Editing Camera (section)

==== Shutter ====
{{Main|Shutter (photography)}}

The shutter, along with the aperture, is one of two ways to control the amount of light entering the camera. The [[Shutter (photography)|shutter]] determines the duration that the light-sensitive surface is exposed to light. The shutter opens, light enters the camera and exposes the film or sensor to light, and then the shutter closes.<ref name="Warren-Camera" /><ref name="Focal">{{Cite encyclopedia|publisher=Elsevier|isbn=978-0-240-80740-9|pages=770–771|last=Rose|first=B|title=The Camera Defined|encyclopedia=The Focal Encyclopedia of Photography|access-date=12 December 2019|date=2007|doi=10.1016/B978-0-240-80740-9.50152-5|url=https://linkinghub.elsevier.com/retrieve/pii/B9780240807409501525|archive-date=14 December 2019|archive-url=https://web.archive.org/web/20191214060334/https://linkinghub.elsevier.com/retrieve/pii/B9780240807409501525|url-status=live|url-access=subscription}}</ref>

There are two types of mechanical shutters: the leaf-type shutter and the focal-plane shutter. The leaf-type uses a circular iris diaphragm maintained under spring tension inside or just behind the lens that rapidly opens and closes when the shutter is released.<ref name="Britannica-Technology" /> [[File: Focal-plane shutter.jpg|thumb|A focal-plane shutter. In this shutter, the metal shutter blades travel vertically.]]
More commonly, a [[focal-plane shutter]] is used.<ref name="Warren-Camera" /> This shutter operates close to the film plane and employs metal plates or cloth curtains with an opening that passes across the light-sensitive surface. The curtains or plates have an opening that is pulled across the film plane during exposure. The focal-plane shutter is typically used in single-lens reflex (SLR) cameras, since covering the film (rather than blocking the light passing through the lens) allows the photographer to view the image through the lens at all times, except during the exposure itself. Covering the film also facilitates removing the lens from a loaded camera, as many SLRs have interchangeable lenses.<ref name="Columbia" /><ref name="Britannica-Technology" />

A [[digital camera]] may use a mechanical or electronic shutter, the latter of which is common in smartphone cameras. Electronic shutters either record data from the entire sensor simultaneously (a global shutter) or record the data line by line across the sensor (a rolling shutter).<ref name="Columbia" /> In movie cameras, a rotary shutter opens and closes in sync with the advancement of each frame of film.<ref name="Columbia" /><ref>{{Cite encyclopedia|title=Motion-picture camera|encyclopedia=Encyclopedia Britannica|access-date=12 December 2019|url=https://www-britannica-com.ezp-prod1.hul.harvard.edu/technology/motion-picture-camera}}{{dead link|date=November 2023}}</ref>

The duration for which the shutter is open is called the ''[[shutter speed]]'' or ''exposure time''. Typical exposure times can range from one second to 1/1,000 of a second, though longer and shorter durations are not uncommon. In the early stages of photography, exposures were often several minutes long. These long exposure times often resulted in blurry images, as a single object is recorded in multiple places across a single image for the duration of the exposure. To prevent this, shorter exposure times can be used. Very short exposure times can capture fast-moving action and eliminate motion blur.<ref name="Philip's">{{Cite encyclopedia|publisher=Philip's|isbn=978-0-19-954609-1|title=Camera|encyclopedia=World Encyclopedia|access-date=12 December 2019|url=https://archive.org/details/worldencyclopedi00oxfo|url-access=registration|year=2004}}</ref><ref name="Britannica-Technology" /><ref name="Columbia" /><ref name="Warren-Camera" /> However, shorter exposure times require more light to produce a properly exposed image, so shortening the exposure time is not always possible.

Like aperture settings, exposure times increment in powers of two. The two settings determine the exposure value (EV), a measure of how much light is recorded during the exposure. There is a direct relationship between the exposure times and aperture settings so that if the exposure time is lengthened one step, but the aperture opening is also narrowed one step, then the amount of light that contacts the film or sensor is the same.<ref name="Warren-Camera" />