Editing Electric arc

{{Short description|Electrical breakdown of a gas that results in an ongoing electrical discharge}}
{{For|electricity following an unintended path|short circuit}}
{{More citations needed|date=April 2025}}
[[File:Lichtbogen 3000 Volt.jpg|thumb|right|An electric arc between two [[Nail (fastener)|nails]]]]

An '''electric arc''' (or '''arc discharge''') is an [[electrical breakdown]] of a [[gas]] that produces a prolonged [[electrical discharge]]. The [[electric current|current]] through a normally [[Electrical conductance|nonconductive]] medium such as [[air]] produces a [[plasma (physics)|plasma]], which may produce [[visible light]]. An arc discharge is initiated either by [[thermionic emission]] or by [[field emission]].<ref>{{cite web |title=The Arc Species "Zoo" |date=15 December 2020 |publisher=Arc Suppression Technologies |url=https://arcsuppressiontechnologies.com/arc-suppression-facts/arc-species-zoo/ |accessdate=March 28, 2023}}</ref> After initiation, the arc relies on thermionic emission of electrons from the [[electrode]]s supporting the arc.
An arc discharge is characterized by a lower voltage than a [[glow discharge]].  An archaic term is '''voltaic arc''', as used in the phrase "voltaic arc lamp".

Techniques for [[arc suppression]] can be used to reduce the duration or likelihood of arc formation.

In the late 19th century, [[Arc lamp|electric arc lighting]] was in wide use for [[Street light#Arc lamps|public lighting]].
Some low-pressure electric arcs are used in many applications.  For example, [[fluorescent lamp|fluorescent tubes]], mercury, sodium, and [[metal-halide lamp]]s are used for lighting; [[xenon arc lamp]]s have been used for [[movie projector]]s. Electric arcs can be utilized for manufacturing processes, such as electric [[arc welding]], [[plasma cutting]] and [[electric arc furnace]]s for steel recycling.

==History==
[[File:Lightning NOAA.jpg|left|thumb|Natural [[lightning]] is now considered an [[electric spark]], not an arc.]]
Sir [[Humphry Davy]] discovered the short-pulse electrical arc in 1800.<ref name="anders">{{Cite journal|doi=10.1109/TPS.2003.815477 |title=Tracking down the origin of arc plasma science-II. early continuous discharges |year=2003 |author=A. Anders |journal=IEEE Transactions on Plasma Science |volume=31 |pages=1060–9 |issue=5|bibcode=2003ITPS...31.1060A |s2cid=11047670 |url=https://digital.library.unt.edu/ark:/67531/metadc785757/m2/1/high_res_d/823202.pdf }}</ref> In 1801, he described the phenomenon in a paper published in [[William Nicholson (chemist)|William Nicholson]]'s ''[[Journal of Natural Philosophy, Chemistry and the Arts]]''.<ref>{{cite book |last= Ayrton |first= Hertha |title= Electric Arc (CLASSIC REPRINT) |page=94 |publisher= FORGOTTEN BOOKS |location= S.l |year=2015 |isbn= 978-1330187593 |url= https://archive.org/stream/electricarc00ayrtrich#page/94/mode/2up }}</ref> According to modern science, Davy's description was a spark rather than an arc.<ref>[https://archive.org/stream/electricarc00ayrtrich#page/20/mode/2up ''The Electric Arc'', by Hertha Ayrton, page 20]</ref> In the same year Davy publicly demonstrated the effect, before the [[Royal Society]], by transmitting an [[electric current]] through two [[carbon]] rods that touched, and then pulling them a short distance apart. The demonstration produced a "feeble" arc, not readily distinguished from a sustained [[Electric spark|spark]], between [[charcoal]] points. The Society subscribed for a more powerful battery of 1,000 plates, and in 1808 he demonstrated the large-scale arc.<ref>{{Cite journal |last=Luckiesh |first= Matthew |author-link= Matthew Luckiesh |title= Artificial light, its influence upon civilization |journal= Nature |volume= 107 |issue= 2694 |year=1920 |page=112 |oclc= 1446711|bibcode= 1921Natur.107..486. |doi= 10.1038/107486b0 |hdl= 2027/chi.14153449 |s2cid= 4135392 |url= http://archive.org/details/artificiallighti00luckuoft |hdl-access= free }}</ref>  He is credited with naming the arc.<ref name="Columbia">{{cite encyclopedia |year=1963 |title =Arc |encyclopedia= The Columbia Encyclopedia |publisher= [[Columbia University Press]] |edition=3rd |location= New York |lccn= 63020205}}</ref> He called it an arc because it assumes the shape of an upward bow when the distance between the electrodes is not small.<ref>{{cite book |last=Davy |first= Humphry |title= Elements of Chemical Philosophy |year=1812 |pages=85 |publisher= Cambridge Scholars |isbn=978-0-217-88947-6 |url= https://archive.org/stream/elementschemica00davygoog#page/n102/mode/2up}} This is the likely origin of the term "''arc''".</ref> This is due to the buoyant force on the hot gas.

