Editing Activated sludge (section)

===Package plants===
There are a wide range of types of package plants, often serving small communities or industrial plants that may use hybrid treatment processes often involving the use of aerobic sludge to treat the incoming sewage. In such plants the primary settlement stage of treatment may be omitted. In these plants, a biotic floc is created which provides the required substrate.  Package plants are designed and fabricated by specialty engineering firms in dimensions that allow for their transportation to the job site in public highways, typically width and height of {{convert|12|x|12|ft|m|order=flip}}.  Length varies with capacity with larger plants being fabricated in pieces and welded on site. Steel is preferred over synthetic materials (e.g., plastic) for its durability. Package plants are commonly variants of [[extended aeration]], to promote the "fit and forget" approach required for small communities without dedicated operational staff. There are various standards to assist with their design.<ref>{{Cite web |url=http://www.britishwater.co.uk/Document/Download.aspx?uid=3d63842c-eb86-48b1-be17-12eebf7487a5 |title=Code of Practice, ''Flows and Loads-2'', British Water |access-date=2007-09-08 |archive-url=https://web.archive.org/web/20090326193950/http://www.britishwater.co.uk/Document/Download.aspx?uid=3d63842c-eb86-48b1-be17-12eebf7487a5 |archive-date=2009-03-26 |url-status=dead }}</ref><ref>[http://products.ihs.com/cis/Doc.aspx?AuthCode=&DocNum=252510 Review of UK and international standards] {{webarchive |url=https://web.archive.org/web/20070928105619/http://products.ihs.com/cis/Doc.aspx?AuthCode=&DocNum=252510 |date=September 28, 2007 }}</ref><ref>[http://www.standardsdirect.org/standards/standards4/StandardsCatalogue24_view_5158.html British Standard BS 6297:1983]</ref>

To use less space, treat difficult waste, and intermittent flows, a number of designs of hybrid treatment plants have been produced. Such plants often combine at least two stages of the three main treatment stages into one combined stage. In the UK, where a large number of wastewater treatment plants serve small populations, package plants are a viable alternative to building a large structure for each process stage. In the US, package plants are typically used in rural areas, highway rest stops and trailer parks.<ref name="EPA Package">EPA. Washington, DC (2000). [http://www3.epa.gov/npdes/pubs/package_plant.pdf "Package Plants."] Wastewater Technology Fact Sheet. Document no. EPA 832-F-00-016.</ref>

Package plants may be referred to as ''high charged'' or ''low charged''. This refers to the way the biological load is processed. In high charged systems, the biological stage is presented with a high organic load and the combined floc and organic material is then oxygenated for a few hours before being charged again with a new load. In the low charged system the biological stage contains a low organic load and is combined with [[Flocculation|flocculate]] for longer times.