Open main menu
Home
Random
Recent changes
Special pages
Community portal
Preferences
About Wikipedia
Disclaimers
Incubator escapee wiki
Search
User menu
Talk
Dark mode
Contributions
Create account
Log in
Editing
Railway turntable
Warning:
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
log in
or
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
not
fill this in!
{{Short description|Device for turning railway rolling stock}} {{Other uses|Turntable (disambiguation)}} {{more citations needed|date=July 2012}} [[File:Wagon turntable.jpg|thumb|right|Wagon turntable at the [[National Slate Museum]] in Wales on {{RailGauge|2ft|lk=on}} gauge track]] [[File:Rail turntable viewed from the CN Tower.jpg|thumb|upright=1|A ''turntable'' at the [[John Street Roundhouse]], now part of [[Roundhouse Park]] in [[Toronto]], [[Canada]], viewed from the [[CN Tower]] in September 2012.]] [[Image:Plaque tournante système Péchot.JPG|thumb|[[Trench railway]] turntable.]] A '''railway turntable''' or '''wheelhouse''' is a device for turning railway [[rolling stock]], usually [[locomotive]]s, to face a different direction.<ref name="Locomotive/Railway Turntables">{{cite web|url=http://www.macton.com/rail_equipment/locomotive-turntables.htm|title=Locomotive/Railway Turntables|publisher=Macton.com|access-date=2014-10-20|archive-url=https://web.archive.org/web/20170422152221/http://macton.com/rail_equipment/locomotive-turntables.htm|archive-date=2017-04-22|url-status=dead}}</ref><ref>{{Cite web |title=The Development of the Locomotive Turntable |url=https://journals.sagepub.com/doi/abs/10.1243/JILE_PROC_1937_027_015_02?journalCode=jila}}</ref> It is especially used in areas where economic considerations or a lack of sufficient space have served to weigh against the construction of a [[Wye (rail)|turnaround wye]]. Railways needed a way to turn [[steam locomotives]] around for return journeys, as their controls were often not configured for extended periods of running in reverse; also many locomotives had a lower top speed in reverse. Most diesel locomotives, however, can be operated in either direction, and are considered to have "front ends" and "rear ends" (often determined by reference to the location of the crew cab). When a diesel locomotive is operated as a single unit, the railway company often prefers, or requires, that it be run "front end" first. When operated as part of a multiple unit locomotive [[consist]], the locomotives can be arranged so that the consist can be operated "front end first" no matter which direction the consist is pointed. Turntables were also used to turn [[observation car]]s so that their windowed lounge ends faced toward the rear of the train.<ref>The Elements of Railroad Engineering, 5th Edition, 1937, William G. Raymond. Published by John Wiley and Sons, New York</ref> Some early turntables rapidly became too small for their purpose as longer locomotives were introduced. == History == [[File:1961 - Central RR Of New Jersey Roundtable and Locomomotive Yard.jpg|thumb|left|A turntable for the [[Central Railroad of New Jersey]].]] [[File:09 Warehouses etc at the end of the Tunnel towards Wapping, from Bury's Liverpool and Manchester Railway, 1831 - artfinder 267568.jpg|thumb|left|Turnplates at the [[Park Lane railway goods station|Park Lane goods station]] of the [[Liverpool and Manchester Railway]] in 1831]] Early [[wagonways]] were [[industrial railway]]s for transporting goods—initially bulky and heavy items, particularly mined stone, ores and coal—from one point to another, most often to a dockside to be loaded onto ships.<ref name=WelshAJR/> These early wagonways used a single point-to-point track, and when operators had to move a truck to another wagonway, they did so by hand. The lack of switching technology seriously limited the weight of any loaded wagon combination.