The first continuous arc was discovered independently in 1802 and described in 1803<ref name="Anders">"[https://ieeexplore.ieee.org/xpl/articleDetails.jsp?tp=&arnumber=1240058 Tracking down the origin of arc plasma Science-II. Early continuous discharges]". by André ANDERS. IEEE ''Xplore'', ieee.org. ''IEEE Transactions on Plasma Science''. Volume: 31, issue: 5, Oct 2003.</ref> as a "special fluid with electrical properties", by [[Vasily V. Petrov]], a Russian scientist experimenting with a [[Voltaic pile|copper-zinc battery]] consisting of 4200 discs.<ref name=Anders/><ref>{{cite book |last=Kartsev |first=V.P. |editor= Shea, William R. |title= Nature Mathematized |year=1983 |publisher= [[Kluwer Academic]] |location= Boston, MA |isbn= 978-90-277-1402-2 |page=279}}</ref>

In the late nineteenth century, [[Arc lamp|electric arc lighting]] was in wide use for [[Street light#Arc lamps|public lighting]]. The tendency of electric arcs to flicker and hiss was a major problem. In 1895, [[Hertha Marks Ayrton]] wrote a series of articles for the ''Electrician'', explaining that these phenomena were the result of oxygen coming into contact with the carbon rods used to create the arc. In 1899, she was the first woman ever to read her own paper before the Institution of Electrical Engineers (IEE). Her paper was entitled "The Hissing of the Electric Arc". Shortly thereafter, Ayrton was elected the first female member of the IEE; the next woman to be admitted to the IEE was in 1958.<ref name=oxdnb>{{cite ODNB |last=Mason |first=Joan |title= Sarah Ayrton |id=37136}}</ref> She petitioned to present a paper before the Royal Society, but she was not allowed because of her gender, and "The Mechanism of the Electric Arc" was read by John Perry in her stead in 1901.

==Overview==
[[File:ER2R with electric arcs after catenary icing.webm |thumb |thumbtime=4 |right|Electric arcs between the power line and [[Pantograph (transport)|pantographs]] of an electric train after [[Overhead line|catenary]] icing]]
[[File:Arcing pickup shoe.jpg |thumb |right |Electricity arcs between the power rail and electrical pickup "shoe" on a [[London Underground]] train]]
An electric arc is the form of electric discharge with the highest current density. The maximum current through an arc is limited only by the external circuit, not by the arc itself.

An arc between two electrodes can be initiated by ionization and glow discharge, when the current through the electrodes is increased.  The breakdown voltage of the electrode gap is a combined function of the pressure, distance between electrodes and type of gas surrounding the electrodes. When an arc starts, its terminal voltage is much less than a glow discharge, and current is higher. An arc in gases near atmospheric pressure is characterized by visible light emission, high current density, and high temperature. An arc is distinguished from a glow discharge partly by the similar temperatures of the electrons and the positive ions; in a glow discharge, the ions are much colder than the electrons.

