Editing Insect collecting

{{Short description|Hobby}}
{{For|the scientific study of insects|Entomology}}
{{More citations needed|date=March 2018}}
[[File:Beetle collection.jpg|thumb|upright=1.35|[[Beetle]] collection at the [[Melbourne Museum]], Australia]]

'''Insect collecting''' refers to the collection of [[insect]]s and other [[arthropod]]s for scientific study or as a [[hobby]].<ref name="Manoj K. 2022">Manoj K., Ranjan R., Sinha M. P., Dhan A., Naaz F., Khanum G., Rani K. A., Sharma S., Raipat B. S. (2022). A Review on Insect Collection and Preservation Techniques. European Journal of Pharmaceutical and Medical Research, 9(7): 233-239.</ref> Most insects are small and the majority cannot be identified without the examination of minute morphological characters, so [[entomologist]]s often make and maintain insect collections. Very large collections are preserved in [[natural history museum]]s or [[University|universities]] where they are maintained and studied by specialists. Many college courses require students to form small collections. There are also amateur entomologists and collectors who keep collections.

Historically, insect collecting has been widespread and was in the [[Victorian age]] a very popular educational [[hobby]]. Insect collecting has left traces in European [[cultural history]], literature and songs, e.g., [[Georges Brassens]]'s ''La chasse aux papillons'' (''The Hunt for Butterflies''). The practice is particularly common among [[Japan]]ese youths.{{citation needed|date=January 2014}}

==Capture and kill techniques==
{{further|Insect trap}}
[[File:Kerfjagd_Graber_1877.jpg |alt=An old black and white drawing of seven men in a wooded area, catching insects in various ways|thumb|1877 illustration showing a variety of collection techniques]]
[[File:Robinson trap.jpg|alt=A large circular machine sitting on an outdoor table|thumb|A [[Robinson light trap]] for collecting moths]]

Insects may be passively caught using traps such as [[Tullgren funnel|funnels]], [[pitfall trap]]s, [[Bottle trap for insects|bottle traps]], [[Malaise Trap|malaise traps]], or [[flight interception trap]]s, some of which are baited with small bits of sweet foods (such as honey). Entomologists collecting nocturnal insects (especially moths) during faunistic survey studies might utilize [[ultraviolet light]] traps such as the [[Robinson trap]]. [[Aspirator (entomology)|Aspirators]], sometimes called "pooters", suck up insects too small or delicate to handle with fingers.<ref name=" Martin, J.E.H. 1977 " >Martin, J.E.H. 1977. Collecting, preparing and preserving insects, mites, and spiders. The Insects and Arachnids of Canada, Part 1. Publ. 1643, Res. Br., Canada Dep. Agric., Ottawa, ON. [https://web.archive.org/web/20160316180310/http://esc-sec.ca/aafcmonographs/insects_and_arachnids_part_1_eng.pdf Archived PDF]</ref>

Active capture of insects often involves using nets. [[Butterfly net|Aerial insect nets]] are used to collect flying insects. The bag of a butterfly net is generally constructed from a lightweight mesh to minimize damage to delicate [[butterfly]] wings. Sweep nets are more rugged, and used to collect insects from grass and brush. A sweep net is swept back and forth through vegetation quickly turning the opening from side to side and following a shallow figure eight pattern. The collector walks forward while sweeping, and the net is moved through plants and grasses with force. Sweeping continues for some distance and then the net is flipped over, with the bag hanging over the rim, trapping the insects until they can be removed. Other types of nets used for collecting insects include [[beating net]]s and [[aquatic net]]s.<ref name="Charles">[[Charles Valentine Riley]], 1892 ''Directions for collecting and preserving insects'' Bulletin (United States National Museum) no. 39, pt. F. Washington, Govt. Printing Office. [https://www.biodiversitylibrary.org/item/20176  Full text online here]</ref> [[Leaf litter sieve]]s are used by [[Coleoptera|coleopterists]] and to collect larvae.

