Open main menu
Home
Random
Recent changes
Special pages
Community portal
Preferences
About Wikipedia
Disclaimers
Incubator escapee wiki
Search
User menu
Talk
Dark mode
Contributions
Create account
Log in
Editing
Freewheel
(section)
Warning:
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
log in
or
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
not
fill this in!
===Vehicle transmissions=== In addition to the automotive uses listed above (i.e. in two-stroke-engine vehicles and early four-stroke Saabs), freewheels were used in some luxury or up-market conventional cars (such as [[Packard]], [[Rover Company|Rover]] and [[Cord Automobile|Cord]]) from the 1930s into the 1960s. Some engines of the period also tended to pass oil past the [[piston ring]]s under conditions with a closed throttle and high engine speed, when the slight vacuum in the combustion chamber combined with high oil pressure and a high degree of [[splash lubrication]] from the fast-turning crankshaft would lead to oil getting in the combustion chamber. The freewheel meant that the engine returned to its idle speed on the overrun, thus greatly reducing noise from both the engine and gearbox and reducing oil consumption. The mechanism could usually be locked to provide [[engine braking]] if needed. A freewheel was also used in the original [[Land Rover Series|Land Rover]] vehicle from 1948 to 1951. The freewheel controlled drive from the gearbox to the front [[axle]], which disengaged on the overrun. This allowed the vehicle to have a permanent [[4 wheel drive]] system by avoiding 'wind-up' forces in the transmission. This system worked, but produced unpredictable handling, especially in slippery conditions or when towing, and was replaced by a conventional selectable 4WD system. During the Second World War, the military Volkswagen vehicles produced by [[Strength Through Joy|KdF]] ([[Volkswagen Kübelwagen|''Kübelwagen'']], [[Volkswagen Schwimmwagen|''Schwimmwagen'']]) were fitted with a [[ZF Friedrichshafen|ZF]] [[limited-slip differential]] system composed of two freewheels, which sent the whole of the engine power to the slower-turning of the two wheels.<ref>{{Citation |place = DE |title = ''ZF-Axial-Selbstsperrdifferential Typ B70 Beschreibung und Wartung'' |publisher = Zahnradfabrik Friedrichshafen AG |date = July 1941}}.</ref> Other car makers fitted a freewheel between engine and gearbox as a form of automatic [[clutch]]. Once the driver released the throttle and the vehicle was on the overrun, the freewheel disengaged and the driver could change gears without using the clutch pedal. This feature appeared mainly on large, luxury cars with heavy clutches and gearboxes without [[synchromesh]], as the freewheel permitted a smoother and quieter change. [[Citroën]] combined a freewheel and a [[centrifugal clutch]] to make the so-called 'TraffiClutch', which let the driver start, stop, and change the lower gears without using the clutch. This was an option on [[Citroën 2CV]]s and its derivatives and, as the name implied, was marketed as a benefit for driving in congested urban areas. Similarly, the [[Saab 93]] was available with an optional [[Saxomat]] clutch. A common use of freewheeling mechanisms is in automatic transmissions. For instance traditional, hydraulic General Motors transmissions such as the [[Turbo-Hydramatic]] 400 provide freewheeling in all gears lower than the selected gear. E.g., if the gear selector on a three-speed transmission is labelled 'drive'(3)-'super'(2)-'low'(1) and the driver has selected 'super', the transmission freewheels if first gear is engaged, but not in second or third gears; if in 'drive' it freewheels in first or second; finally, if in low, it does not freewheel in any gear. This lets the driver select a lower range to provide engine braking at various speeds, for instance when descending a steep hill. [[Overdrive (mechanics)#In Europe|Overdrive units]] manufactured by [[Laycock de Normanville]] used a freewheel to facilitate a smooth gear change between locked mode (1:1) and overdrive mode without use of the conventional [[clutch pedal]]. The freewheel would lock the outgoing axle to the outgoing axle in the brief transition period between the [[conical clutch]] for locked mode disengaging and the clutch for overdrive mode engaging.<ref>{{cite web |title=How it Works: The Laycock Overdrive System |url=http://www.uniquecarsandparts.com.au/how_it_works_laycock_overdrive.php |access-date=2 January 2016}}</ref>
Edit summary
(Briefly describe your changes)
By publishing changes, you agree to the
Terms of Use
, and you irrevocably agree to release your contribution under the
CC BY-SA 4.0 License
and the
GFDL
. You agree that a hyperlink or URL is sufficient attribution under the Creative Commons license.
Cancel
Editing help
(opens in new window)