A drawn arc can be initiated by two electrodes initially in contact and drawn apart; this can initiate an arc without the high-voltage glow discharge. This is the way a [[arc welding|welder]] starts to weld a joint, momentarily touching the welding electrode against the workpiece then withdrawing it until a stable arc is formed. Another example is separation of electrical contacts in switches, relays or circuit breakers; in high-energy circuits [[arc suppression]] may be required to prevent damage to contacts.<ref name=Howatson65>{{Cite journal |last=Howatson |first=A.M. |s2cid=37226480 |title= An Introduction to Gas Discharges |journal=Plasma Sources Science and Technology 	 |volume=9 |issue=4 |year=1965 |isbn=978-0-08-020575-5 |pages=47–101|bibcode=2000PSST....9..517B |doi=10.1088/0963-0252/9/4/307 }}</ref>

Electrical resistance along the continuous electric arc creates heat, which ionizes more gas molecules (where the degree of ionization is determined by temperature), and as per this sequence: solid-liquid-gas-plasma; the gas is gradually turned into a thermal plasma. A thermal [[plasma (physics)|plasma]] is in thermal equilibrium; the temperature is relatively homogeneous throughout the atoms, molecules, ions, and electrons. The energy given to electrons is dispersed rapidly to the heavier particles by [[elastic collision]]s, due to their great mobility and large numbers.

Current in the arc is sustained by [[thermionic emission]]  and [[field emission]] of electrons at the cathode. The current may be concentrated in a very small hot spot on the cathode; current densities on the order of one million [[amperes]] per square centimeter can be found. Unlike a [[glow discharge]], an arc has little discernible structure, since the positive column is quite bright and extends nearly to the electrodes on both ends.  The cathode fall and anode fall of a few volts occur within a fraction of a millimeter of each electrode. The positive column has a lower voltage gradient and may be absent in very short arcs.<ref name=Howatson65/>

A low-frequency (less than 100&nbsp;Hz) alternating current arc resembles a direct current arc; on each cycle, the arc is initiated by breakdown, and the electrodes interchange roles, as anode or cathode, when current reverses.  As the frequency of the current increases, there is not enough time for all ionization to disperse on each half cycle, and the breakdown is no longer needed to sustain the arc; the voltage vs. current characteristic becomes more nearly ohmic.<ref name=Howatson65/>

[[File:Electric arc.jpg|thumb|Electric arc between strands of wire.]]
The various shapes of electric arcs are [[emergence|emergent properties]] of non-linear patterns of current and [[electric field]]. The arc occurs in the gas-filled space between two conductive [[electrodes]] (often made of [[tungsten]] or carbon) and it results in a very high [[temperature]], capable of [[melting]] or [[Evaporation|vaporizing]] most materials. An electric arc is a continuous discharge, while the similar [[electric spark]] discharge is momentary. An electric arc may occur either in [[direct current]] (DC) circuits or in [[alternating current]] (AC) circuits. In the latter case, the arc may re-strike on each half cycle of the current. An electric arc differs from a [[glow discharge]] in that the current density is quite high, and the voltage drop within the arc is low; at the [[cathode]], the current density can be as high as one [[megaampere]] per square centimeter.<ref name=Howatson65/>

An electric arc has a non-linear relationship between current and voltage. Once the arc is established (either by progression from a glow discharge<ref>{{cite book |last=Mehta |first=V.K. |title= Principles of Electronics: for Diploma, AMIE, Degree & Other Engineering Examinations |year=2005 |publisher=S. Chand |location= New Delhi |isbn= 978-81-219-2450-4 |pages=101–107 |edition=9th, multicolour illustrative }}</ref> or by momentarily touching the electrodes then separating them), increased current results in a lower voltage between the arc terminals. This [[negative resistance]] effect requires that some positive form of [[Electrical impedance|impedance]] (as an [[electrical ballast]]) be placed in the circuit to maintain a stable arc.  This property is the reason uncontrolled electrical arcs in apparatus become so destructive, since once initiated an arc will draw more and more current from a fixed-voltage supply until the apparatus is destroyed.