<ref>{{cite book|title=Estates, Enterprise and Investment at the Dawn of the Industrial Revolution|author=David Oldroyd|publisher=Ashgate|date=13 Nov 2007|isbn=978-0754634553}}</ref> The first [[railway switch]]es were in fact wagon '''turnplates''' or [[Railroad Switch#Stub switch|sliding rails]]. Turnplates were initially made of two or four pieces of wood, circular in form, that replicated the track running through them. Their diameter matched that of the wagons used on any given wagonway, and they swung around a central pivot. Loaded wagons could be moved onto the turnplate, and rotating the turnplate 90 degrees allowed the loaded wagon to be moved to another piece of wagonway. Thus, wagon weight was limited only by the strength of the wood used in the turnplates or sliding rails. When iron and later steel replaced stone and wood, weight capacity rose again.<ref name=WelshAJR>{{cite book|title=The Rails and Sails of Welsh Slate|author=Alun John Richards|publisher=Llygad Gwalch Cyf|date=16 March 2011|isbn=978-1845241742}}</ref> However, the problems with turnplates and sliding rails were twofold. First, they were relatively small (often no more than {{convert|1|yard}} in length), which limited the wagon length that could be turned. Second, their switching capacity could only be accessed when the wagon was on top of them and still, which limited the total capacity of any wagonway. The [[railway switch]], which overcame both of these problems, was patented by [[Charles Fox (civil and railway engineer)|Charles Fox]] in 1832. As steam locomotives replaced horses as the preferred means of power, they became optimised to run in only one direction for operational ease and to provide some weather protection.<ref name=WelshAJR/> The resulting need to turn heavy locomotives required an engineering upgrade to the existing turnplate technology. Like earlier turnplates, most new turntables consisted of a circular pit in which a steel bridge rotated. The bridge was typically supported and balanced by the central pivot, to reduce the total load on the pivot and to allow easy turning. This was most often achieved by a steel rail running around the floor of the pit that supported the ends of the bridge when a locomotive entered or exited. The turntables had a positive locking mechanism to prevent undesired rotation and to align the bridge rails with the exit track. Rotation of the bridge could be accomplished manually (either by brute force or with a [[windlass]] system), popularly called an "Armstrong" turntable,<ref>{{cite book| url=https://books.google.com/books?id=CxAXPWlW_6UC&q=armstrong+turntable&pg=PA41| via=Google Books| page=41| quote=A lever was installed at both ends of the bridge and the table was moved by hand, a method popularly called "Armstrong."| title=The Model Railroader's Guide to Locomotive Servicing Terminals| first=Marty| last=McGuirk| publisher=Kalmbach Books| year=2002| location=Waukesha, WI| edition=1st| isbn=0-89024-414-6}}</ref><ref>{{cite web| url=https://www.american-rails.com/turntable.html| title=Turntable| website=American-Rails.com| accessdate=January 31, 2021}}</ref> by an external power source, or by the braking system of the locomotive itself, though this required a locomotive to be on the table for it to be rotated. The turntable bridge (the part of the turntable that included the tracks and that swivelled to turn the equipment) could span from {{convert|6|to|120|ft|m|1}}, depending on the railway's needs. Larger turntables were installed in maintenance facilities for longer locomotives, while short line and [[narrow gauge railway|narrow gauge]] railways typically used smaller turntables. Turntables as small as {{convert|6|ft|2}} in diameter have been installed in some industrial facilities where pieces of equipment are small enough to be pushed one at a time by humans or horsepower. Some turntables that were built in earlier days rapidly became unsuitable for the longer locomotives introduced. [[Roundhouse (venue)|The Roundhouse]] in London was built in 1846 to turn around steam locomotives on the line to Birmingham, but newer locomotives were too long within ten years—the building has been preserved and used for other purposes over the years.