Editing Push–pull output (section)

==== Square-law push–pull ====
The output devices, usually [[MOSFET]]s or [[vacuum tube]]s, are configured so that their [[Power-law#square-law|square-law]] transfer characteristics (that generate second-harmonic [[distortion]] if used in a single-ended circuit) cancel distortion to a large extent. That is, as one transistor's gate-source voltage increases, the drive to the other device is reduced by the same amount and the drain (or plate) current change in the second device approximately corrects for the non-linearity in the increase of the first.<ref>{{cite journal | author=Ian Hegglun | title=Practical Square-law Class-A Amplifier Design | journal=Linear Audio  |volume=1}}</ref>