There exists a form of moving electric arc known as a gliding arc discharge, initiated at the shortest gap between diverging electrodes placed in a fast gas flow (typically over 10 m/s). The discharge moves ("glides") progressively along the electrodes in the direction of gas flow until it breaks and extinguishes. This continual movement of the arc roots prevents electrode erosion and allows direct and efficient transfer of electrical energy into the flowing gas. Initially, the plasma formed is close to [[thermodynamic equilibrium]] but as the arc elongates, it rapidly transitions into a [[Non-equilibrium thermodynamics|non-equilibrium]], [[nonthermal plasma]] characterized by significant temperature differences between electrons and gas molecules.<ref>{{cite journal |last=Czernichowski |first=Albin |title=Gliding arc: Applications to engineering and environment control |journal=Pure and Applied Chemistry |volume=66 |issue=6 |year=1994 |pages=1301–1310 |doi=10.1351/pac199466061301}}</ref><ref>{{cite journal |last1=Fridman |first1=Alexander |last2=Nester |first2=Sergei |last3=Kennedy |first3=Lawrence A. |last4=Saveliev |first4=Alexei |last5=Mutaf-Yardimci |first5=Ozlem |title=Gliding arc gas discharge |journal=Progress in Energy and Combustion Science |volume=25 |issue=2 |year=1999 |pages=211–231 |issn=0360-1285 |doi=10.1016/S0360-1285(98)00021-5 |bibcode=1999PECS...25..211F |url=https://www.sciencedirect.com/science/article/pii/S0360128598000215|url-access=subscription }}</ref>

==Uses==
[[File:CaOmelt1.jpg |thumb|An electric arc can melt [[calcium oxide]]]]
Industrially, electric arcs are used for [[welding]], [[plasma cutting]], for [[electrical discharge machining]], as an [[arc lamp]] in [[movie projector]]s, and [[spotlight (theatre lighting)|spotlights]] in [[stage lighting]]. [[Electric arc furnace]]s are used to produce [[steel]] and other substances. [[Calcium carbide]] is made in this way as it requires a large amount of energy to promote an [[endothermic]] [[Chemical reaction|reaction]] (at temperatures of 2500&nbsp;°C).

[[Arc lamp|Carbon arc lights]] were the first electric lights. They were used for street lights in the 19th century and for specialized applications such as [[searchlight]]s until World War II. Today, electric arcs are used in many applications.  For example, [[fluorescent lamp|fluorescent tubes]], mercury, sodium, and [[metal halide lamp]]s are used for lighting; [[xenon arc lamp]]s are used for movie projectors and theatrical spotlights.

Formation of an intense electric arc, similar to a small-scale [[arc flash]], is the foundation of [[exploding-bridgewire detonator]]s.

Electric arcs are used in [[arcjet]], a form of [[Electrically powered spacecraft propulsion|electric propulsion]] of spacecraft.

They are used in the laboratory for [[spectroscopy]] to create spectral emissions by intense heating of a sample of [[matter]].

=== Protection of electrical equipment ===
{{Unreferenced section|date=April 2025}}
Arc is still being used in high voltage switchgear for protection of  [[extra high voltage]] transmission networks. To protect a unit (e. g., a [[Series connection|series]] [[capacitor]] in a transmission line) against overvoltage, an arc-inducing device, so called [[spark gap]], is connected in parallel to the unit. Once the voltage reaches the air-breakdown threshold, an arc ignites across the spark plug and short-circuits the terminals of the unit, thus protecting the latter from the overvoltage. For the ''reinsertion'' of a unit, the arc needs to be extinguished, this can be achieved in multiple ways. For example, a spark gap can be fitted with [[arcing horns]] − two wires, approximately vertical but gradually diverging from each other towards the top in a narrow ''V'' shape. Once ignited, the arc will move upwards along the wires and will break down when the distance between the wires will become too large. If the arc is extinguished and the original trigger condition no longer exists (a fault has been resolved or a bypass switch engaged), the arc will not reignite. The arc can be also broken by a blast of compressed air or another gas.

