Editing Intensity modulation

In [[optical communications]], '''intensity modulation''' ('''IM''') is a form of [[modulation]] in which the optical [[Power (physics)|power]] output of a source is varied in accordance with some characteristic of the modulating [[Signal (information theory)|signal]]. The envelope of the modulated optical signal is an analog of the modulating signal in the sense that the instantaneous power of the envelope is an analog of the characteristic of interest in the modulating signal. 

The recovery of the modulating signal is typically achieved by direct detection, not [[Heterodyne|heterodyning]]. However, [[optical heterodyne detection]] is possible and has been actively studied since 1979. [[Bell Laboratories]] had a working, but impractical, system in 1969.<ref>T. Okoshi, ''Coherent Optical Fiber Communications'', pages 2-3, Springer, 1988 {{ISBN|9027726779}}.</ref> Heterodyne and [[homodyne]] systems are of interest because they are expected to produce an increase in sensitivity of up to {{nowrap|20 dB}}<ref>T. G. Hodgkinson, D. W. Smith, R. Wyatt, D. J. Malyon, "Coherent optical fibre transmission systems", in Bishnu P Pal (ed), ''Fundamentals Of Fibre Optics In Telecommunication And Sensor Systems'' ,page 470, Bohem Press, 1992 {{ISBN|8122404693}}.</ref> allowing longer hops between islands for instance. Such systems also have the important advantage of very narrow channel spacing in optical [[frequency-division multiplexing]] (OFDM) systems.<ref>Chinlon Lin, "Opto-electronics and the information age: a perspective", in Bishnu P Pal (ed), ''Fundamentals Of Fibre Optics In Telecommunication And Sensor Systems'' ,page 20, Bohem Press, 1992 {{ISBN|8122404693}}.</ref> OFDM is a step beyond [[wavelength-division multiplexing]] (WDM). Normal WDM using direct detection does not achieve anything like the close channel spacing of [[radio frequency]] FDM.<ref>Ananth Selvarajan, Subrat Kar, T. Srinivas. ''Optical Fiber Communication: Principles and Systems'', page 129, Tata McGraw-Hill Education, 2003 {{ISBN|0070445567}}.</ref>

== Intensity modulation with direct detection ==
Intensity Modulation / Direct Detection (IM/DD) is a scheme is simple and cost-effective in fiber optic communication, making it a suitable for various optical communication applications. It involves modulating the optical power of the carrier signal to represent the transmitted data. This modulation can be achieved using techniques, such as [[On–off keying|on-off keying]] (OOK). The intensity-modulated optical signal is generated by modulating the amplitude or the current of the light source, typically a laser diode with one or two cavity designs such as [[Fabry-Perot]] or [[Distributed-feedback laser|distributed feedback]] (DFB).<ref name=":0">{{Cite journal |last1=Cox |first1=C. |last2=Ackerman |first2=E. |last3=Helkey |first3=R. |last4=Betts |first4=G.E. |date=August 1997 |title=Techniques and Performance of Intensity-Modulation Direct-Detection Analog Optical Links |url=https://ieeexplore.ieee.org/document/618439 |journal=IEEE Transactions on Microwave Theory and Techniques |volume=45 |issue=8 |pages=1375–1383 |doi=10.1109/22.618439 |issn=0018-9480|url-access=subscription }}</ref>

At the receiver end, direct detection (DD) is used to recover the modulated signal. The modulated optical signal is detected by a [[photodetector]] (most commonly [[PIN photodiode|PIN]] or APD [[photodiode]]), which converts the optical power variations into corresponding electrical current or voltage variations. The output of the photodetector is then processed and decoded to retrieve the original information.<ref name=":0" />

==See also==
*[[Photoacoustic Doppler effect]]

==References==
{{reflist}}
{{FS1037C MS188}}

==Further reading==
*William Shieh, Ivan Djordjevic, ''OFDM for Optical Communications'', Academic Press, 2009 {{ISBN|0-12-374879-8}}.

{{Optical telecommunication}}
{{Telecommunications}}{{Optics-stub}}
[[Category:Optical communications]]