Editing Polyoxymethylene

{{Short description|Engineering thermoplastic polymer}}
{{Chembox
| Verifiedfields = changed
| Watchedfields  = changed
| verifiedrevid  = 464210041
| ImageFile      = Polyoxymethylene.svg
| ImageSize      = 120px
| ImageAlt       = Full structural formula of the repeating unit
| ImageFile1     = Polyoxymethylene 3D spacefill.png
| ImageSize1     = 240
| ImageAlt1      = Space-filling model of a polyoxymethylene chain
| IUPACName      = Polyoxymethylene
| PIN            = 
| OtherNames     = Poly(oxymethylene) glycol; polymethylene glycol
| Section1       = {{Chembox Identifiers
| CASNo_Ref = {{cascite|correct|CAS}}
| CASNo = 9002-81-7
| UNII_Ref = {{fdacite|correct|FDA}}
| UNII = QHG55SH7ER
| PubChem =
| ChemSpiderID_Ref = {{chemspidercite|changed|chemspider}}
| ChemSpiderID = None
| SMILES = }}

<!-- Properties -->| Section2       = {{Chembox Properties
| Formula = (CH<sub>2</sub>O)<sub>n</sub>
| MolarMass = Variable
| Appearance = White solid (but can be dyed)
| Density = 1.41–1.42{{nbsp}}g/cm<sup>3</sup>{{r|mw}}
| MeltingPt = {{convert|165|C|F}}{{r|xometry-2021}}
| BoilingPt =
| Solubility = 
| MagSus = −9.36×10<sup>−6</sup> (SI, at 22{{nbsp}}°C) <ref>{{cite journal|last1=Wapler|first1=M. C.|last2=Leupold|first2=J.|last3=Dragonu|first3=I.|last4=von Elverfeldt|first4=D.|last5=Zaitsev|first5=M.|last6=Wallrabe|first6=U.|title=Magnetic properties of materials for MR engineering, micro-MR and beyond|journal=JMR|date=2014|volume=242|pages=233–242|doi=10.1016/j.jmr.2014.02.005|arxiv=1403.4760|bibcode=2014JMagR.242..233W|pmid=24705364|s2cid=11545416}}</ref>
| ElectricalResistivity = 14×10<sup>15</sup> Ω⋅cm<ref name="xometry-2021" />
}}

<!-- Thermochemistry -->| Section3       = {{Chembox Thermochemistry
| DeltaGf        = 
| DeltaHc        = 
| DeltaHf        = 
| Entropy        = 
| HeatCapacity   = 1500 J/kg·K{{r|xometry-2021}}
  }}

<!-- Hazards -->| Section4       = {{Chembox Hazards
| MainHazards =
| FlashPt =
| AutoignitionPt = }}
}}
[[File:Keck clips.jpg|thumb|[[Ground glass joint#Joint clips|Keck clips]] made of polyoxymethylene]]

'''Polyoxymethylene''' ('''POM'''), also known as '''acetal''',<ref>{{cite web|url=http://www.matweb.com/search/QuickText.aspx?SearchText=acetal|title= MatWeb:acetal}}</ref> '''polyacetal''', and '''polyformaldehyde''', is an engineering [[thermoplastic]] used in precision parts requiring high [[stiffness]], low [[friction]], and excellent dimensional stability. Short-chained POM (chain length between 8 and 100 repeating units) is also better known as [[paraformaldehyde]] (PFA). As with many other synthetic [[polymer]]s, polyoxymethylenes are produced by different chemical firms with slightly different formulas and sold as Delrin, Kocetal, Ultraform, Celcon, Ramtal, Duracon, Kepital, Polypenco, Tenac and Hostaform.

