Editing Single-lens reflex camera

{{Short description|Camera that typically uses a mirror and prism system}}
{{Multiple issues|
{{Lead too short|date=December 2023}}
{{More citations needed|date=December 2023}}
}}
[[File:Exa camera.jpg|thumb|right|upright=1.36|Ihagee Exa Single lens reflex]]

[[File:Contax-s.jpg|thumb|right|upright=1.13|The [[Contax|Zeiss Ikon VEB Contax S]], manufactured in [[Dresden]], one of the two original [[pentaprism]] SLRs for eye-level viewing that went into production in 1949. The Italian [[Rectaflex]] offered its first production SLR, the series 1000, the same year.]]

In [[photography]], a '''single-lens reflex camera (SLR)''' is a type of camera that uses a mirror and prism system to allow photographers to view through the lens and see exactly what will be captured. SLRs became the dominant design for professional and consumer-level cameras throughout the late 20th century, offering interchangeable lenses, through-the-lens (TTL) metering, and precise framing. Originating in the 1930s and popularized in the 1960s and 70s, SLR technology played a crucial role in the evolution of modern photography. Although digital single-lens reflex (DSLR) cameras succeeded film-based models, the rise of mirrorless cameras in the 2010s has led to a decline in SLR use and production. With [[twin lens reflex]] and [[rangefinder cameras]], the viewed image could be significantly different from the final image. When the shutter button is pressed on most SLRs, the mirror flips out of the light path and allows light to pass through to the light receptor and the image to be captured.

== History ==
{{Main|History of the single-lens reflex camera}}
[[File:Nikon SLR Camera cutaway.jpg|thumb|left|Cross section of SLR camera.]]
Until the development of SLR, all cameras with viewfinders had two optical light paths: one through the lens to the film and another positioned above ([[Twin-lens reflex camera|TLR or ''twin-lens reflex'']]) or to the side ([[Rangefinder camera|rangefinder]]). Because the viewfinder and the film lens cannot share the same optical path, the viewing lens is aimed to intersect with the film lens at a fixed point somewhere in front of the camera. This is not problematic for pictures taken at a middle or longer distance, but [[parallax]] causes framing errors in close-up shots. Moreover, it is not easy to focus the lens of a fast reflex camera when it is opened to wider [[apertures]] (such as in low light or while using low-speed film).

Most SLR cameras permit upright and laterally correct viewing through use of a [[pentaprism|roof pentaprism]] situated in the optical path between the reflex mirror and viewfinder. Light, which comes both horizontally and vertically inverted after passing through the lens, is reflected upwards by the reflex mirror, into the [[pentaprism]] where it is reflected twice to correct the inversions caused by the lens, and align the image with the [[viewfinder]]. When the [[Shutter (photography)|shutter]] is released, the mirror moves out of the light path, and the light shines directly onto the film (or in the case of a [[Digital single-lens reflex camera|DSLR]], the [[Charge-coupled device|CCD]] or [[CMOS]] imaging sensor). Exceptions to the moving mirror system include the Canon Pellix and [[Sony_SLT_camera|Sony SLT cameras]], along with several special-purpose high-speed cameras (such as the Canon EOS-1N RS), whose mirror was a fixed [[Beam splitter|beamsplitting]] [[Pellicle mirror|pellicle]].

Focus can be adjusted manually by the photographer or automatically by an [[autofocus]] system. The viewfinder can include a matte [[Focus (optics)|focusing]] screen located just above the mirror system to diffuse the light. This permits accurate viewing, composing and focusing, especially useful with interchangeable lenses.

Up until the 1990s, SLR was the most advanced photographic preview system available, but the recent development and refinement of digital imaging technology with an on-camera live LCD preview screen has overshadowed SLR's popularity. Nearly all inexpensive compact digital cameras now include an LCD preview screen allowing the photographer to see what the CCD is capturing. However, SLR is still popular in high-end and professional cameras because they are [[system camera]]s with interchangeable parts, allowing customization. They also have far less [[shutter lag]], allowing photographs to be timed more precisely. Also the [[pixel]] resolution, [[contrast ratio]], [[refresh rate]], and color [[gamut]] of an LCD preview screen cannot compete with the clarity and shadow detail of a direct-viewed optical SLR viewfinder.

