Editing Horizontal top-bar hive (section)

===Harvesting honey===
The most popular method of harvesting honey from a top-bar hive is by cutting the comb from the top-bar, crushing the comb and straining the honey. This results in honey with a higher pollen content than honey that is extracted by flinging out without crushing the comb. Top-bar hive comb can be extracted by flinging motion e.g. in a hobbyist or commercial rotary extractor, but it can be problematic, because (a) if no foundation was used, the comb will break more easily during rotary movement, (b) top-bar hives combs may use irregular or non-standard sizes that do not fit into commercially available extractors, (c) if the comb is not uniformly flat, it may be difficult to uncap the cells, which is required for rotary extraction and (d) not all rotary extractors have cages or mesh to prevent loose pieces of comb from falling into the drum.

Honey can also be harvested from top-bar comb as cut comb.

As crushing and straining is the most common method for honey harvesting in this type of hive, beeswax is often a by-product of top-bar hive beekeeping.