An undesirable arc can also occur when a high-voltage switch is opened and is extinguished in similar ways. Modern devices use [[sulphur hexafluoride]] at high pressure in a nozzle flow between separated electrodes within a pressurized vessel. The arc current is interrupted at the moment within an AC cycle when the current goes to zero and the highly electronegative SF<sub>6</sub> ions quickly absorb free electrons from the decaying plasma. The SF<sub>6</sub> technology mostly displaced the similar air-based one because many noisy air-blast units in series were required to prevent the arc inside the switch from re-igniting.

===Visual entertainment===<!-- This section is linked from [[Oscilloscope]] and [[Jacob's ladder (apparatus)]] -->
[[Image:Jacobs Ladder HM.jpg|thumb|left|upright|A time exposure of a Jacob's ladder]]
[[File:Jakobsleiter-ani.gif|thumb|A demonstration of Jacob's ladder]]
[[File:Jakobsleiter.ogv|right|thumb|start=3|Jacob's ladder at work]]

A <span id="#Spark gaps as entertainment">Jacob's ladder</span> (more formally, a '''high voltage travelling arc''') is a device for producing a continuous train of electric arcs that rise upwards. The device is named for the [[Jacob's Ladder]] leading to [[heaven]] as described in the Bible. Similarly to the arcing horns, the spark gap is formed by two wires diverging from the base to the top.

When high voltage is applied to the gap, a spark forms across the bottom of the wires where they are nearest each other, rapidly changing to an electric arc. Air breaks down at about 30&nbsp;kV/cm,<ref name="air breakdown">{{cite journal |author=J. J. Lowke |title=Theory of electrical breakdown in air |journal=Journal of Physics D: Applied Physics |volume=25 |issue= 2|pages=202–210 |year=1992 |url=https://massless.info/images/jd920212.pdf|doi=10.1088/0022-3727/25/2/012|bibcode = 1992JPhD...25..202L |s2cid=250794264 }}</ref> depending on humidity, temperature, etc. Apart from the anode and cathode voltage drops, the arc behaves almost as a [[short circuit]], drawing as much current as the electrical [[power supply]] can deliver, and the heavy [[Electrical load|load]] dramatically reduces the voltage across the gap.

The heated ionized air rises, carrying the current path with it. As the trail of ionization gets longer, it becomes more and more unstable, finally breaking. The voltage across the electrodes then rises and the spark re-forms at the bottom of the device.

This cycle leads to an exotic-looking display of electric white, yellow, blue or purple arcs, which is often seen in [[horror film]]s and films about [[mad scientist]]s. The device was a staple in schools and [[science fair]]s of the 1950s and 1960s, typically constructed out of a [[Ignition system#Switchable systems|Model T spark coil]] or any other source of high voltage in the 10,000–30,000-volt range, such as a [[neon sign transformer]] (5–15 kV) or a television picture tube circuit ([[flyback transformer]]) (10–28 kV), and two coat hangers or rods built into a ''V'' shape. For larger ladders, [[microwave oven]] transformers connected in series, [[voltage multiplier]]s<ref>{{cite web |url=http://www.sci-experiments.com/ResonantHVSupply/ |title=Resonant High Voltage Supplies |access-date=2015-05-07 |url-status=dead |archive-url=https://web.archive.org/web/20150518101414/http://www.sci-experiments.com/ResonantHVSupply/ |archive-date=2015-05-18 }}</ref><ref>{{cite web|url=http://rimstar.org/science_electronics_projects/high_voltage_power_supply_w_flyback_transformer_builtin_diodes.htm|title=20kV DC power supply (homemade/DIY) using flyback with built in diodes|website=rimstar.org}}</ref> and utility pole transformers (pole pigs) run in reverse (step-up) are commonly used.