POM is characterized by its high strength, hardness and rigidity to −40&nbsp;°C. POM is intrinsically opaque white because of its high crystalline composition but can be produced in a variety of colors.<ref name="mw">{{ cite web|title=Colored Delrin|url=https://www.alro.com/divplastics/plasticsproduct_delrin150.aspx|access-date=12 March 2021}}</ref> POM has a density of 1.410–1.420{{nbsp}}g/cm<sup>3</sup>.<ref>{{cite web|url=http://tools.ticona.com/tools/mcbasei/product-tools.php?sPolymer=POM&sProduct=CELCON|title=Ticona MSDS for Hostaform|url-status=dead|archive-url=https://web.archive.org/web/20110512174003/http://tools.ticona.com/tools/mcbasei/product-tools.php?sPolymer=POM&sProduct=CELCON|archive-date=2011-05-12}}</ref>

Typical applications for [[injection molding|injection-molded]] POM include high-performance engineering components such as small gear wheels, [[Glasses|eyeglass frames]], [[ball bearing]]s, [[ski binding]]s, fasteners, [[gun]] parts, knife handles, and lock systems. The material is widely used in the automotive and [[consumer electronics]] industry. POM's electrical resistivity is 14×10<sup>15</sup> Ω⋅cm making it a dielectric with a 19.5[[Dielectric strength|MV/m]] breakdown voltage.<ref name="xometry-2021">{{cite web|title=Data Sheet: POM (Delrin, Acetal)|website=xometry.eu|date=2021|url=https://xometry.eu/wp-content/uploads/2021/03/POM.pdf|access-date=June 19, 2022}}</ref><ref>[https://www.curbellplastics.com/Research-Solutions/Plastic-Material-Properties/Acetal Acetal (Polyoxymethylene)]</ref>

==Development==
Polyoxymethylene was discovered by [[Hermann Staudinger]], a German chemist who received the 1953 [[Nobel Prize in Chemistry]].<ref name="Nobel">{{cite web|title=The Nobel Prize in Chemistry 1953|url=https://www.nobelprize.org/nobel_prizes/chemistry/laureates/1953/|website=NobelPrize.org|access-date=8 March 2016}}</ref> He had studied the [[polymerization]] and structure of POM in the 1920s while researching [[macromolecules]], which he characterized as polymers. Due to problems with [[thermostability]], POM was not commercialized at that time.<ref>{{Cite web |last=Kincaid |first=Courtney |date=2018-07-06 |title=Acetal - Polyoxymethylene (POM) - Thermoplastic |url=https://www.polymershapes.com/acetal/ |access-date=2024-05-13 |website=Polymershapes |language=en-US}}</ref>

Circa 1952, research chemists at [[DuPont]] synthesized a version of POM,<ref name="KennedyWatkins2012">{{cite book|author1=Joseph P. Kennedy|author2=Wayne H. Watkins|title=How to Invent and Protect Your Invention: A Guide to Patents for Scientists and Engineers|url=https://books.google.com/books?id=SxxXvUv3jH8C&pg=PT194|date=31 July 2012|publisher=John Wiley & Sons|isbn=978-1-118-41009-7|pages=194–}}</ref> and in 1956 the company filed for patent protection of the [[homopolymer]],<ref name="BPF-timeline">{{cite web|title=A History of Plastics|url=http://www.bpf.co.uk/plastipedia/plastics_history/default.aspx|website=British Plastics Federation|access-date=8 March 2016}}</ref> forgetting to mention in the patent the term [[copolymer]], opening thus the road to competitors. DuPont credits R. N. MacDonald as the inventor of high-molecular-weight POM.<ref>[http://uk.news.dupont.com/site/contenu.asp?idtri=624&idcontenu=56221 News & Media Relations Home - DuPont EMEA<!-- Bot generated title -->]{{Dead link|date=November 2023 |bot=InternetArchiveBot |fix-attempted=yes }}</ref> Patents by MacDonald and coworkers describe the preparation of high-molecular-weight [[hemiacetal]]-terminated (~O−CH<sub>2</sub>OH) POM,<ref>{{cite patent|country=US|number=2768994|pubdate=1956-10-30|title=Polyoxymethylenes|assign1=[[DuPont|E. I. Du Pont de Nemours and Co.]]|inventor1-last=Macdonald|inventor1-first=Robert Neal}}</ref> but these lack sufficient thermal stability to be  commercially viable. The inventor of a heat-stable (and therefore useful) POM homopolymer was Stephen Dal Nogare,<ref>{{Cite patent|country=US|number=2998409|pubdate=1961-08-29|title=Polyoxymethylene carboxylates of improved thermal stability|assign1=[[DuPont|E. I. Du Pont de Nemours and Co.]]|inventor1-last=Nogare|inventor1-first=Stephen Dal|inventor2-last=Punderson|inventor2-first=John Oliver}}</ref> who discovered that reacting the hemiacetal ends with [[acetic anhydride]] converts the readily depolymerizable hemiacetal into a thermally stable, melt-processable plastic.