<ref>{{cite web | last=Rose | first=Steve | title=Steve Rose reports on the restoration of the Roundhouse |newspaper=The Guardian | date=29 May 2006 | url=https://www.theguardian.com/artanddesign/2006/may/29/architecture }}</ref> == Roundhouse == {{main|Railway roundhouse}} [[File:Turntable at OERM.jpg|thumb|left|A small turntable at the [[Southern California Railway Museum|Orange Empire Railway Museum]] in [[Perris, California]], US. This type of turntable with the central tower and supporting cables is called a "gallows turntable"]] [[File:Train roundhose 1909.jpg|thumb|A larger turntable with several exits, 1909]] In engine maintenance facilities, a turntable was usually surrounded, in part or in whole, by a building known as a roundhouse. It was more common for the roundhouse to only cover a portion of the land around a turntable, but there are fully circular roundhouses, such as these preserved roundhouses: * The roundhouse that serves as the basis for the [[Baltimore and Ohio Railroad Museum]] in [[Baltimore]], Maryland, US * [[The Roundhouse]] in [[London]], England, now an arts centre. * [[Junee Roundhouse Railway Museum]] {{clear}} == By country == [[File:Lännakatten Faringe 2015.webm|thumb|Function of a railway turntable on [[Upsala-Lenna Jernväg]] in [[Sweden]]]] === Hungary === [[Miskolc Tiszai railway station]] retains an active turntable as of December 2021.<ref>https://www.openstreetmap.org/#map=19/48.09409/20.79971 Openstreetmap, retrieved 2021-12-11</ref> === India === There was a turntable at the [[Talaguppa]] end of the [[Shimoga-Talaguppa railway]],<ref name="turnt">{{cite web|url=http://www.irfca.org/gallery/Trips/smet-tlgp/|title= A trip on the Shimoga Town - Talguppa MG railbus|work=Irfca.org|access-date=2008-02-21 |archive-url = https://web.archive.org/web/20071220234956/http://www.irfca.org/gallery/Trips/smet-tlgp/ <!-- Bot retrieved archive --> |archive-date = 2007-12-20}}</ref> and one at [[Howbagh]] Railway Station near [[Jabalpur]] on the Balaghat-Jabalpur Narrow Gauge Line.<ref name="turnt2">{{cite web|url=http://indiarailinfo.com/blog/post/1628251|title= Blog entry on IRI}}</ref> Both were used to turn the [[railbus]]es serving on these lines. After railbuses were replaced by [[MEMU]]s, turntables were dismantled. In 2012, Mumbai Metro One, the [[build-operate-transfer|BOT]] operator of the [[Line 1 (Mumbai Metro)|Mumbai Metro Line 1]], announced that it had procured turntables to be used on the [[Mumbai Metro|Rapid Transit system]].<ref name="mmopl">{{cite news|title=Metro retro: Forgotten turn-tables back on track |url=http://www.dnaindia.com/mumbai/report_metro-retro-forgotten-turn-tables-back-on-track_1715515|first=Rajendra|last=Aklekar|date=16 July 2012|agency=[[Daily News and Analysis]]|location=Mumbai|access-date=2012-07-22}}</ref> === Israel === The [[Israel Railway Museum]], Haifa, has a turntable made by Metropolitan Carriage, Wagon & Finance Company, Old Park Works, Wednesbury. It was found buried in the grounds of the [[Israel Defense Forces History Museum]], on the site of the old Jaffa railway station yard. === Romania === Like most ex-socialist countries of Eastern Europe, Romania still has several turntables in operational use. One can even see twin turntables, each with their own 180 degree roundhouse, like for one example at [[Timisoara]].