{{Commons category-inline|Jacob's ladder (electrical)|Jacob's ladder}}

===Guiding the arc===
Scientists have discovered a method to control the path of an arc between two electrodes by firing laser beams at the gas between the electrodes. The gas becomes a plasma and guides the arc.  By constructing the plasma path between the electrodes with different laser beams, the arc can be formed into curved and S-shaped paths. The arc could also hit an obstacle and reform on the other side of the obstacle. The laser-guided arc technology could be useful in applications to deliver a spark of electricity to a precise spot.<ref>{{Cite web |title= Laser beams make lightning tunnels |url= https://www.science.org/content/article/laser-beams-make-lightning-tunnels |access-date= 2015-06-20}}</ref><ref>{{Cite journal |title= Laser-assisted guiding of electric discharges around objects |journal= Science Advances |date = 2015-06-01 |issn= 2375-2548 |pages= e1400111 |volume= 1 |issue=5 |doi= 10.1126/sciadv.1400111 |language= en |first1= Matteo |last1= Clerici |first2= Yi |last2= Hu |first3= Philippe |last3 = Lassonde|first4 = Carles |last4= Milián |first5= Arnaud |last5 = Couairon |first6= Demetrios N. |last6= Christodoulides |first7= Zhigang |last7= Chen |first8= Luca |last8= Razzari |first9 = François |last9= Vidal |bibcode= 2015SciA....1E0111C |pmid= 26601188 |pmc= 4640611}}</ref>

==Undesired arcing==<!--section linked from Snubber-->
{{unreferenced section|date=July 2013}}
[[File:Enchufe Quemado.jpg|thumb|A burn in a plug caused by an electric arc during a [[short circuit]].]]
Undesired or unintended electric arcing can have detrimental effects on [[electric power transmission]], [[Electric power distribution|distribution]] systems and [[electronics|electronic]] equipment. Devices which may cause arcing include switches, circuit breakers, relay contacts, fuses and poor cable terminations. When an [[inductance|inductive]] circuit is switched off, the current cannot instantaneously jump to zero: a transient arc will be formed across the separating contacts. Switching devices susceptible to arcing are normally designed to contain and extinguish an arc, and [[snubber]] circuits can supply a path for transient currents, preventing arcing. If a circuit has enough current and voltage to sustain an arc formed outside of a switching device, the arc can cause damage to equipment such as melting of conductors, destruction of insulation, and fire. An [[arc flash]] describes an explosive electrical event that presents a hazard to people and equipment.

Undesired arcing in electrical contacts of [[contactors]], relays and switches can be reduced by devices such as contact arc suppressors<ref>{{cite web | title = Arc Suppression | url = http://www.electronic-components.com.au/products-services/arc-suppression/ | access-date = December 6, 2013}}</ref> and [[Snubber#RC snubbers|RC snubbers]] or through techniques including:
* immersion in [[transformer oil]], [[dielectric gas]] or [[vacuum]]
* [[arc chute]]s
* [[magnetic blowout]]s
* pneumatic blowouts
* sacrificial ("arcing") contacts
* damping materials to absorb arc energy, either thermally or through chemical decomposition

Arcing can also occur when a low resistance channel (foreign object, conductive [[dust]], moisture...) forms between places with different voltage. The conductive channel then can facilitate formation of an electric arc. The ionized air has high electrical conductivity approaching that of metals, and it can conduct extremely high currents, causing a [[short circuit]] and tripping protective devices ([[fuse (electrical)|fuses]] and [[circuit breaker]]s). A similar situation may occur when a [[lightbulb]] burns out and the fragments of the filament pull an electric arc between the leads inside the bulb, leading to overcurrent that trips the breakers.

An electric arc over the surface of [[plastic]]s causes their degradation. A conductive carbon-rich track tends to form in the arc path, called "carbon tracking", negatively influencing their insulation properties. The arc susceptibility, or "track resistance", is tested according to [[ASTM]] D495, by point electrodes and continuous and intermittent arcs; it is measured in seconds required to form a track that is conductive under high-voltage low-current conditions.<ref>{{cite book |title=Plastics Materials and Processes: A Concise Encyclopedia |first1=Charles A. |last1=Harper |first2=Edward M. |last2=Petrie |publisher=[[John Wiley & Sons]] |date=2003 |isbn=9780471456032 |page=565 }}</ref> Some materials are less susceptible to degradation than others. For example, [[polytetrafluoroethylene]] has arc resistance of about 200 seconds (3.3 minutes). From [[thermosetting plastic]]s, [[alkyd]]s and [[melamine resin]]s are better than [[phenolic resin]]s. [[Polyethylene]]s have arc resistance of about 150 seconds; [[polystyrene]]s and [[polyvinyl chloride]]s have relatively low resistance of about 70 seconds. Plastics can be formulated to emit gases with arc-extinguishing properties; these are known as ''arc-extinguishing plastics''.<ref>{{harvnb|Harper|Petrie|2003|p=???}}{{page needed|date=October 2017}}</ref>