In 1960, DuPont completed construction of a plant to produce its own version of acetal resin, named ''Delrin'', at [[Parkersburg, West Virginia|Parkersburg, United States]].<ref name="PainterColeman2008">{{cite book|author1=Paul C. Painter|author2=Michael M. Coleman|title=Essentials of Polymer Science and Engineering|url=https://books.google.com/books?id=CL7O_hH0aw4C&pg=PA313|year=2008|publisher=DEStech Publications, Inc|isbn=978-1-932078-75-6|pages=313–}}</ref> Also in 1960, [[Celanese]] completed its own research. Shortly thereafter, in  a limited partnership with the [[Frankfurt]] firm [[Hoechst AG]], a factory was built in [[Kelsterbach]], [[Hessen]]; from there, ''Celcon'' was produced starting in 1962,<ref name="Ibeh2011">{{cite book|author=Christopher C. Ibeh|title=Thermoplastic Materials: Properties, Manufacturing Methods, and Applications|url=https://books.google.com/books?id=qwfMBQAAQBAJ&pg=PA473|date=25 April 2011|publisher=CRC Press|isbn=978-1-4200-9384-1|pages=473–}}</ref> with ''Hostaform'' joining it a year later. Both remain in production under the auspices of [[Celanese]] and are sold as parts of a product group now called 'Hostaform/Celcon POM''.

== Production ==
{{More citations needed|date=March 2016}}

Different manufacturing processes are used to produce the homopolymer and copolymer versions of POM.

=== Homopolymer ===
To make polyoxymethylene [[homopolymer]], [[anhydrous]] [[formaldehyde]] must be generated. The principal method is by reaction of the aqueous formaldehyde with an alcohol to create a [[Hemiacetal|hemiformal]], dehydration of the hemiformal/water mixture (either by [[Extraction (chemistry)|extraction]] or [[vacuum distillation]]) and release of the formaldehyde by heating the hemiformal. The formaldehyde is then polymerized by [[Asymmetric counteranion directed catalysis|anionic catalysis]], and the resulting polymer stabilized by reaction with [[acetic anhydride]]. Due to the manufacturing process, large-diameter cross-sections may have pronounced centerline porosity.<ref>{{cite web |title=Acetal Products Comparison: Acetal vs. Delrin |url=http://lionep.com/uploads/files/Acetal-vs-Delrin.pdf |publisher=Lion Engineering Plastics |access-date=2016-10-01}}</ref>  A typical example is DuPont's Delrin.