<ref>https://www.openstreetmap.org/#map=18/45.75201/21.20205 Openstreetmap, retrieved 2021-12-11</ref> === Sri Lanka === In [[Sri Lanka]], most turntables which were used in the steam area have been abandoned. Most were situated at the major railway yards like [[Kandy]], Galle, Nanu Oya, [[Anuradhapura]], Maho, Galoya, [[Trincomalee]], [[Batticaloa]], Polgahawela Jnc, Badulla, Puttulam, and Bandarawela and depots in [[Dematagoda 2no.]] and [[Maradana]]. All turntables in [[Sri Lanka Railways]] were operated manually. They were used to turn some rolling stock and non-dual cab locomotives. Most turntables were later scrapped, though some have been preserved in museums. === United Kingdom === In Britain, where steam-hauled trains usually had [[Vacuum brake|vacuum-operated brakes]], it was quite common for turntables to be operated by [[vacuum motor]]s worked from the locomotive's vacuum ejector or pump via a flexible hose or pipe, although there are a few manually and electrically operated examples. The major manufacturers were [[Ransomes & Rapier|Ransomes and Rapier]], Ipswich and Cowans Sheldon, Carlisle. The [[Great Western Railway]] (GWR) built several tables for its own use; there is little evidence any other companies did so. === United States === Due to the asymmetric design of many locomotives, turntables still in use are more common in North America than in Europe, where locomotive design favors configurations with a controller cabin on both ends or in the middle. In San Francisco, US, the Powell [[San Francisco cable car system|cable car]] line uses turntables at the end of the routes, since the cable cars have operating controls at only one end of the car. The [[Long Island Rail Road]] still has a turntable and roundhouse at the Richmond Hills yard. == Surviving turntables == Several working examples remain, many on [[heritage railways]] in Great Britain, and also in the United States. Some examples are:<!-- No mention of any turntable in many of these "samples" --> <gallery mode="packed" heights="150px" caption="Surviving turntables"> File:Ferryhill turntable, May 2019.jpg|A4 Pacific No.9 "Union of South Africa" on the Ferryhill turntable, May 2019 File:Kleine Handbetätigte Drehscheibe im Textilmuseum Bocholt.jpg|A small turntable at the [[Bocholt textile museum]] File:2498 Spoorwegmuseum.jpg|[[Railway Museum (Netherlands)|Railway Museum (Spoorwegenmuseum)]] in [[Utrecht]] File:San Francisco Cable Car Turntable.jpg|Drivers turning a [[Cable car (railway)|cable car]] on a turntable on the [[San Francisco cable car system]] at [[Market Street, San Francisco|Market Street]], [[San Francisco]] File:SabahStateRailway-StationPapar04.jpg|Turntable on the [[Sabah State Railway]] at [[Papar, Malaysia|Papar]] Station ([[Sabah]], [[Malaysia]]) </gallery> {{columns-list|colwidth=40em| * Aberdeen, Ferryhill - 1906 70' Ransomes and Rapier (Restored by Ferryhill Railway Heritage Trust and in regular use for steam charters to Aberdeen since 2019 http://www.frht.org.uk) * Aviemore - ex Kyle of Lochalsh * [[Barrow Hill Engine Shed|Barrow Hill]] Cowans Sheldon 5231/1931 * [[Bryson City, North Carolina]] - [[Great Smoky Mountains Railroad]] (Bethlehem Steel, 1937 ex-Bangor & Aroostook) * [[Carnforth MPD|Carnforth]] * [[Chattanooga, Tennessee]]- [[Tennessee Valley Railroad Museum]] Soule Shops (American Bridge Company, 1916; ex-Central of Georgia Railway) * Chunghua, Taiwan - Still working with roundhouse and open to the public. [http://synapticism.com/changhua-fan-shaped-roundhouse/ synapticism.com] * [[Conklin, New York]] - Working 78-foot turntable at East Binghamton railroad yard (built in the 1990s), operated by [[Canadian