[[Large format]] SLR cameras were probably first marketed with the introduction of C.R. Smith's ''Monocular Duplex'' (U.S., 1884).<ref>One was patented in 1861 ([[Thomas Sutton (photographer)|Thomas Sutton]]), but it is not clear if a second example was ever produced; Calvin Rae Smith's design of a Patent Monocular Duplex camera was advertised and sold. Spira, ''The History of Photography,'' 119.</ref> SLRs for smaller exposure formats were launched in the 1920s by several camera makers. The first [[35&nbsp;mm format|35&nbsp;mm]] SLR available to the mass market, Leica's PLOOT reflex housing along with a 200&nbsp;mm f4.5 lens paired to a [[35&nbsp;mm format|35&nbsp;mm]] rangefinder camera body, debuted in 1935. The Soviet [[Sport_(camera)|''Спорт'' (“Sport”)]],<ref>[[:ru:Спорт (фотоаппарат)|A. O. Gelgar's ''Sport'']]</ref> also a 24&nbsp;mm by 36&nbsp;mm image size, was prototyped in 1934 and went to market in 1937. K. Nüchterlein's [[Kine Exakta]] (Germany, 1936) was the first integrated [[35&nbsp;mm format|35&nbsp;mm]] SLR to enter the market. Additional [[Exakta]] models, all with waist-level finders, were produced up to and during [[World War II]]. Another ancestor of the modern SLR camera was the Swiss-made [[Alpa]], which was innovative,<!-- How was it innovative? --> and influenced the later Japanese cameras. The first eye-level SLR viewfinder was patented in Hungary on August 23, 1943, by Jenő Dulovits, who then designed the first 35&nbsp;mm camera with one, the [[Duflex]], which used a system of mirrors to provide a laterally correct, upright image in the eye-level viewfinder. The Duflex, which went into serial production in 1948, was also the world's first SLR with an instant-return (a.k.a. autoreturn) mirror.

The first commercially-produced SLR that employed a roof [[pentaprism]] was the Italian [[Rectaflex]] A.1000, shown in full working condition at a Milan fair in April 1948 and produced from September the same year. It was thus on the market one year before the East German [[Contax|Zeiss Ikon VEB Contax S]], announced on May 20, 1949, produced from September.

The Japanese adopted and further developed the SLR. In 1952, [[Pentax|Asahi]] developed the [[Asahiflex]] and in 1954, the [[Asahiflex IIB]]. In 1957, the [[Asahi Pentax]] combined the fixed pentaprism and the right-hand thumb wind lever. [[Nikon Corporation|Nikon]], [[Canon Inc.|Canon]] and [[Yashica]] introduced their first SLRs in 1959 (the [[Nikon F|F]], [[Canon Canonflex|Canonflex]], and Pentamatic, respectively).

== Digital SLRs ==
{{Main|Digital single-lens reflex camera}}

Canon, Nikon and [[Pentax]] have all developed digital SLR cameras (DSLRs) using the same lens mounts as on their respective film SLR cameras.<ref>{{Cite book|url=https://books.google.com/books?id=rixBBAAAQBAJ&q=Canon%2C+Nikon+and+Pentax+have+all+developed+digital+SLR+cameras+%28DSLRs%29+using+the+same+lens+mounts+as+on+their+respective+film+SLR+cameras.&pg=PA109|title=Digital SLR Cameras and Photography For Dummies|last=Busch|first=David D.|date=2014-09-15|publisher=John Wiley & Sons|isbn=978-1-118-97183-3|language=en}}</ref> Konica Minolta did the same, and after having bought Konica Minolta's camera division in 2006. Sony continues using the Minolta AF lens mount in their DSLRs, including cameras built around [[Sony SLT camera|a semi-transparent fixed mirror]]. Samsung builds DSLRs based on the [[Pentax]] lens mount. [[Olympus (company)|Olympus]], on the other hand, chose to create a new digital-only [[Four Thirds System]] SLR standard, adopted later by Panasonic and Leica.