Once collected, insects must be killed before they damage themselves trying to escape. [[Killing jar]]s are used on hard-bodied insects.  Soft-bodied insects, such as those in the [[larvae|larval]] stage, are generally [[Fixation (histology)|fixed]] in a vial containing an [[ethanol]] and water solution.<ref name ="Hongfu, Zhu, 1949" >Hongfu, Zhu, 1949 ''How to know the immature insects; an illustrated key for identifying the orders and families of many of the immature insects with suggestions for collecting, rearing and studying them, by H. F. Chu.'' Pictured key nature series Dubuque, Iowa, W. C. Brown Co.[https://www.biodiversitylibrary.org/item/29017 Full text online here]
</ref>

==Storage and curation==
[[File:MuseumfürNaturkundeInsectPreparation (2).jpg|thumb|Equipment for preparation]]
[[File:Proper insect pinning and label order.jpg|thumb|Insect pinning label order diagram]]

There are several different preservation methods that are used; some of which include: dried preservation (pinning), liquid preservation, or slide mounts. Another (now mostly historical) approach is [[caterpillar inflation]], where the innards were removed and the skin dried.<ref name=gibb>{{cite book |last1=Gibb |first1=Timothy J|last2=Oseto |first2=Christian  |date=2006 |title=Arthropod Collection and Identification: Laboratory and Field Techniques |publisher=[[Academic Press]] |page=67|isbn=0123695457 }}</ref> Pinning is by far the most common form of insect preservation.<ref name="Manoj K. 2022"/>

It is better to pin an insect that has died recently enough that it has not dried yet, because it allows the thoracic muscles to adhere to the pin. Previously dried specimens must have glue applied to the pin location to avoid spinning. The large majority of the time insects are pinned vertically through their mesothorax and slightly off-center to the right of the mid-line.<ref>{{cite web |last1=Department of Entomology |title=How to Make an Awesome Insect Collection: Purdue: entomology: insect: collect: supplies: specimen: mounting: identifying: displaying: preserve: labels |url=https://extension.entm.purdue.edu/401Book/default.php?page=pinning_large_insects |website=Purdue |access-date=December 27, 2019}}</ref> The pin should sit with 1/4 of the pin above the insect as to allow enough room for labels to be readable underneath.

When pinning insects with wings, it is important to display them properly: Lepidoptera wings should always be spread. When drying insects with wings such as butterflies, setting paper is used to position the wings.

[[Orthoptera|Orthopteroids]] often have their left wings spread. In scientific collections, the insect's wings, legs, and antenna are tucked underneath it to conserve space.

When point-mounting small insects the insect is glued to a small piece of non acidic, triangle paper.  When drying an insect the relaxed insect is spread out accordingly using pins on a foam block where it can dry and retain its positioning.

When labeling insects the labels are presented in this order top down: Locality, additional locality/voucher label/accession numbers, insect identification.<ref name="Uys & Urban">V.M. Uys & R.P. Urban (Eds.): "How to Collect and Preserve Insects and Arachnids". Pretoria 2006. 112 p. {{ISBN|1-86849-311-3}}</ref>

== Insect pins ==
{{main|Insect pins}}
[[File:Insect Safari - beetle 36.jpg|thumb|Part of a beetle collection. The insects are fixed in place by entomological pins which allow handling and which also pierce the data label]]
[[File:StagedSyrphidae.jpg|thumb|A hoverfly double-mounted with a minuten pin and a size 3 pin]]

'''Insect pins''' are used by [[entomologist]]s for mounting insect specimens.<ref name="Manoj K. 2022"/>

As standard, they are {{convert|38|mm|inch}} long and come in sizes from 000 (the smallest diameter), through 00, 0, and 1, to 8 (the largest diameter).{{sfn|Gibb|Oseto|2010|p=53}}{{sfn|Dhooria|2009a|p=114}}{{sfn|Banks|1909|p=53}}
The most generally useful size in entomology is size 2, which is {{convert|0.46|mm|inch}} in diameter, with sizes 1 and 3 being the next most useful.{{sfn|Gibb|Oseto|2010|p=53}}{{sfn|Dhooria|2009a|p=114}}

They were once commonly made from brass or silver, but these would corrode from contact with insect bodies and are no longer commonly used.{{sfn|Gibb|Oseto|2010|p=53}}
Instead they are nickel-plated brass, yielding "white" or "black" enamelling, or even made from stainless steel.{{sfn|Dhooria|2009a|p=114}}
Similarly, the smallest sizes from 000 to 1 used to be impractical for mounting until plastic and polyethylene became commonly used for pinning bases.{{sfn|Gibb|Oseto|2010|p=53}}

There are also ''micropins'', which are {{convert|10|-|15|mm|inch}} long.{{sfn|Dhooria|2009a|p=114}}
''minutens'' are headless micropins that are generally only made of stainless steel, used for double-mounting, where the insect is mounted on the minuten, which is pinned to a small block of soft material, which is in turn mounted on a standard, larger, insect pin.{{sfn|Gibb|Oseto|2010|pp=55&ndash;56}}{{sfn|Dhooria|2009b|p=146}}