Pacific Railway]]. Old roundhouse still survives near the yard on private property, currently in poor condition. Filled-in turntable base for the roundhouse can still be seen as well. * [[Currie, Minnesota|Currie, Minnesota's]] [[End O' Line Railroad Park & Museum]] * [[Paignton and Dartmouth Steam Railway|Churston]] ex Goodrington * Cultra; [[Ulster Folk and Transport Museum]] (Northern Ireland); 60’ Ransomes and Rapier table ex Athenry, Co. Galway. Covered over with flooring; can be operated when required. * Derby Works - within Bombardiers site, ca. 72' dia.. ( 52.905126,-1.457706 ) * Derby Roundhouse - table is in situ; but under the floor - see (http://www.railblue.com/pages/Related%20Rail%20Blue%20Info/DLWorks.revist.htm {{Webarchive|url=https://web.archive.org/web/20150115132810/http://www.railblue.com/pages/Related%20Rail%20Blue%20Info/DLWorks.revist.htm |date=2015-01-15 }}) * Dublin, Connolly Locomotive Depot; (Republic of Ireland) 55' (Manuf. and date not known) sees regular use. * Dublin, [[Connolly Station]];(Republic of Ireland) Cowans Sheldon 4369/1924 ; 45' dia; still sees occasional use. * [[M-Line Trolley|Dallas (McKinney Avenue)]]<!-- No mention of a turntable in the article! --> * Darlington North Road - out of use south of the station, west side of line. * [[Didcot Railway Centre|Didcot]] Ex Southampton Docks c.1976 - 70’ Ransomes and Rapier E2334/1935 * [[Fort William, Scotland|Fort William]] ex Marylebone, Cowans Sheldon CS 6355/1937, refurbished by RRMH 1999-2000 * Heaton, NoT * Hither Green; at rear of depot (ex Cannon Street table) * [[Hornsey]] Ferme Park; now removed to York and in use there 2012. * [[Guadalajara]], [[Ferromex]]<br>({{coord |20.648218 |-103.343494 |display=inline}}) * [[Kidderminster Town railway station|Kidderminster]] ex Fort William; 70’ Cowans Sheldon 8710/1945 * [[Keighley and Worth Valley Railway|Keighley]] ex Garsdale, Cowans Sheldon of 1884 * [[Rhaetian Railway]], [[Landquart, Switzerland|Landquart]], (1889) and [[Samedan]], [[Switzerland]]. Both are in use * [[Neville Hill Train Care Depot (Leeds)|Neville Hill]] * [[National Railway Museum|NRM York]] * [[Old Oak Common TMD|Old Oak Common]] the final one of the four: now removed to Swanage * [[Oyster Bay Railroad Museum]] * [[Port Jervis]] Erie Turntable (ca. 1940s Port Jervis, New York) * [[Railtown 1897 State Historic Park]] in [[Jamestown, California]] * [[Raleigh, North Carolina]] - Working 100-foot turntable (1917) in downtown district near the old Seaboard Station, operated by [[CSX Transportation]]. * [[Rowsley South railway station|Peak Rail, Rowsley South]] ex Mold Junction 60’, CS 6181/1937 * {{rws|Minehead|}}, part of [[West Somerset Railway]] * [[North Yorkshire Moors Railway|Pickering]]- ex York * [[San Francisco cable car system]] – three in revenue service, one at car barn * Statfold Barn – new build ca.2007, ca.15’, triple gauge. * Scarborough - ex Gateshead * St Blazey, Cornwall. Roundhouse and associated working turntable * Summerville, Georgia-Chattooga and Chickamauga Railway * [[Sudbury, Ontario]] - the 100-foot working electrically-powered turntable at Sudbury Yard, operated by [[Canadian Pacific Railway]] sees almost daily use in turning diesels for local and mainline service. * [[Spencer, North Carolina]] - Robert Julian Roundhouse and 100-foot working turntable (1924) at the historic [[North Carolina Transportation Museum]]. * [[Swanage Railway|Swanage]] 55' ex Neasden LT * [[Swindon]] - old Works area; GWR 1902 65'; listed structure. * [[Tournon-sur-Rhone]] - Train De L'Ardeche, steam train with manually operated turntable in France. * [[Tyseley Locomotive Works|Tyseley]] * Tanfield Rly. – Marley Hill - ca.15’ * [[Roundhouse Park|Toronto Railway Museum]] Original 120-foot CPR John St