Contax came out with a DSLR model, the [[Contax N Digital|Contax N-Digital]]. This model was too late and too expensive to be competitive with other camera manufacturers. The Contax N-digital was the last Contax to use that maker's lens system, and the camera, while having impressive features such as a full-frame sensor, was expensive and lacked sufficient write-speed to the memory card for it to be seriously considered by some professional photographers.

The digital single-lens reflex camera have largely replaced film SLRs design in convenience, sales and popularity at the start of the 21st century.

== Optical components ==
[[File:R-DSC08774-WMC.jpg|thumb|upright=1.13|Focusing screen on Praktica Super TL1000]]
[[File:SLR cross section.svg|thumb|upright=1.13|Cross-section view of SLR system:
1: Front-mount lens (four-element Tessar design)
2: Reflex mirror at 45-degree angle
3: Focal plane shutter
4: Film or sensor
5: Reflex mirror in the up position
6: [[Focusing screen]]
7: Optical glass pentaprism (or pentamirror)
8: Eyepiece (can have diopter correction ability)]]

A cross-section (''or'' 'side-view') of the optical components of a typical SLR camera shows how the light passes through the lens assembly, is reflected by the mirror placed at a 45-degree angle, and is projected on the matte [[focusing screen]]. Via a condensing lens and internal reflections in the roof pentaprism the image appears in the eyepiece. When an image is taken, the mirror moves upwards from its resting position in the direction of the arrow, the focal plane shutter opens, and the image is projected onto the [[photographic film|film]] or [[Charge-coupled device|sensor]] in exactly the same manner as on the focusing screen.

This feature distinguishes SLRs from other cameras as the photographer sees the image composed exactly as it will be captured on the film or [[Charge-coupled device|sensor]].

[[File:SLR Pentaprism.svg|thumb|upright=1.13|A perspective drawing showing how a roof pentaprism corrects a laterally reversed SLR image]]

Most 35&nbsp;mm SLRs use a roof [[pentaprism]] or penta-mirror to direct the light to the eyepiece, first used on the 1948 [[Duflex]]<ref>{{cite web|url=http://bichkov.com/photopedia/index.php?title=SLR_Camera |title=Article at Photopedia |publisher=Bichkov.com |date=2008-01-23 |access-date=2013-10-15}}</ref> constructed by [[Jenő Dulovits]] and patented August 1943 (Hungary). With this camera also appeared the first [[instant-return mirror]].
The first Japanese pentaprism SLR was the 1955 [[Miranda T (camera)|Miranda T]], followed by the Asahi Pentax, Minolta SR-2, Zunow, Nikon F and the [[Yashica]] Pentamatic. Some SLRs offered removable pentaprisms with optional viewfinder capabilities, such as the [[waist-level finder]], the interchangeable sports finders used on the Canon F1 and F1n; the [[Nikon]] F, F2, F3, F4 and F5; and the Pentax LX.

Another prism design was the [[porro prism]] system used in the [[Olympus Pen F]], the Pen FT, the Pen FV half-frame 35&nbsp;mm SLR cameras. This was later used on the [[Olympus E-300|Olympus EVOLT E-3x0]] series, the [[Leica Camera|Leica]] Digilux 3 and the [[Panasonic Lumix DMC-L1|Panasonic DMC-L1]].

A right-angle finder is available that slips onto the eyepiece of most SLRs and D-SLRs and allows viewing through a waist-level viewfinder. There is also a finder that provides EVF remote capability.