===Pinning of entomological specimens===
[[File:US Navy 100506-N-7498L-152 Sailors assigned to the entomology division of Navy Environmental and Preventive Medicine (NEPMU) 6 at Joint Base Pearl Harbor-Hickam collect various insects for study.jpg|thumb|Directly-pinned Diptera. Though most of these specimens are at the correct height, some have been pinned incorrectly by placing the pin on the centre line, damaging characters on both sides of the thorax.]]
[[File:Setting boards.JPG|thumb|Setting boards]]

*'''Entomological pins'''. Continental pins, so called for historical reasons, are used internationally by museums and collectors. They are made of stainless steel for preference, especially for very long-term storage of specimens, but blackened steel also is used. The pins have round plastic or solid metal heads. Continental pins are of a standard length (40mm), but they are available in thicknesses numbered 000 (the thinnest), 00, 0, 1, 2, 3, 4, 5, and 6 (the thickest). This standard pin length is sufficient to accommodate an adequate number of data labels and to permit convenient handling with suitably curved [[forceps]] or tweezers, referred to as 'entomological forceps'.<ref>{{cite book |last1=Common |first1=I. F. B. |title=Moths of Australia |date=1990 |publisher=BRILL |isbn=978-90-04-09227-3 |page=473 |url=https://books.google.com/books?id=magzbmvdRvQC&pg=PA473 |access-date=14 June 2022 |language=en}}</ref>
As an exception to this standard, there also are pins of size 7, extra-long and very strong pins for very large beetles; they are 52mm long and thicker than size 6 pins. 
*'''Direct pinning.''' Direct pinning is the insertion of an entomological pin directly through the [[Thorax (insect anatomy)|thorax]] of a specimen. The insects are pinned vertically through the thorax with a suitably sized pin, but by convention they are ''not'' pinned on the midline, but to the right, so as to leave at least one side undamaged.<ref name="OregonGuide">{{cite web |last1=Rondon |first1=Sylvia |last2=Corp |first2=Mary |title=Pinning and Labeling Insects |url=https://extension.oregonstate.edu/sites/default/files/documents/9591/pinning-insects.pdf |website=oregonstate.edu |publisher=Oregon State University |access-date=14 June 2022}}</ref>
*'''Point'''. A point is a triangular piece of white card. Specially designed point punches permit the production of large numbers of points of standard sizes as required. To use a point, a pin is inserted through the broad base of the triangle. To mount the specimen, a tiny amount of glue is placed on the tip and applied to the right side of the insect's thorax.<ref name="OregonGuide"/> If appropriate the tip of the point may be bent at the necessary angle to hold the body of the specimen horizontal when the pin is vertical, with the long axis of the insect at right angles to the point.
[[File:Sciapus nervosus.jpg|thumb|Sciapus nervosus glued to a card point]]
[[File:InsectCollectionDiptera.jpg|thumb|Diptera mounted on card points]]
*'''Minuten pins'''. Insect pins without heads, 12mm long. They are used for double mounting (staging) very small insects. They also may be used profitably for staging insects of moderate size, where they have the advantage of being less damaging to the specimen. For best effect in that respect, the pin is inserted from below through the staging card, well into the thorax, but not all the way through. Alternatively the minuten pin can be inserted laterally into one side of the thorax, again preferably not all the way through.
*'''Carding'''. Insects (especially [[Coleoptera]] and [[Hemiptera]]) are glued to rectangular pieces of acid free card or [[Bristol board]] providing a stage. Typical sizes are 4.5 x 11&nbsp;mm;5 x 14&nbsp;mm;6 x 17&nbsp;mm;10 x 21&nbsp;mm;13 x 30&nbsp;mm. Printed lines allow uniform placement of the entomological pin. Though this is convenient, it is dubious practice at best, because it obscures features that might be necessary for taxonomic or morphological studies. In any case, at the very least the glue should be sufficiently conveniently soluble to be removed with solvents when necessary. With such considerations in mind, [[Canada balsam]] is about as good an adhesive as any. 
[[File:CardedHemiptera.jpg|thumb|A carded bug]]
*'''Staging'''. When specimens are mounted on a smaller support which in turn is supported on a normal full-sized entomological pin, this is called staging. For example a specimen might be mounted on a minuten pin, typically being pinned on its side (lateral pinning) or upright (direct pinning) with the minuten pin driven into a stage, a strip of suitable material such as dried plant [[pith]] or plastic foam supported in a horizontal position on the main entomological pin; as a rule a number 3 pin is convenient. Other forms of stage include card mounts and point mounts. 
:The stage usually is positioned at such a distance up the vertical stage-pin, as to put the specimen at the same height as a directly pinned insect; this normally allows room for labels beneath and to allow handling of the specimen without damage. 
:If insects are side-pinned by pins that pass right through the specimens, then the minuten should be at such an angle that different features are damaged on the opposite sides of the thorax. Competent staging protects small specimens and displays most features conveniently. The stage-pin then is easy to manipulate when moving the specimen and the stage absorbs vibrations.