===Copolymer ===
The polyoxymethylene [[copolymer]] replaces about 1–1.5% of the −CH<sub>2</sub>O− groups with −CH<sub>2</sub>CH<sub>2</sub>O−.<ref>{{cite web |title=How to Maximise the Property Advantages of DuPont Delrin Acetal Homopolymer over Acetal Copolymer |url=http://www.dupont.com/content/dam/dupont/products-and-services/plastics-polymers-and-resins/thermoplastics/documents/Delrin/DuPont%20Delrin(R)%20vs%20Acetal%20Copolymer%20White%20Paper.pdf |publisher=DuPont |year=2013 |access-date=2016-10-01 |archive-date=2016-05-19 |archive-url=https://web.archive.org/web/20160519081249/http://www.dupont.com/content/dam/dupont/products-and-services/plastics-polymers-and-resins/thermoplastics/documents/Delrin/DuPont%20Delrin(R)%20vs%20Acetal%20Copolymer%20White%20Paper.pdf |url-status=dead }}</ref>

To make polyoxymethylene [[copolymer]], formaldehyde is generally converted to [[trioxane]] (specifically [[1,3,5-Trioxane|1,3,5-trioxane]], also known as trioxin).<ref>{{Cite patent|number=US5344911A|title=Process for producing polyoxymethylene copolymer having reduced amount of unstable terminal groups|gdate=1994-09-06|invent1=Yamamoto|invent2=Maeda|invent3=Kamiya|invent4=Murao|inventor1-first=Kaoru|inventor2-first=Nagayoshi|inventor3-first=Makoto|inventor4-first=Toshiro|url=https://patents.google.com/patent/US5344911A/en}}</ref> This is done by [[acid catalysis]] (either [[sulfuric acid]] or acidic [[ion-exchange resins]]) followed by purification of the trioxane by distillation and/or extraction to remove water and other active hydrogen-containing impurities. Typical copolymers are Hostaform from [[Celanese]] and Ultraform from [[BASF]].

The [[co-monomer]] is typically [[dioxolane]], but [[ethylene oxide]] can also be used. Dioxolane is formed by reaction of [[ethylene glycol]] with aqueous formaldehyde over an acid catalyst. Other diols can also be used.

Trioxane and dioxolane are polymerized using an acid catalyst, often [[boron trifluoride etherate]], BF<sub>3</sub>OEt<sub>2</sub>. The polymerization can take place in a [[non-polar solvent]] (in which case the polymer forms as a slurry) or in neat trioxane (e.g. in an extruder). After polymerization, the acidic catalyst must be deactivated and the polymer stabilized by melt or solution hydrolysis to remove unstable end groups.

Stable polymer is melt-compounded, adding thermal and oxidative stabilizers and optionally lubricants and miscellaneous fillers.

=== Fabrication ===
POM is supplied in a granulated form and can be formed into the desired shape by applying heat and pressure.<ref>{{Cite web |date=September 18, 2024 |title=Polyoxymethylene |url=https://www.atamanchemicals.com/polyoxymethylene_u28648/ |website=Ataman Chemicals}}</ref> The two most common forming methods employed are [[injection molding]] and [[extrusion]]. [[Rotational molding]] and [[blow molding]] are also possible.{{citation needed|date=May 2024}}

Typical applications for injection-molded POM include high-performance engineering components (e.g. gear wheels, ski bindings, [[yoyo]]s, fasteners, lock systems). The material is widely used in the automotive and consumer electronics industry. There are special grades that offer higher mechanical toughness, stiffness or low-friction/wear properties.

POM is commonly extruded as continuous lengths of round or rectangular section. These sections can be cut to length and sold as bar or sheet stock for machining.

== Typical mechanical properties ==
POM is a hard plastic, that cannot be glued, but can be joined to POM by melting. Melted POM does not adhere to steel tools used to shape it.<ref>{{Cite web |title=POM standard values |url=https://heutecomp.de/wp-content/uploads/2015/10/POM_standard_values.pdf |access-date=November 3, 2023 |website=POM_standard_values.pdf |archive-date=November 3, 2023 |archive-url=https://web.archive.org/web/20231103223606/https://heutecomp.de/wp-content/uploads/2015/10/POM_standard_values.pdf |url-status=dead }}</ref><ref name="General Properties of M90-44">{{Cite web |title=General Properties of M90-44 |url=https://www.polyplastics.com/Gidb/GradeInfoDownloadAction.do?gradeId=1771&fileNo=1&langId=1&_LOCALE=ENGLISH |access-date=November 3, 2023 |website=DURACON® POM Grade Catalog M90-44}}</ref>
{| class="wikitable"
|+
|Density
|1.41
|kg/dm<sup>3</sup>
|-
|Melting point
|165
|°C
|-
|Specific thermal capacity
|1500
|J/kg/K
|-
|Specific thermal conductivy
|0.31 to 0.37
|W/m/K
|-
|Coefficient of thermal expansion
|120<ref name="General Properties of M90-44"/>
|ppm/K
|}