== Shutter mechanisms ==
{{Main|Shutter (photography)}}

Almost all contemporary SLRs use a [[focal-plane shutter]] located in front of the film plane, which prevents the light from reaching the film even if the lens is removed, except when the shutter is actually released during the exposure. There are various designs for focal plane shutters. Early focal-plane shutters designed from the 1930s onwards usually consisted of two curtains that travelled horizontally across the film gate: an opening shutter curtain followed by a closing shutter curtain. During fast shutter speeds, the focal-plane shutter would form a 'slit' whereby the second shutter curtain was closely following the first opening shutter curtain to produce a narrow, vertical opening, with the shutter slit moving horizontally. The slit would get narrower as shutter speeds were increased. Initially these shutters were made from a cloth material (which was in later years often rubberised), but some manufacturers used other materials instead. Nippon Kōgaku (now [[Nikon Corporation]]), for example, used [[titanium]] foil shutters for several of their flagship SLR cameras, including the [[Nikon F]], [[Nikon F2|F2]], and [[Nikon F3|F3]].

Other focal-plane shutter designs, such as the [[Nidec Copal Corporation|Copal]] Square, travelled vertically&nbsp;— the shorter travelling distance of 24 millimetres (as opposed to 36&nbsp;mm horizontally) meant that minimum exposure and flash synchronisation times could be reduced. These shutters are usually manufactured from metal, and use the same moving-slit principle as horizontally travelling shutters. They differ, though, in usually being formed of several slats or blades, rather than single curtains as with horizontal designs, as there is rarely enough room above and below the frame for a one-piece shutter. Vertical shutters became very common in the 1980s (though [[Konica]], [[Mamiya]], and Copal first pioneered their use in the 1950s and 1960s, and are almost exclusively used for new cameras. Nikon used Copal-made vertical plane shutters in their Nikomat/Nikkormat -range, enabling x-sync speeds from {{frac|1|30}} to {{frac|1|125}} while the only choice for focal plane shutters at that time was {{frac|1|60}}. Later, Nikon again pioneered the use of titanium for vertical shutters, using a special honeycomb pattern on the blades to reduce their weight and achieve world-record speeds in 1982 of {{frac|1|4000}} second for non-sync shooting, and {{frac|1|250}} with x-sync. Nowadays most such shutters are manufactured from cheaper aluminium (though some high-end cameras use materials such as [[carbon-fibre]] and [[Kevlar]]).

Another shutter system is the [[leaf shutter]], whereby the shutter is constructed of diaphragm-like blades and can be situated either between the lens or behind the lens. If the shutter is part of a lens assembly some other mechanism is required to ensure that no light reaches the film between exposures. An example of a behind-the-lens leaf shutter is found in the 35&nbsp;mm SLRs produced by [[Kodak]], with their Retina Reflex camera line; Topcon, with their Auto 100; and Kowa with their SE-R and SET-R reflexes. A primary example of a medium-format SLR with a between-the-lens leaf shutter system would be [[Hasselblad]], with their 500C, 500&nbsp;cm, 500 EL-M (a motorized Hasselblad) and other models (producing a 6&nbsp;cm square negative). Hasselblads use an auxiliary shutter blind situated behind the lens mount and the mirror system to prevent the fogging of film. Other medium-format SLRs also using leaf shutters include the now discontinued Zenza-Bronica camera system lines such as the Bronica ETRs, the ETRs'i (both producing a 6&nbsp;×&nbsp;4.5&nbsp;cm. image), the SQ and the SQ-AI (producing a 6&nbsp;×&nbsp;6&nbsp;cm image like the Hasselblad), and the Zenza-Bronica G system (6&nbsp;×&nbsp;7&nbsp;cm). Certain Mamiya medium-format SLRs, discontinued camera systems such as the Kowa 6 and a few other camera models also used between-the-lens leaf shutters in their lens systems. Thus, any time a photographer purchased one of these lenses, that lens included a leaf shutter in its lens mount. Because leaf shutters synchronized electronic flash at all shutter speeds especially at fast shutter speeds of {{frac|1|500}} of a second or faster, cameras using leaf shutters were more desirable to studio photographers who used sophisticated studio electronic flash systems. Some manufacturers of medium-format [[120 film]] SLR cameras also made leaf-shutter lenses for their focal-plane-shutter models. Rollei made at least two such lenses for their Rolleiflex SL-66 medium format which was a focal-plane shutter SLR. Rollei later switched to a camera system of leaf-shutter design (e.g., the 6006 and 6008 reflexes) and their current medium-format SLRs are now all of the between-the-lens shutter design.