Roundhouse turntable restored in situ and operational * [[Veracruz (city)|Veracruz]], [[Ferrosur]]<br>({{coord|19.19968|-96.14607|display=inline}}) * [[Nene Valley Railway|Wansford]] * [[West Seneca, New York]] - Pennsylvania Railroad Shops and Roundhouse with 108-foot turntable (1918) * [[Yeovil Junction]] Cowans Sheldon works no. 9031 of ca.1946 * Whitehead (Northern Ireland) - installed 2016; ex Belfast Central Services Depot (Manufacturer, diameter and date not known) }} The following are in storage, awaiting installation at UK sites: * Barry Rly. – 65’ outer race. Dismantled (ex Bricklayers Arms 1970s; moved from Mid Hants Rly.) * North Norfolk Rly., Dismantled; to be installed at Holt 2017. Ex South Devon Rly. - (ex Hull Botanic Gardens in 2005; built 1955, 60 ft) * Midland Railway Centre – Swanwick Jnc. – Dismantled - Hand powered, Balanced 60’, (ex Chinley). * Severn Valley Rly. - Dismantled (ex Bristol Bath Road) Stored at Eardington. Intention is to install at Bridgnorth. 65’ 3’’ Ransom Rapier built 1957<ref>Severn Valley Railway News, Issue 126</ref> * East Lancs Rly. – Dismantled (ex Germany) – stored at Buckley Wells * Dean Forest Rly. - Dismantled (ex Calais Shed, SNCF, ex MLST Loughborough.) * Mid Norfolk Rly. – 60’ Dismantled R&R 1933 (ex Hitchin LNER ; ex Quainton, never installed there) to be installed at Dereham. * WCRC; stored Dismantled at Carnforth ; was proposed for Weymouth; ex Tyseley Locomotive Works Ltd.(onetime proposal to install at Stratford upon Avon) - ex Thornaby * Swanage Rly. Furzebrook ex Old Oak Common Depot 2011 - BR (WR) 70’ /125T ?E CS 9709/53 in use at Old Oak Common until 2008, used for HST power car turning etc. * Mallaig, Network Rail – Dismantled, scheme to install the ex Whitchurch table which is stored at Corpach or Fort William. * Stainmore Rly.Co., Kirkby Stephen East; 50’ or? 65’, outer race, hand powered. Ex Darlington station. Moved 1/2017. New build turntable. Hitachi Rail Europe's rolling stock plant at Newton Aycliffe in County Durham has an 80 tonne locomotive turntable and a bogie test turntable; supplied by Lloyds British Somers Group in 2016. The former Chicago, Milwaukee, St. Paul & Pacific (Milwaukee Road) in Janesville, Wisconsin. Used now by the regional Wisconsin & Southern == Accidents == {{globalize|section|USA|2name=the United States|date=September 2011}} In the [[United States]], when deciding liability for turntable accidents, most state courts followed the precedent set by the [[Supreme Court of the United States|United States Supreme Court]] in ''[[Sioux City & Pacific R.R. v. Stout]]'' (1873).<ref>{{cite book |last1=Epstein |first1=Richard A. |title=Cases and Materials on Torts |edition=9th |year=2008 |publisher=Aspen Publishers |location=United States of America |isbn=978-0-7355-6923-2 |page=[https://archive.org/details/casesmaterialson00epst_0/page/589 589] |url-access=registration |url=https://archive.org/details/casesmaterialson00epst_0/page/589 }}</ref> In that case, a six-year-old child was playing on the unguarded, unfenced turntable when his friends began turning it. While attempting to get off, his foot became stuck and was crushed. The Court held that although the railroad was not bound by the same duty of care to strangers as it was to its passengers, it would be liable for negligence "if from the evidence given it might justly be inferred by the jury that the defendant, in the construction, location, management, or condition of its machine has omitted that care and attention to prevent the occurrence of accidents which prudent and careful men ordinarily bestow."