POM is a relatively strong plastic, nearly as strong as epoxy, or aluminum, but a bit more flexible:
{| class="wikitable"
|+
!Property
!value
!units
|-
|Tensile yield stress
|62
|MPa
|-
|Tensile modulus
|2700
|MPa
|-
|Elongation at yield
|2.5
|%
|-
|Tensile breaking stress
|67
|MPa
|-
|Elongation at break
|35
|%
|-
|Impact strength
|80
|kJ/m<sup>2</sup>
|}
 
POM is wear-resistant:
{| class="wikitable"
|+
!Property
!conditions
!value
!units
|-
|Coefficient of friction against steel
|0.3&nbsp;m/s, 0.49 MPa
|0.31
|
|-
|Coefficient of friction against steel
|0.3&nbsp;m/s, 0.98 MPa
|0.37
|
|-
|Specific wear against steel
|0.49 MPa
|0.65
|mm<sup>3</sup>/N/km
|-
|Specific wear against steel
|0.98 MPa
|0.30
|mm<sup>3</sup>/N/km
|-
|Coefficient of friction against POM
|0.15&nbsp;m/s, 0.06 MPa
|0.37
|
|}

== Availability and price ==
POM materials can have trademarked producer-specific names, for example "Delrin".

Prices for large quantities, in October 2023, in US$/kg:<ref>{{Cite web |title=Polyoxymethylene (POM) price index |url=https://businessanalytiq.com/procurementanalytics/index/polyoxymethylene-pom-price-index/ |access-date=November 3, 2023 |website=BusinessAnalytIQ|date=7 October 2020 }}</ref>

*   USA : 3.26, Europe 2.81, China 2.58, SEA 2.30, Middle East 1.68 .

Prices and availability retail / small wholesale :

*   available in many colors, e.g. black, white, but not transparent .
*   available as plates <ref>{{Cite web |title=POM-C staf wit Ø 100mm |url=https://richkunststoffen.nl/product/pom-c-staf-naturel-100mm/ |access-date=November 3, 2023 |website=Rich Kunststoffen}}</ref>[ref], up to 3 meter by 1.25 meter, in thicknesses from 0.5mm to 130mm .
*   available as round bars [ref], from diameter 5mm to 200mm.

Retail price November 2023 in the Netherlands : from 19  to 27 euro/dm<sup>3</sup>

== Advantages and disadvantages ==
POM is a strong and hard plastic, about as strong as plastics can be, and therefore competes with e.g. [[Epoxy|epoxy resins]] and [[polycarbonate]]s.

The price of POM is about the same as that of epoxy.

There are two main differences between POM and epoxy resins:

* epoxy is a two-component resin that can be cast, and adheres to everything it touches,

while POM can be cast when melted and adheres to practically nothing.

* epoxy is usable up to 180&nbsp;°C. POM can be used long-time up to 80&nbsp;°C, short-time up to 100&nbsp;°C.

Epoxy resins are often used with [[glass fiber]] reinforcement, but for POM that is not an option because it does not adhere to the glass fibres.

Epoxy resins needs time to cure, while POM has fully matured as soon as it has cooled down.

POM has very little shrinkage: from 165&nbsp;°C to 20&nbsp;°C it shrinks by just 0.17%.

