratio between its total length and of the minimum spanning tree for the same points. Several methods for constructing spanners, such as the [[greedy geometric spanner]], achieve a constant bound for this ratio.{{r|eppstein}} It has been conjectured that the [[Steiner ratio]], the largest possible ratio between the total length of a minimum spanning tree and Steiner tree for the same set of points in the plane, is <math>2/\sqrt{3}\approx 1.1547</math>, the ratio for three points in an [[equilateral triangle]].{{r|gilpol}}