<ref>Sioux City & Pacific R.R. v. Stout, 84 U.S. 657,661 (1873)</ref> In the case of ''[[Chicago B. & Q.R. Co. v. Krayenbuhl]]'' (1902), a four-year-old child was playing on an unlocked, unguarded railroad turntable. Other children set the turntable in motion, and it severed the ankle of the young child. The child's family sued the railroad company on a theory of negligence and won at trial. The Nebraska Supreme Court held that the railroad company may have been liable for negligence after considering the "character and location of the premises, the purpose for which they are used, the probability of injury therefrom, the precautions necessary to prevent such injury, and the relations such precautions bear to the beneficial use of the premises." However, the Supreme Court reversed the trial court's decision based on an improper jury instruction as to the evidence.<ref>''Chicago, B & Q.R. Co. v. Krayenbuhl'', 65 Neb. 889, 91 N.W. 880, (Neb., 1902)"</ref> Accidents to locomotives sometimes occurred. For example, if the turntable was incorrectly set and a locomotive was accidentally started or failed to stop, it might fall into the turntable pit.<ref name="L&N">{{cite web|url=http://www.railpictures.net/viewphoto.php?id=398849&nseq=0|title=RailPictures.Net Photo: LN 1250 Louisville & Nashville Steam 2-8-0 at Pensacola, Florida by Collection of Ron Flanary|website=www.railpictures.net|access-date=7 April 2018}}</ref><ref name="CSXT 806">{{cite web|url=http://www.railpictures.net/viewphoto.php?id=289394|title=RailPictures.Net Photo: CSXT 806 CSX Transportation (CSXT) EMD SD80MAC at Cumberland, Maryland by Ed Mullan|website=www.railpictures.net|access-date=7 April 2018}}</ref> On rare occasions, a turntable would spin too fast during high winds, as happened at [[Garsdale railway station|Garsdale]] ([[Settle–Carlisle line]]) in the UK c.1900. At this very exposed location, this was resolved by surrounding the turntable with a wooden stockade made from old sleepers.<ref>''Settle-Carlisle Railway: the Midland's Record-breaking Route to Scotland'', p.46. (1966). Clapham (North Yorks.):Dalesman. [[W. R. Mitchell]] and David Joy.</ref>{{specify|reason=This incident needs to be explained in greater detail.}} == Unusual turntables == * The roundhouse in [[Montluçon]], France, was equipped with a separate turntable and sector plate, which is a table pivoted at one end, in this case at the edge of the turntable. The sector plate served the side of the roundhouse that housed autorails with less requirement for turning. Both the turntable and sector plate were served by separate connections to the roundhouse. If turning was required the two could be connected together. The resulting roundhouse was not completely circular. Part of the roundhouse with the turntable is still extant.<ref>{{cite web|url=http://www.aaatvmontlucon.fr/pages/historique-du-depot/historique.html|title=Historique du dépôt de Montluçon du début du XIX siècle à nos jours|website=www.aaatvmontlucon.fr|access-date=7 April 2018}}</ref><ref>Voies Ferrées, Edition 209, May–June 2015.</ref> A similar, operational sector plate is located in Bavaria at the [[German Steam Locomotive Museum]]. * Due to a lack of space at [[Ventnor railway station]], a small turntable was provided to allow steam engines to run around their trains. Other stations with this arrangement included {{rws|Bembridge}}, [[Withernsea railway station|Withernsea]] and {{rws|Harcourt Street}}. * The last remaining operational triple-gauge turntable in the world, used to station trains into the 23 bay roundhouse, exists at the [[Steamtown Heritage Centre]] in [[Peterborough, South Australia]].