== Further developments ==
[[File:Reflex camera (description).svg|thumb|upright=1.36|right|Parts]]
Since the technology became widespread in the 1970s, SLRs have become the main photographic instrument used by dedicated amateur photographers and professionals. Some photographers of static subjects (such as architecture, landscape, and some commercial subjects), however, prefer [[view camera]]s because of the capability to control perspective.<ref>{{cite web
|url=http://www.naturephotographers.net/articles0703/gt0703-1.html
|title = Introduction to Large Format
|access-date = 2007-08-28
|last = Tal
|first = Guy
|work = Nature Photographers Online Magazine
}}</ref> With a triple-extension bellows 4" × 5" camera such as the Linhof SuperTechnika V, the photographer can correct certain distortions such as "keystoning", where the image 'lines' converge (i.e., photographing a building by pointing a typical camera upward to include the top of the building). [[Perspective correction lens]]es are available in the 35&nbsp;mm and medium formats to correct this distortion with film cameras, and it can also be corrected after the fact with photo software when using digital cameras. The photographer can also extend the bellows to its full length, tilt the front standard and perform photomacrography (commonly known as '[[macro photography]]'), producing a sharp image with depth-of-field without stopping down the lens diaphragm.

== Film formats ==
{{Main|Film format}}

Early SLRs were built for [[large format]] photography, but this film format has largely lost favor among professional photographers. SLR film-based cameras have been produced for most [[film format]]s as well as for digital formats. These film-based SLRs use the [[135 film|35&nbsp;mm format]] as, this film format offers a variety of emulsions and film sensitivity speeds, usable image quality and a good market cost. 35&nbsp;mm film comes in a variety of exposure lengths: 20 exposure, 24 exposure and 36 exposure rolls. [[Medium format (film)|Medium format]] SLRs provide a higher-quality image with a negative that can be more easily retouched than the smaller 35&nbsp;mm negative, when this capability is required.

A small number of SLRs were built for [[Advanced Photo System|APS]] such as the Canon IX series and the Nikon Pronea cameras. SLRs were also introduced for film formats as small as Kodak's [[110 film|110]], such as the [[Pentax Auto 110]], which had interchangeable lenses.
[[File:White Narciss camera.JPG|thumb|right|upright=1.36|16&nbsp;mm SLR Narciss camera]]
The [[Narciss camera]] is an all-metal 16&nbsp;mm subminiature single lens reflex camera made by Russian optic firm Krasnogorsky Mekhanichesky Zavod (KMZ) Narciss (Soviet Union; Нарцисс) between 1961 and 1965.

== Common features ==
[[File:Cut-away Minotla SLR IMG 0378.jpg|thumb|Cut-away of a [[Minolta XE]] film-based SLR]]
[[File:Cut-away Minotla SLR IMG 0377.jpg|thumb]]

Other features found on many SLR cameras include [[through-the-lens metering|through-the-lens (TTL) metering]] and sophisticated flash control referred to as "dedicated electronic flash". In a dedicated system, once the dedicated electronic flash is inserted into the camera's hot shoe and turned on, there is then communication between camera and flash. The camera's synchronization speed is set, along with the aperture. Many camera models measure the light that reflects off of the film plane, which controls the flash duration of the electronic flash. This is denoted [[Through-the-lens metering#Through the lens flash metering|TTL flash metering]].

