Editing Hyperelliptic curve cryptography

{{Too technical|date=June 2024}}

'''Hyperelliptic curve cryptography''' is similar to [[elliptic curve cryptography]] (ECC) insofar as the [[Imaginary hyperelliptic curve|Jacobian]] of a [[hyperelliptic curve]] is an [[abelian group]] in which to do arithmetic, just as we use the [[Group (mathematics)|group]] of points on an elliptic curve in ECC.

==Definition==
An [[Imaginary hyperelliptic curve|(imaginary) hyperelliptic curve]] of [[genus (mathematics)|genus]] <math>g</math> over a field <math>K</math> is given by the equation <math>C : y^2 + h(x) y = f(x) \in K[x,y]</math> where <math>h(x) \in K[x]</math> is a polynomial of degree not larger than <math>g</math> and <math>f(x) \in K[x]</math> is a monic polynomial of degree <math>2g + 1</math>. From this definition it follows that elliptic curves are hyperelliptic curves of genus 1. In hyperelliptic curve cryptography <math>K</math> is often a [[finite field]]. The Jacobian of <math>C</math>, denoted <math>J(C)</math>, is a [[quotient group]], thus the elements of the Jacobian are not points, they are equivalence classes of [[Imaginary hyperelliptic curve|divisors]] of degree 0 under the relation of [[linear system of divisors|linear equivalence]]. This agrees with the elliptic curve case, because it can be shown that the Jacobian of an elliptic curve is isomorphic with the group of points on the elliptic curve.<ref>{{cite journal |url=http://www.hyperelliptic.org/tanja/conf/summerschool07/talks/Dechene_Picard.pdf |first=Isabelle |last=Déchène |year=2007 |title=The Picard Group, or how to build a group from a set |journal=Tutorial on Elliptic and Hyperelliptic Curve Cryptography 2007 }}</ref> The use of hyperelliptic curves in cryptography came about in 1989 from [[Neal Koblitz]]. Although introduced only 3 years after ECC, not many cryptosystems implement hyperelliptic curves because the implementation of the arithmetic isn't as efficient as with cryptosystems based on elliptic curves or factoring ([[RSA (algorithm)|RSA]]). The efficiency of implementing the arithmetic depends on the underlying finite field <math>K</math>, in practice it turns out that finite fields of [[characteristic (algebra)|characteristic]] 2 are a good choice for hardware implementations while software is usually faster in odd characteristic.<ref>{{cite journal |first1=P. |last1=Gaudry |first2=D. |last2=Lubicz |title=The arithmetic of characteristic 2 Kummer surfaces and of elliptic Kummer lines |journal=Finite Fields and Their Applications |volume=15 |issue=2 |year=2009 |pages=246–260 |doi=10.1016/j.ffa.2008.12.006 |doi-access=free }}</ref>

The Jacobian on a hyperelliptic curve is an Abelian group and as such it can serve as group for the [[discrete logarithm| discrete logarithm problem]] (DLP). In short, suppose we have an Abelian group <math>G</math> and <math>g</math> an element of <math>G</math>, the DLP on <math>G</math> entails finding the integer <math>a</math> given two elements of <math>G</math>, namely <math>g</math> and <math>g^a</math>. The first type of group used was the multiplicative group of a finite field, later also Jacobians of (hyper)elliptic curves were used. If the hyperelliptic curve is chosen with care, then [[Pollard's rho algorithm|Pollard's rho method]] is the most efficient way to solve DLP. This means that, if the Jacobian has <math>n</math> elements, that the running time is exponential in <math>\log(n)</math>. This makes it possible to use Jacobians of a fairly small [[order (group theory)|order]], thus making the system more efficient. But if the hyperelliptic curve is chosen poorly, the DLP will become quite easy to solve. In this case there are known attacks which are more efficient than generic discrete logarithm solvers<ref>{{cite book |first=N. |last=Th'eriault |chapter=Index calculus attack for hyperelliptic curves of small genus |title=Advances in Cryptology - ASIACRYPT 2003 |year=2003 |location=New York |publisher=Springer |isbn=978-3540406747 }}</ref> or even subexponential.<ref>{{cite journal |first=Andreas |last=Enge |title=Computing discrete logarithms in high-genus hyperelliptic Jacobians in provably subexponential time |journal=Mathematics of Computation |volume=71 |issue=238 |pages=729–742 |year=2002 |doi=10.1090/S0025-5718-01-01363-1 |bibcode=2002MaCom..71..729E |doi-access=free }}</ref> Hence these hyperelliptic curves must be avoided. Considering various attacks on DLP, it is possible to list the features of hyperelliptic curves that should be avoided.

