Open main menu
Home
Random
Recent changes
Special pages
Community portal
Preferences
About Wikipedia
Disclaimers
Incubator escapee wiki
Search
User menu
Talk
Dark mode
Contributions
Create account
Log in
Editing
Microscope
(section)
Warning:
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
log in
or
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
not
fill this in!
===Optical microscope=== {{main|Optical microscope|Digital microscope|USB microscope}} The most common type of microscope (and the first invented) is the [[optical microscope]]. This is an [[optics|optical]] [[measuring instrument|instrument]] containing one or more [[Lens (optics)|lenses]] producing an enlarged image of a sample placed in the focal plane. Optical microscopes have [[refraction|refractive]] glass (occasionally plastic or [[quartz]]), to focus light on the eye or on to another light detector. Mirror-based optical microscopes operate in the same manner. Typical magnification of a light microscope, assuming visible range light, is up to 1,250Γ with a theoretical [[Diffraction-limited system|resolution limit]] of around 0.250 [[micrometre]]s or 250 [[nanometre]]s.<ref name=":0"/> This limits practical magnification to ~1,500Γ. Specialized techniques (e.g., [[Confocal laser scanning microscopy|scanning confocal microscopy]], [[Vertico SMI]]) may exceed this magnification but the resolution is [[diffraction]] limited. The use of shorter wavelengths of light, such as ultraviolet, is one way to improve the spatial resolution of the optical microscope, as are devices such as the [[near-field scanning optical microscope]]. [[Sarfus]] is a recent optical technique that increases the sensitivity of a standard optical microscope to a point where it is possible to directly visualize nanometric films (down to 0.3 nanometre) and isolated nano-objects (down to 2 nm-diameter). The technique is based on the use of non-reflecting substrates for cross-polarized reflected light microscopy. [[Ultraviolet]] light enables the resolution of microscopic features as well as the imaging of samples that are transparent to the eye. [[Near infrared]] light can be used to visualize circuitry embedded in bonded silicon devices, since silicon is transparent in this region of wavelengths. In [[fluorescence microscopy]] many wavelengths of light ranging from the ultraviolet to the visible can be used to cause samples to [[fluorescence|fluoresce]], which allows viewing by eye or with specifically sensitive cameras.[[File:Brightfield phase contrast cell image.jpg|thumb|Unstained cells viewed by typical brightfield (left) compared to phase-contrast microscopy (right)]] [[Phase-contrast microscopy]] is an [[optical microscope|optical microscopic]] illumination technique in which small [[phase shifts]] in the light passing through a transparent specimen are converted into [[amplitude]] or [[contrast (vision)|contrast]] changes in the image.<ref name=":0"/> The use of phase contrast does not require [[staining]] to view the slide. This microscope technique made it possible to study the [[cell cycle]] in live cells. The traditional optical microscope has more recently evolved into the [[digital microscope]]. In addition to, or instead of, directly viewing the object through the [[eyepiece]]s, a type of sensor similar to those used in a [[digital camera]] is used to obtain an image, which is then displayed on a computer monitor. These sensors may use [[CMOS]] or [[charge-coupled device]] (CCD) technology, depending on the application. Digital microscopy with very low light levels to avoid damage to vulnerable biological samples is available using sensitive [[photon counting|photon-counting]] digital cameras. It has been demonstrated that a light source providing pairs of [[Photon entanglement|entangled photons]] may minimize the risk of damage to the most light-sensitive samples. In this application of [[ghost imaging]] to photon-sparse microscopy, the sample is illuminated with infrared photons, each of which is spatially correlated with an entangled partner in the visible band for efficient imaging by a photon-counting camera.<ref name="AspdenGemmell2015">{{cite journal|last1=Aspden|first1=Reuben S. |last2=Gemmell|first2=Nathan R. |last3=Morris|first3=Peter A. |last4=Tasca|first4=Daniel S. |last5=Mertens|first5=Lena |last6=Tanner|first6=Michael G. |last7=Kirkwood|first7=Robert A. |last8=Ruggeri|first8=Alessandro |last9=Tosi|first9=Alberto |last10=Boyd|first10=Robert W. |last11=Buller|first11=Gerald S. |last12=Hadfield |first12=Robert H. |last13=Padgett |first13=Miles J. |title=Photon-sparse microscopy: visible light imaging using infrared illumination |journal=Optica |volume=2 |issue=12 |year=2015 |pages=1049 |issn=2334-2536 |doi=10.1364/OPTICA.2.001049|bibcode=2015Optic...2.1049A |url=http://eprints.gla.ac.uk/112219/1/112219.pdf |doi-access=free }}</ref> [[File:Electron Microscope.jpg|thumb|upright|Modern transmission electron microscope]]
Edit summary
(Briefly describe your changes)
By publishing changes, you agree to the
Terms of Use
, and you irrevocably agree to release your contribution under the
CC BY-SA 4.0 License
and the
GFDL
. You agree that a hyperlink or URL is sufficient attribution under the Creative Commons license.
Cancel
Editing help
(opens in new window)