Some electronic flash units can send out several short bursts of light to aid the autofocus system or for wireless communication with off-camera flash units. A pre-flash is often used to determine the amount of light that is reflected from the subject, which sets the duration of the main flash at time of exposure. Some cameras also employ automatic fill-flash, where the flash light and the available light are balanced. While these capabilities are not unique to the SLR, manufacturers included them early on in the top models, whereas the best rangefinder cameras adopted such features later.

== Design considerations ==

Many of the advantages of SLR cameras derive from viewing and focusing the image through the attached lens. Most other types of cameras do not have this function; subjects are seen through a viewfinder that is near the lens, making the photographer's view different from that of the lens. SLR cameras provide photographers with precision; they provide a viewing image that will be exposed onto the negative exactly as it is seen through the lens. There is no [[parallax]] error, and exact focus can be confirmed by eye—especially in [[macro photography]] and when photographing using [[long focus lens]]es. The [[depth of field]] may be seen by stopping down to the attached lens [[aperture]], which is possible on most SLR cameras except for the least expensive models. Because of the SLR's versatility, most manufacturers have a vast range of lenses and accessories available for them.

Compared to most fixed-lens compact cameras, the most commonly used and inexpensive SLR lenses offer a wider aperture range and larger maximum aperture (typically {{f/|1.4|link=yes}} to {{f/|1.8}} for a 50&nbsp;mm lens). This allows photographs to be taken in lower light conditions without flash, and allows a narrower depth of field, which is useful for blurring the background behind the subject, making the subject more prominent. "Fast" lenses are commonly used in theater photography, portrait photography, surveillance photography, and all other photography requiring a large maximum aperture.

<!-- In the diagram the light path through the roof pentaprism is shown in simplified form. In fact an odd number of reflections are required to rectify the image on the ground glass screen. The first reflection from the moving mirror requires an additional three reflections inside the prism. Two only are shown.
 -->
The variety of lenses also allows for the camera to be used and adapted in many different situations. This provides the photographer with considerably more control (i.e., how the image is viewed and framed) than would be the case with a view camera. In addition, some SLR lenses are manufactured with extremely long focal lengths, allowing a photographer to be a considerable distance away from the subject and yet still expose a sharp, focused image. This is particularly useful if the subject includes dangerous animals (e.g., wildlife); the subject prefers anonymity to being photographed; or else, the photographer's presence is unwanted (e.g., celebrity photography or surveillance photography). Practically all SLR and DSLR camera bodies can also be attached to telescopes and microscopes via an adapter tube to further enhance their imaging capabilities.

[[File:Pentax super me open back.gif|thumb|During an exposure, the viewfinder is blocked]]


In most cases, single-lens reflex cameras cannot be made as small or as light as other camera designs—such as [[rangefinder camera]]s, autofocus [[compact camera]]s and digital cameras with [[electronic viewfinder]]s (EVF)—owing to the mirror box and pentaprism/pentamirror. The mirror box also prevents lenses with deeply recessed rear elements from being mounted close to the film or sensor unless the camera has a mirror lockup feature; this means that simple designs for [[wide angle lens]]es cannot be used. Instead, larger and more complex [[retrofocus]] designs are required.

The SLR mirror 'blacks-out' the viewfinder image during the exposure. In addition, the movement of the reflex mirror takes time, limiting the maximum shooting speed. The mirror system can also cause noise and vibration. Partially reflective (pellicle) fixed mirrors avoid these problems and have been used in a very few designs including the [[Canon Pellix]] and the [[Canon EOS-1N RS]], but these designs introduce their own problems. These pellicle mirrors reduce the amount of light travelling to the film plane or sensor and also can distort the light passing through them, resulting in a less-sharp image. To avoid the noise and vibration, many professional cameras offer a [[mirror lock-up]] feature, however, this feature totally disables the SLR's automatic focusing ability. Electronic viewfinders have the potential to give the 'viewing-experience' of a DSLR (through-the-lens viewing) without many of the disadvantages. More recently, [[Sony]] have resurrected the pellicle mirror concept in their "[[single-lens translucent camera|single-lens translucent]]" (SLT) range of cameras.

