Editing Anodizing (section)

===Chromic acid (Type I)===
The oldest anodizing process uses [[chromic acid]]. It is widely known as the Bengough-Stuart process but, due to the safety regulations regarding air quality control, is not preferred by vendors when the additive material associated with type II doesn't break tolerances. In North America, it is known as Type I because it is so designated by the MIL-A-8625 standard, but it is also covered by AMS 2470 and MIL-A-8625 Type IB. In the UK it is normally specified as Def Stan 03/24 and used in areas that are prone to come into contact with propellants etc. There are also Boeing and Airbus standards. Chromic acid produces thinner, 0.5 μm to 18 μm (0.00002" to 0.0007")<ref name="MIL">US Military Specification MIL-A-8625, [http://assist.daps.dla.mil/quicksearch/ ASSIST database] {{webarchive|url=https://web.archive.org/web/20071006205659/http://assist.daps.dla.mil/quicksearch/ |date=2007-10-06 }}</ref> more opaque films that are softer, ductile, and to a degree self-healing. They are harder to dye and may be applied as a pretreatment before painting. The method of film formation is different from using sulfuric acid in that the voltage is ramped up through the process cycle.