== Machining ==
When supplied as extruded bar or sheet, POM may be machined using traditional methods such as turning, milling, drilling etc. These techniques are best employed where production economics do not merit the expense of melt processing. The material is free-cutting, but does require sharp tools with a high clearance angle. The use of soluble cutting lubricant is not necessary, but is recommended.

POM sheets can be cut cleanly and accurately using an infrared laser, such as in a CO<sub>2</sub> [[laser cutter]].

Because the material lacks the rigidity of most metals, care should be taken to use light clamping forces and sufficient support for the work piece.

As can be the case with many polymers, machined POM can be dimensionally unstable, especially with parts that have large variations in wall thicknesses. It is recommended that such features be "designed-out" e.g. by adding fillets or strengthening ribs. Annealing of pre-machined parts before final finishing is an alternative. A rule of thumb is that in general, small components machined in POM suffer from less warping.

== Bonding ==
POM is typically very difficult to bond, with the copolymer typically responding worse to conventional adhesives than the homopolymer.<ref name="Ellsworth">{{cite web|title=Design Guide for Bonding Plastics|url=https://www.ellsworth.com/globalassets/literature-library/manufacturer/henkel-loctite/henkel-loctite-design-guide-plastic-bonding.pdf|access-date=22 February 2020}}</ref> Special processes and treatments have been developed to improve bonding. Typically these processes involve surface etching, [[flame treatment]], using a specific primer/adhesive system, or mechanical abrasion.

Typical etching processes involve [[chromic acid]] at elevated temperatures. DuPont uses a patented process for treating acetal homopolymer called satinizing that creates a surface roughness sufficient for micromechanical interlocking. There are also processes involving oxygen plasma and corona discharge.<ref>[http://www.plasticsportal.net/wa/plasticsEU~en_GB/portal/show/content/products/engineering_plastics/ultraform BASF Ultraform product information]</ref><ref>{{cite book| last = Snogren |first = R. C. |year = 1974 |title = Handbook of Surface Preparation |publisher = Palmerton Publishing Co. |location =New York}}</ref> In order to get a high bond strength without specialized tools, treatments, or roughening, one can use Loctite 401 prism adhesive combined with Loctite 770 prism primer to get bond strengths of ~1700psi.<ref name=Ellsworth />

Once the surface is prepared, a number of adhesives can be used for bonding. These include [[Epoxy|epoxies]], [[polyurethanes]], and [[cyanoacrylates]]. Epoxies have shown {{convert|150|-|1050|psi|abbr=on}}<ref name=Ellsworth /> shear strength. Cyanoacrylates are useful for bonding to metal, leather, rubber, cotton, and other plastics.

[[Solvent welding]] is typically unsuccessful on acetal polymers, due to the excellent solvent resistance of acetal.{{citation needed|date=May 2022}}

Thermal welding through various methods has been used successfully on both homopolymer and copolymer.<ref>{{cite web|title=Tamshell Engineering Corner|url=https://tamshell.com/engineering-corner|access-date=15 September 2017|archive-date=16 September 2017|archive-url=https://web.archive.org/web/20170916094908/https://tamshell.com/engineering-corner/|url-status=dead}}</ref>