SLRs vary widely in their construction and typically have bodies made of plastic or magnesium. Most manufacturers do not cite durability specifications, but some report shutter life expectancies for professional models. For instance, the Canon EOS 1Ds MkII is rated for 200,000 shutter cycles and the Nikon D3 is rated for 300,000 with its exotic carbon fiber/kevlar shutter. Because many SLRs have interchangeable lenses, there is a tendency for dust, sand and dirt to get into the main body of the camera through the mirror box when the lens is removed, thus dirtying or even jamming the mirror movement mechanism or the shutter curtain mechanism itself. In addition, these particles can also jam or otherwise hinder the focusing feature of a lens if they enter into the focusing helicoid. The problem of sensor cleaning has been somewhat reduced in [[DSLR]]s as some cameras have a built-in sensor cleaning unit.

The price of SLRs in general also tends to be somewhat higher than that of other types of cameras, owing to their internal complexity. This is compounded by the expense of additional components, such as flashes or lenses. The initial investment in equipment can be prohibitive enough to keep some casual photographers away from SLRs, although the market for used SLRs has become larger particularly as photographers migrate to digital systems.


[[File:Pentax-K1000-shutter.ogv| The SLR mirror 'blacks-out' the viewfinder image during the exposure on this film SLR, the Pentax K1000 without a lense]]

== Future ==
The digital single-lens reflex camera has largely replaced the film SLR for its convenience, sales, and popularity at the start of the 21st century. These cameras were the marketing favorite among advanced amateur and professional photographers through the first two decades of the 2000s. Around 2010, the mirrorless technology utilized in point and shoot cameras made the way to the interchangeable lens cameras and slowly replaced DSLR technology.

As of 2022, all the major camera brands (Except Pentax) ceased development and production of DSLRs and moved on to [[Mirrorless camera|mirrorless systems]].  These systems offer multiple advantages to the photographer with regards to autofocus systems as well as the ability to update the lens technologies due to the reduced distance between the back of the lens and the sensor resulting from the removal of the mirror.  

Film-based SLRs are still used by a niche market of enthusiasts and format lovers.<ref>{{cite web|url=http://collider.com/film-camera-production-ended-arri-panavision-aaton/|title=ARRI, Panavision, and Aaton Cease Production of Film Cameras; Will Focus Exclusively on Digital| website=[[Collider (website)|Collider]] | date=12 October 2011 }}</ref>

== See also ==
* [[Asahi Pentax]]
* [[Fujifilm]]
* [[Lenses for SLR and DSLR cameras]]
* [[Scheimpflug principle]]
* [[Zeiss Ikon]]

== References ==
{{Reflist}}

== Further reading ==
* Spira, S. F. ''The History of Photography as Seen through the Spira Collection.'' New York: Aperture, 2001. {{ISBN|0-89381-953-0}}.
* Antonetto, Marco: "Rectaflex – The Magic Reflex". Nassa Watch Gallery, 2002. {{ISBN|88-87161-01-1}}

== External links ==
{{Commons category|SLR cameras}}
* Photography in Malaysia's [http://www.mir.com.my/rb/photography/htmls/contax_history/history2.htm Contax History, Part II].
* [https://web.archive.org/web/19991008124708/http://www.geocities.com/RainForest/Andes/3256/innocams.html 'Innovative Cameras' by Massimo Bertacchi]
* [https://sl66.rolleigraphy.eu/ Rolleiflex SL 66] (Rolleiflex SL 66 Medium Format Single Lens Reflex camera).

{{Photography}}
{{Authority control}}

[[Category:Cameras by type]]
[[Category:Single-lens reflex cameras| ]]