Editing Drop and insert

In a [[Channel (broadcasting)|multichannel]] [[transmission system]], '''drop and insert''' is a process that diverts (''drop'') a portion of the multiplexed aggregate [[signal]] at an intermediate point, and introduces (''insert'') a different signal for subsequent transmission in the same position.

Drop and insert is practiced, for example, in [[time-division multiplexing]] (TDM) when a time slot or [[frequency]] [[band (radio)|band]] is replaced from another source. The diverted signal may be [[demodulate]]d or reinserted into another transmission system in the same or another time slot or frequency band. The time slot or frequency band vacated by the diverted signal need not necessarily be reoccupied by another signal. Likewise, a previously unoccupied time slot or frequency band may be occupied by a signal inserted at the drop-and-insert point.

Signals not of interest at the drop-and-insert point are not diverted.

==See also==
* [[Add-drop multiplexer]]

==References==
{{FS1037C MS188}}

[[Category:Multiplexing]]


{{telecomm-stub}}