Arcing over some types of [[printed circuit board]]s, possibly due to cracks of the traces or the failure of a solder joint, renders the affected insulating layer conductive as the dielectric is [[Combustion|combusted]] due to the high temperatures involved. This conductivity prolongs the arcing due to [[cascading failure]] of the surface.

==Arc suppression==
{{main|Arc suppression}}

Arc suppression is a method of attempting to reduce or eliminate an electrical arc. There are several possible areas of use of arc suppression methods, among them [[Sputter deposition|metal film deposition and sputtering]], [[Arc flash#Protecting personnel|arc flash protection]], electrostatic processes where electrical arcs are not desired (such as [[powder painting]], [[Air purifier|air purification]], [[Polyvinylidene fluoride|PVDF]] film poling) and contact current arc suppression. In industrial, military and consumer electronic design, the latter method generally applies to devices such as electromechanical power switches, relays and contactors. In this context, arc suppression uses [[contact protection]].

Part of the energy of an electrical arc forms new chemical compounds from the air surrounding the arc: these include [[Nitrogen oxide|oxides of nitrogen]] and [[ozone]], the second of which can be detected by its distinctive sharp smell. These chemicals can be produced by high-power contacts in relays and motor commutators, and they are corrosive to nearby metal surfaces. Arcing also erodes the surfaces of the contacts, wearing them down and creating high contact resistance when closed.<ref>{{cite web | title = Lab Note #106 ''Environmental Impact of Arc Suppression'' | publisher = Arc Suppression Technologies | date = April 2011 | url = http://www.arcsuppressiontechnologies.com/arc-suppression-facts/lab-app-notes/ | access-date = October 10, 2011}}</ref>

==Health hazards==
Exposure to an arc-producing device can pose health hazards. An arc formed in air will ionize oxygen and nitrogen, which then can re-form into reactive molecules such as [[ozone]] and [[nitric oxide]]. These products can be damaging to the [[mucous membranes]]. Plants are also susceptible to ozone poisoning. These hazards are greatest when the arc is continuous and in an enclosed space such as a room. An arc that occurs outside is less of a hazard because the heated ionized gases will rise up into the air and dissipate into the atmosphere. Spark gaps which only intermittently produce short spark bursts are also minimally hazardous because the volume of ions generated is very small.

Arcs can also produce a broad spectrum of wavelengths spanning the visible light and the invisible ultraviolet and infrared spectrum. Very intense arcs generated by means such as [[arc welding]] can produce significant amounts of ultraviolet radiation which is [[Photokeratitis|damaging to the cornea of the observer]]. These arcs should only be observed through special dark filters which reduce the arc intensity and shield the observer's eyes from the ultraviolet rays.

==See also==
* [[Arc transmitter]]
* [[List of light sources]]
* [[Marx generator]]
* [[Spark gap]]
* [[Vacuum arc]]
* [[Paschen's law]]

==References==
{{Reflist|30em}}

== External links ==
{{Commons category|Electric arc}}
* [https://web.archive.org/web/20050731082248/http://205.243.100.155/frames/longarc.htm "High Voltage Arcs and Sparks"] Videos of 230 kV 3-phase "Jacobs Ladder" and unintentional 500 kV power arc
* [https://web.archive.org/web/20080122114954/http://www.cirris.com/testing/voltage/arc.html High Voltage Arc Gap Calculator] to calculate the length of an arc knowing the voltage or vice versa

{{Authority control}}

[[Category:Electric arcs| ]]
[[Category:Electric heating]]
[[Category:Electrical discharge in gases]]
[[Category:Articles containing video clips]]