== Usage ==
* [[File:A polyoxmethylene fountain pen.jpg|alt=A fountain pen with a polyoxymethylene body and cap|thumb|A fountain pen with a polyoxymethylene body and cap]]Mechanical [[gears]], sliding and guiding elements, housing parts, [[spring (device)|springs]], [[chains]], [[screws]], nuts, pop rivets, fan wheels, pump parts, valve bodies.
* Electrical engineering: [[Insulator (electricity)|insulators]], [[bobbin]]s, [[electrical connector|connectors]], parts for electronic devices such as [[televisions]], [[telephones]], etc.
* Vehicle: fuel sender unit, light/control stalk/combination switch (including shifter for light, turn signal), power windows, door lock systems, articulated shells.
* Model: model railway parts, such as trucks (bogies) and hand rails (handle bars). POM is tougher than [[Acrylonitrile butadiene styrene|ABS]], comes in bright translucent colors, and is not paintable.
* Hobbies: [[radio-controlled helicopter]] main gear, landing skid, [[yo-yo]]s, vaping drip tips, 3D printer wheels, [[K'Nex]],<ref>{{cite web |title=Ticona Polymer and Processing Expertise Helps Rodon Deliver Successes, Including K'NEX® Toys |url=http://www.celanese.com/engineered-materials/News-and-Media/2013/July/Ticona%20Polymer%20and%20Processing%20Expertise.aspx |website=celanese.com |publisher=Celanese Corporation |access-date=19 March 2016}}</ref> [[ball-jointed doll]]s,<ref>[https://dannychoo.com/archive/en/posts/the-smart-doll-body The Smart Doll Body]</ref> etc.
* Medical: insulin pen, metered dose inhalers (MDI).
* Food industry: [[Food and Drug Administration]] has approved some grades of POM for milk pumps, coffee spigots, filter housings and food conveyors.<ref>{{cite web |url=https://www.interstateplastics.com/acetal-sheets-rods.php |title=Acetal Plastic Sheet, Rod, Tube and Accessories |website=Interstate Plastics |access-date=September 1, 2015}}</ref>
* Furniture: [[Household hardware|hardware]], [[Lock (security device)|locks]], [[Handle (grip)|handles]], [[hinge]]s., rollers for sliding mechanisms of furnitures
* [[File:Dunlop Delrin 500.jpg|thumb|[[Dunlop Manufacturing|Dunlop]] "Delrin 500" guitar pick]]Construction: structural glass - pod holder for point
* Packaging: aerosol cans, vehicle tanks.
* Pens: used as the material for pen bodies and caps
* Sports: paintball accessories. It is often used for machined parts of paintball markers that do not require the strength of aluminium, such as handles and reciprocating bolts. POM is also used in airsoft guns to reduce piston noise.
* [[Longboarding]]: puck material for slide gloves help the rider touch the road and lean on their hand to slow down, stop, or perform tricks.
* Clothing: [[zippers]].
* Music: [[plectrum|picks]], [[Tin whistle|Irish flutes]], [[bagpipes]], [[practice chanter]]s, harpsichord plectra, instrument mouthpieces, tips of some drum sticks.<ref>{{cite web |last=Murphy |first=Joe |title=The Loud Buzzer |url=http://www.loudmouthpieces.com/ProductDetails.asp?ProductCode=LBUZ |publisher=unknown |access-date=2012-03-17 |archive-date=2013-10-04 |archive-url=https://web.archive.org/web/20131004232840/http://www.loudmouthpieces.com/ProductDetails.asp?ProductCode=LBUZ |url-status=dead }}</ref><ref>{{cite web |last=Barry |first=Kenneth |title=Saxscape Mouthpieces |url=http://www.saxscape.com}}</ref>
* Dining: fully automatic coffee brewers; knife handles (particularly folding knives).
* [[Horology]]: mechanical movement parts (e.g. Lemania 5100<ref>{{cite web|title=Chronography 4: Lemania 5100|date=19 October 2015|url=https://wornandwound.com/chronography-4-lemania-5100/}}</ref>), watch bracelets (e.g. [[International Watch Company|IWC]] [[Porsche Design]] 3701).
* Vapor/e-cigarette accessories: material used in the manufacturing of most "Drip Tips" (Mouthpiece).
* Tobacco products: The [[Société Bic|BIC Group]] uses Delrin for their lighters.<ref>{{Cite web |url=http://www.bic-feuerzeuge.de |title=BiC® Werbefeuerzeuge für Geschäftskunden |website=www.bic-feuerzeuge.de |language=de |access-date=2017-08-14}}</ref>
*Keyboard [[keycap]]s: Cherry uses POM for their G80 and G81 series keyboards.<ref>{{Cite web|url=https://www.numpad.co/abs-vs-pbt-vs-pom-keycap-plastic/|title=ABS vs PBT vs POM Keycap Plastic|date=2020-01-14|website=numpad|language=en-CA|access-date=2020-01-18|archive-date=2020-07-24|archive-url=https://web.archive.org/web/20200724230207/https://numpad.co/abs-vs-pbt-vs-pom-keycap-plastic/|url-status=dead}}</ref>