==In popular culture==
''[[Pokémon]]'' creator [[Satoshi Tajiri]]'s childhood hobby of insect collecting is the inspiration behind the popular video game series.<ref>[https://www.inshorts.com/news/pokemon-inspired-from-creators-bug-collection-hobby-1468331005757 Pokémon inspired from creator’s bug collection hobby], inshorts</ref>

A beetle collection becomes a source of fascination for a mentally disturbed woman in Chapter XI of MacKinlay Kantor's Pulitzer Prize-winning novel ''[[Andersonville (novel)|Andersonville]]'' (1955).

==See also==
*[[Identification key]]
*[[Killing jar]]
*[[Timeline of entomology]]
{{Clear}}

== References ==
{{More footnotes needed|date=April 2009}}
{{reflist}}

===Works cited===
{{refbegin|2}}
* {{cite magazine |last=Banks |first=Nathan |title=Directions for Collecting and Preserving Insects |magazine=Bulletin |publisher=Smithsonian Institution, United States National Museum |year=1909 |issue=67}}
* {{cite book |last1=Denham |first1=Carolyn |last2=Field |first2=Roderick |title=Merchant & Mills Sewing Book |publisher=Collins & Brown |year=2014 |isbn=9781910231012}}
* {{cite encyclopaedia |last=Dhooria |first=Manjit S. |encyclopaedia=Ane's Encyclopedic Dictionary of General & Applied Entomology |publisher=Springer Science + Business Media |year=2009a |isbn=9781402086441 |article=Insect pins}}
* {{cite encyclopaedia |last=Dhooria |first=Manjit S. |encyclopaedia=Ane's Encyclopedic Dictionary of General & Applied Entomology |publisher=Springer Science + Business Media |year=2009b |isbn=9781402086441 |article=Minuten pins}}
* {{cite book |last1=Gibb |first1=Timothy J. |last2=Oseto |first2=Christian |title=Arthropod Collection and Identification: Laboratory and Field Techniques |publisher=Academic Press |year=2010 |isbn=9780080919256}}
{{refend}}

===Further reading===
Picture guide series for college students. Out of date, but very useful for beginners:

*Harry Edwin Jaques, 1941 ''How to know the insects; an illustrated key to the more common families of insects, with suggestions for collecting, mounting and studying them''. His Pictured-key nature series Mt. Pleasant, Iowa, The author [https://www.biodiversitylibrary.org/item/29869#page/3/mode/1up Full text online here] Excellent college level guide
*Hongfu, Zhu, 1949 ''How to know the immature insects; an illustrated key for identifying the orders and families of many of the immature insects with suggestions for collecting, rearing and studying them, by H. F. Chu.'' Pictured key nature series Dubuque, Iowa, W. C. Brown Co.[https://www.biodiversitylibrary.org/item/29017 Full text online here]

== External links ==
{{Commons category|Insect collecting}}
{{Commons|Insect Collections Methodology}}
*[http://www.stevemcwilliam.co.uk/entomol/invcaptr.htm#Invertebrate%20Capture%20Techniques%20Header Capture methods and techniques] Intermediate level
* [https://web.archive.org/web/20070322125245/http://www.ars.usda.gov/Main/site_main.htm?docid=10141&page=1 Collecting and Preserving Insects and Mites: Tools and Techniques]; [http://www.ars.usda.gov/SP2UserFiles/ad_hoc/12754100CollectingandPreservingInsectsandMites/collpres.pdf PDF] Comprehensive, detailed download. Advanced level.
*[https://www.biodiversitylibrary.org/item/29841#page/3/mode/1up How to make an insect collection; containing suggestions and hints designed to aid the beginning and less advanced collector (Wards Natural Science Establishment 1945)]

{{Hunting topics}}
{{Trapping}}

{{DEFAULTSORT:Insect Collecting}}
[[Category:Insect-related occupations or hobbies|Collecting]]
[[Category:Collecting]]
[[Category:Natural history]]
[[Category:Cultural history]]