Editing Hose clamp (section)

=== Other methods ===
Many other methods can be used to attach hoses or tubing, such as [[compression fitting]]s (where a nylon or soft metal ferrule is compressed onto the hose by the tightening of the fitting), [[push-fit fitting]]s (where the hose is inserted inside of a compression sleeve, designed such that force against the hose causes the sleeve to tighten), [[Swaging|swage fittings]] (where a stiff collar is compressed onto the hose), clamp fittings (where two blocks are tightened onto the sides of the hose, often found on [[garden hose]]s), crimp banding (similar to worm gear banding but a crimp is used instead of a screw/thread), and a multitude of others.  However, these devices are not typically referred to as hose clamps.