== Degradation ==
{{refimprove section|date=May 2025}}
[[File:Chlorine attack1.jpg|thumb|[[Chlorine]] attack of acetal-resin plumbing joint]]
Acetal resins are sensitive to [[acid]] [[hydrolysis]] and [[oxidation]] by agents such as [[mineral acids|mineral acid]] and [[chlorine]].<ref>{{Cite web |date=31 March 2020 |title=Acetal (POM) Chemical Compatibility Chart |url=https://www.industrialspec.com/images/files/acetal-pom-chemical-compatibility-chart-from-ism.pdf |website=Industrial Specialties Mfg.}}</ref> POM homopolymer is also susceptible to alkaline attack and is more susceptible to degradation in hot water. Thus low levels of chlorine in potable water supplies (1–3&nbsp;ppm) can be sufficient to cause [[environmental stress cracking]], a problem experienced in both the US and Europe in domestic and commercial water supply systems. Defective mouldings are most sensitive to cracking, but normal mouldings can succumb if the water is hot. Both POM homopolymer and copolymer are stabilized to mitigate these types of degradation.

In chemistry applications, although the polymer is often suitable for the majority of glassware work, it can succumb to catastrophic failure. An example of this would be using the polymer clips on hot areas of the glassware (such as a flask-to-column, column-to-head or head-to-condenser joint during distillation). As the polymer is sensitive to both chlorine and acid hydrolysis, it may perform very poorly when exposed to the reactive gases, particularly [[hydrogen chloride]] (HCl). Failures in this latter instance can occur with seemingly unimportant exposures from well sealed joints and do so without warning and rapidly (the component will split or fall apart). This can be a significant health hazard, as the glass may open or smash. Here, [[polytetrafluoroethylene|PTFE]] or a high-grade stainless steel may be a more appropriate choice.

In addition, POM can have undesirable characteristics when burned. The flame is not self-extinguishing, shows little to no smoke, and the blue flame can be almost invisible in ambient light. Burning also releases [[formaldehyde]] gas, which irritates nose, throat, and eye tissues.

== See also ==
* [[Dalziel Hammick]]
* [[Forensic engineering]]
* [[Forensic polymer engineering]]
* [[Paraformaldehyde]]
* [[Polymer degradation]]
* [[Resin]]

== References ==
{{Reflist}}

== External links ==
* {{cite journal |url= http://machinedesign.com/basics-design/acetal |title= Acetal |journal= [[Machine Design]] |date= November 15, 2002 |access-date=17 December 2019}} 
* {{cite web |url= http://www.matweb.com/reference/acetalpolymer.aspx |title= Acetal (POM) Engineering Property Data |work= MatWeb |access-date =17 December 2019}}
* {{cite web |url= http://www.ptonline.com/columns/how-do-you-like-your-acetal-homopolymer-or-copolymer |title= How Do You Like Your Acetal: Homopolymer or Copolymer? |work= Plastics Technology |author= Michael Sepe |date= September 2012 |access-date=17 December 2019}}
* {{cite web |url= https://www.energetic-plastics.com/info/polyacetalscomparison-i00032i1.html |title= Acetal Delrin Copolymer Homopolymer - What are the differences? |access-date =17 December 2019}}

{{Plastics}}

[[Category:DuPont products]]
[[Category:Plastics]]
[[Category:Polyethers]]
[[Category:Thermoplastics]]