Editing Worst-case execution time (section)

==== Measurement and hybrid techniques ====
Measurement-based and hybrid approaches usually try to measure the execution times of short code segments on the real hardware, which are then combined in a higher level analysis. Tools take into account the structure of the software (e.g. loops, branches), to produce an estimate of the WCET of the larger program. The rationale is that it's hard to test the longest path in complex software, but it is easier to test the longest path in many smaller components of it. A worst case effect needs only to be seen once during testing for the analysis to be able to combine it with other worst case events in its analysis.

Typically, the small sections of software can be measured automatically using techniques such as instrumentation (adding markers to the software) or with hardware support such as debuggers, and CPU hardware tracing modules. These markers result in a trace of execution, which includes both the path taken through the program and the time at which different points were executed. The trace is then analyzed to determine the maximum time that each part of the program has ever taken to execute, what the maximum observed iteration time of each loop is and whether there are any parts of the software that are untested ([[Code coverage]]).

Measurement-based WCET analysis has resulted in good results for both simple and complex hardware, although like static analysis it can suffer excessive pessimism in multi-core situations, where the impact of one core on another is hard to define. A limitation of measurement is that it relies on observing the worst-case effects during testing (although not necessarily at the same time). It can be hard to determine if the worst case effects have necessarily been tested.

There are a number of commercial and academic tools that implement various forms of measurement-based analysis.