Editing Slot machine (section)

===Computerization===
With [[microprocessor]]s now ubiquitous, the computers inside modern slot machines allow manufacturers to assign a different probability to every symbol on every reel. To the player, it might appear that a winning symbol was "so close", whereas in fact the probability is much lower.

In the 1980s in the U.K., machines embodying microprocessors became common. These used a number of features to ensure the payout was controlled within the limits of the gambling legislation. As a coin was inserted into the machine, it could go either directly into the cashbox for the benefit of the owner or into a channel that formed the payout reservoir, with the microprocessor monitoring the number of coins in this channel. The drums themselves were driven by stepper motors, controlled by the processor and with proximity sensors monitoring the position of the drums. A "look-up table" within the software allows the processor to know what symbols were being displayed on the drums to the gambler. This allowed the system to control the level of payout by stopping the drums at positions it had determined. If the payout channel had filled up, the payout became more generous; if nearly empty, the payout became less so (thus giving good control of the odds).