<ref>{{Cite web|url=http://www.steamtown.com.au/about|title=Steamtown About|access-date=2020-08-17|archive-date=2020-05-10|archive-url=https://web.archive.org/web/20200510142643/http://www.steamtown.com.au/about|url-status=dead}}</ref> * A turntable exists on the [[Midland Line, New Zealand]] at [[Arthurs Pass]] in New Zealand. Steam engines on excursions cannot enter the Otira tunnel so must be turned around for the return <gallery mode="packed" heights="150px" caption="Unusual turntables"> File:DRG Class 41 on Neuenmarkt turntable.JPG|A heavy German goods locomotive on the turntable at the [[German Steam Locomotive Museum]], [[Bavaria]]. The pivot of this turntable is off-center, which prevents the turntable from rotating a full 360 degrees. File:Twin-gauge straight + curved turntable at PTVF, Brussels.jpg|[[Twin-gauge]] straight + curved turntable at Petit Train à Vapeur de Forest, Brussels File:Fort Saint-Gobain p1410061.jpg|[[Decauville]] turntable </gallery> == Multiple turntables == Stations housing large numbers of engines may have more than one turntable: * {{flagicon|United Kingdom}} [[Old Oak Common TMD]] – formerly 4 * {{flagicon|Australia}} [[Enfield, New South Wales|Enfield]] – formerly 3 (none survives today) * {{flagicon|Australia}} [[Broadmeadow Locomotive Depot|Broadmeadow]] – 2 (3rd removed, now in [[Thirlmere, NSW]]) * {{flagicon|Sweden}} [[Falun]] – 2 * {{flagicon|Sweden}} [[Hallsberg]] – 2 * {{flagicon|Sweden}} [[Gothenburg]] Sävenäs yard – 2 (Second removed ~2005) * {{flagicon|New Zealand}} [[Linwood, New Zealand|Linwood]] – formerly 2 (second removed during 1980/1990s) * {{flagicon|Spain}} [[Valladolid]] ({{coord |41.6403 |-4.7292 |display=inline |type:railwaystation }}) – 2 == See also == *[[List of railway roundhouses]], most or all of which include a turntable * [[Wye (railroad)|Wye]] – a way of turning whole trains. * [[Transfer table]] (UK: 'traverser') – provides access to two or more parallel [[Rail tracks|tracks]] in a space saving manner like a turntable, but without the ability to turn. * A [[Sector plate]] or [[sector table]] is a traverser that rotates around a pivot that is not at the centre and therefore cannot rotate through 360˚. * Nowadays [[Control car (rail)|control cars]], or coaches with controls at one end, have largely eliminated the need for turntables. * Singapore and Hong Kong have a combined [[Transfer table|traverser]]-turntable that takes 4-car sets. == References == {{Reflist|33em}} ==Further reading== *{{cite magazine|title=One good turn deserves another|magazine=Hornby Magazine|first=Alan|last=Earnshaw|pages=116-119|issue=6|date=December 2007|location=Hersham|publisher=Ian Allan Publishing|issn=1753-2469|oclc=226087101}} ==External links== *{{Commons category-inline|Rail transport turntables}} {{Rail tracks}} {{Authority control}} {{DEFAULTSORT:Railway turntable}} [[Category:Railway turntables| ]] [[Category:Rail infrastructure|Turntable]] [[Category:Articles containing video clips]] [[Category:Rail junction types]]
Edit summary
(Briefly describe your changes)
By publishing changes, you agree to the
Terms of Use
, and you irrevocably agree to release your contribution under the
CC BY-SA 4.0 License
and the
GFDL
. You agree that a hyperlink or URL is sufficient attribution under the Creative Commons license.
Cancel
Editing help
(opens in new window)
Pages transcluded onto the current version of this page
(
help
)
:
Template:Ambox
(
edit
)
Template:Authority control
(
edit
)
Template:Cite book
(
edit
)
Template:Cite magazine
(
edit
)
Template:Cite news
(
edit
)
Template:Cite web
(
edit
)
Template:Clear
(
edit
)
Template:Columns-list
(
edit
)
Template:Commons category-inline
(
edit
)
Template:Convert
(
edit
)
Template:Coord
(
edit
)
Template:Flagicon
(
edit
)
Template:Globalize
(
edit
)
Template:Main
(
edit
)
Template:More citations needed
(
edit
)
Template:Other uses
(
edit
)
Template:RailGauge
(
edit
)
Template:Rail tracks
(
edit
)
Template:Reflist
(
edit
)
Template:Rws
(
edit
)
Template:Short description
(
edit
)
Template:Specify
(
edit
)