==Attacks against the DLP==
All [[Discrete logarithm problem#Algorithms|generic attacks]] on the [[discrete logarithm problem]] in finite abelian groups such as the [[Pohlig–Hellman algorithm]] and [[Pollard's rho algorithm for logarithms|Pollard's rho method]] can be used to attack the DLP in the Jacobian of hyperelliptic curves. The Pohlig-Hellman attack reduces the difficulty of the DLP by looking at the order of the group we are working with. Suppose the group <math>G</math> that is used has <math>n = p_1^{r_1} \cdots p_k^{r_k}</math> elements, where <math>p_1^{r_1} \cdots p_k^{r_k}</math> is the prime factorization of <math>n</math>. Pohlig-Hellman reduces the DLP in <math>G</math> to DLPs in subgroups of order <math>p_i</math> for <math>i = 1,...,k</math>. So for <math>p</math> the largest prime divisor of <math>n</math>, the DLP in <math>G</math> is just as hard to solve as the DLP in the subgroup of order <math>p</math>. Therefore, we would like to choose <math>G</math> such that the largest prime divisor <math>p</math> of <math>\#G = n</math> is almost equal to <math>n</math> itself. Requiring <math display=inline>\frac{n}{p} \leq 4</math> usually suffices.

The [[index calculus algorithm]] is another algorithm that can be used to solve DLP under some circumstances. For Jacobians of (hyper)elliptic curves there exists an index calculus attack on DLP. If the genus of the curve becomes too high, the attack will be more efficient than Pollard's rho. Today it is known that even a genus of <math>g=3</math> cannot assure security.<ref>[http://homes.esat.kuleuven.be/~fvercaut/papers/cc03.pdf Jasper Scholten and Frederik Vercauteren, An Introduction to Elliptic and Hyperelliptic Curve Cryptography and the NTRU Cryptosystem], section 4</ref> Hence we are left with elliptic curves and hyperelliptic curves of genus 2.

Another restriction on the hyperelliptic curves we can use comes from the Menezes-Okamoto-Vanstone-attack / Frey-Rück-attack. The first, often called MOV for short, was developed in 1993, the second came about in 1994. Consider a (hyper)elliptic curve <math>C</math> over a finite field <math>\mathbb{F}_{q}</math> where <math>q</math> is the power of a prime number. Suppose the Jacobian of the curve has <math>n</math> elements and <math>p</math> is the largest prime divisor of <math>n</math>. For <math>k</math> the smallest positive integer such that <math>p | q^k - 1</math> there exists a computable [[injective function|injective]] [[group homomorphism]] from the subgroup of <math>J(C)</math> of order <math>p</math> to <math>\mathbb{F}_{q^k}^{*}</math>. If <math>k</math> is small, we can solve DLP in <math>J(C)</math> by using the index calculus attack in <math display=inline>\mathbb{F}_{q^k}^{*}</math>. For arbitrary curves <math>k</math> is very large (around the size of <math>q^g</math>); so even though the index calculus attack is quite fast for multiplicative groups of finite fields this attack is not a threat for most curves. The injective function used in this attack is a [[Pairing#Pairings in cryptography|pairing]] and there are some applications in cryptography that make use of them. In such applications it is important to balance the hardness of the DLP in <math>J(C)</math> and <math display=inline>\mathbb{F}_{q^k}^{*}</math>; depending on the [[security level]] values of <math>k</math> between 6 and 12 are useful.
The subgroup of <math display=inline>\mathbb{F}_{q^k}^{*}</math> is a [[torus]]. There exists some independent usage in [[torus based cryptography]].

