Editing Multiple buffering (section)

== Triple buffering ==
In [[computer graphics]], '''triple buffering''' is similar to double buffering but can provide improved performance. In double buffering, the program must wait until the finished drawing is copied or swapped before starting the next drawing. This waiting period could be several [[milliseconds]] during which neither buffer can be touched.

In triple buffering, the program has two back buffers and can immediately start drawing in the one that is not involved in such copying. The third buffer, the front buffer, is read by the graphics card to display the image on the monitor. Once the image has been sent to the monitor, the front buffer is flipped with (or copied from) the back buffer holding the most recent complete image. Since one of the back buffers is always complete, the graphics card never has to wait for the software to complete. Consequently, the software and the graphics card are completely independent and can run at their own pace. Finally, the displayed image was started without waiting for synchronization and thus with minimum lag.<ref name=anandtech-triple-buffering>{{cite web|url=http://www.anandtech.com/video/showdoc.aspx?i=3591&p=1|title=Triple Buffering: Why We Love It|publisher=AnandTech|date=June 26, 2009|access-date=2009-07-16}}</ref>

Due to the software [[algorithm]] not [[Polling_(computer_science)|polling]] the graphics hardware for monitor refresh events, the algorithm may continuously draw additional frames as fast as the hardware can render them. For frames that are completed much faster than interval between refreshes, it is possible to replace a back buffers' frames with newer iterations multiple times before copying. This means frames may be written to the back buffer that are never used at all before being overwritten by successive frames. Nvidia has implemented this method under the name "Fast Sync".<ref>{{Cite news|url=http://www.anandtech.com/show/10325/the-nvidia-geforce-gtx-1080-and-1070-founders-edition-review/13|title=The NVIDIA GeForce GTX 1080 & GTX 1070 Founders Editions Review: Kicking Off the FinFET Generation|last=Smith|first=Ryan|access-date=2017-08-01}}</ref>

An alternative method sometimes referred to as triple buffering is a [[swap chain]] three buffers long. After the program has drawn both back buffers, it waits until the first one is placed on the screen, before drawing another back buffer (i.e. it is a 3-long [[FIFO (computing and electronics)|first in, first out]] queue). Most Windows games seem to refer to this method when enabling triple buffering.{{Citation needed|date=August 2019}}