Editing Dynamic random-access memory (section)

====Timing abbreviations====
{|
|
*''t''<sub>CL</sub> – CAS latency
*''t''<sub>CR</sub> – Command rate
*''t''<sub>PTP</sub> – precharge to precharge delay
*''t''<sub>RAS</sub> – RAS active time
*''t''<sub>RCD</sub> – RAS to CAS delay
*''t''<sub>REF</sub> – Refresh period
*''t''<sub>RFC</sub> – Row refresh cycle time
*''t''<sub>RP</sub> – RAS precharge
|
*''t''<sub>RRD</sub> – RAS to RAS delay
*''t''<sub>RTP</sub> – Read to precharge delay
*''t''<sub>RTR</sub> – Read to read delay
*''t''<sub>RTW</sub> – Read to write delay
*''t''<sub>WR</sub> – Write recovery time
*''t''<sub>WTP</sub> – Write to precharge delay
*''t''<sub>WTR</sub> – Write to read delay
*''t''<sub>WTW</sub> – Write to write delay
|}