We also have a problem, if <math>p</math>, the largest prime divisor of the order of the Jacobian, is equal to the characteristic of <math>\mathbb{F}_{q}.</math> By a different injective map we could then consider the DLP in the additive group <math>\mathbb{F}_q</math> instead of DLP on the Jacobian. However, DLP in this additive group is trivial to solve, as can easily be seen. So also these curves, called anomalous curves, are not to be used in DLP.

==Order of the Jacobian==
Hence, in order to choose a good curve and a good underlying finite field, it is important to know the order of the Jacobian. Consider a hyperelliptic curve <math display=inline>C</math> of genus <math display=inline>g</math> over the field <math display=inline>\mathbb{F}_{q}</math> where <math display=inline>q</math> is the power of a prime number and define <math display=inline>C_k</math> as <math display=inline>C</math> but now over the field <math display=inline>\mathbb{F}_{q^k}</math>. It can be shown that the order of the Jacobian of <math display=inline>C_k</math> lies in the interval <math display=inline>[(\sqrt{q}^{k} - 1)^{2g}, (\sqrt{q}^{k} + 1)^{2g}]</math>, called the Hasse-Weil interval.<ref>[http://www.math.uwaterloo.ca/~ajmeneze/publications/hyperelliptic.pdf Alfred J. Menezes, Yi-Hong Wu, Robert J. Zuccherato, An elementary introduction to hyperelliptic curves], page 30</ref> 

But there is more, we can compute the order using the zeta-function on hyperelliptic curves. Let <math display=inline>A_k</math> be the number of points on <math display=inline>C_k</math>. Then we define the zeta-function of <math display=inline>C = C_1</math> as <math display=inline>Z_{C}(t) = \exp(\sum_{i = 1}^{\infty}{A_i \frac{t^i}{i}})</math>. For this zeta-function it can be shown that <math display=inline>Z_C(t) = \frac{P(t)}{(1-t)(1-qt)}</math> where <math display=inline>P(t)</math> is a polynomial of degree <math display=inline>2g</math> with coefficients in <math display=inline>\mathbb{Z}</math>.<ref>[http://www.math.uwaterloo.ca/~ajmeneze/publications/hyperelliptic.pdf Alfred J. Menezes, Yi-Hong Wu, Robert J. Zuccherato, An elementary introduction to hyperelliptic curves], page 29</ref> Furthermore <math display=inline>P(t)</math> factors as <math display=inline>P(t) = \prod_{i = 1}^{g}{(1-a_it)(1-\bar{a_i}t)}</math> where <math display=inline>a_i \in \mathbb{C}</math> for all <math display=inline>i = 1,...,g</math>. Here <math display=inline>\bar{a}</math> denotes the [[complex conjugate]] of <math>a</math>. Finally we have that the order of <math display=inline>J(C_k)</math> equals <math display=inline>\prod_{i = 1}^{g}{|1 - a_i^k|^2}</math>. Hence orders of Jacobians can be found by computing the roots of <math display=inline>P(t)</math>.

==References==
{{Reflist}}

==External links==
* Colm Ó hÉigeartaigh [https://web.archive.org/web/20070217223321/http://www.computing.dcu.ie/~coheigeartaigh/crypto.html Implementation of some hyperelliptic curves algorithms] using [https://web.archive.org/web/20121114015633/http://certivox.com/solutions/miracl-crypto-sdk/ MIRACL]
* DJ Bernstein [https://cr.yp.to/hecdh.html Surface1271: high-speed genus-2-hyperelliptic-curve cryptography] &ndash; incomplete work from 2006 intending to produce a Diffie–Hellman variant, but stalled due to difficulties in choosing surfaces (in turn because point-counting for large surfaces is unavailable). Contains software for the Pentium M scalar multiplication on a Kummer surface.
{{Cryptography navbox | public-key}}

{{DEFAULTSORT:Hyperelliptic Curve Cryptography}}
[[Category:Public-key cryptography]]
[[Category:Elliptic curve cryptography]]