Editing Wheatstone bridge

{{Short description|System to measure electrical resistance}}
{{More citations needed|date=March 2019}}

[[Image:Wheatstonebridge.svg|thumb|300px|alt=A Wheatstone bridge has four resistors forming the sides of a diamond shape. A battery is connected across one pair of opposite corners, and a galvanometer across the other pair. |Wheatstone bridge [[circuit diagram]]. The unknown resistance ''R''<sub>''x''</sub> is to be measured; resistances ''R''<sub>1</sub>, ''R''<sub>2</sub> and ''R''<sub>3</sub> are known, where ''R''<sub>2</sub> is adjustable. When the measured voltage ''V''<sub>''G''</sub> is 0, both legs have equal voltage ratios: ''R''<sub>2</sub>/''R''<sub>1</sub> =&nbsp;''R''<sub>''x''</sub>/''R''<sub>3</sub> and ''R''<sub>''x''</sub>=&nbsp;''R''<sub>3</sub>''R''<sub>2</sub>/''R''<sub>1</sub>.]]

A '''Wheatstone bridge''' is an [[electrical circuit]] used to measure an unknown [[electrical resistance]] by balancing two legs of a [[bridge circuit]], one leg of which includes the unknown component. The primary benefit of the circuit is its ability to provide extremely accurate measurements (in contrast with something like a simple [[voltage divider]]).<ref>"Circuits in Practice: The Wheatstone Bridge, What It Does, and Why It Matters", as discussed in this MIT ES.333 class [https://www.youtube.com/watch?v=-G-dySnSSG4 video]</ref> Its operation is similar to the original [[Potentiometer (measuring instrument)|potentiometer]].

The Wheatstone bridge was invented by [[Samuel Hunter Christie]] (sometimes spelled "Christy") in 1833 and improved and popularized by Sir [[Charles Wheatstone]] in 1843.<ref>{{cite journal |last=Wheatstone |first=Charles |date=1843 |title=XIII. The Bakerian lecture.—An account of several new instruments and processes for determining the constants of a voltaic circuit |journal=Phil. Trans. R. Soc. |volume=133 |pages=303–327 |doi=10.1098/rstl.1843.0014}}</ref>  One of the Wheatstone bridge's initial uses was for [[soil analysis]] and comparison.<ref>{{cite journal |title=The Genesis of the Wheatstone Bridge |first=Stig |last=Ekelof |journal=Engineering Science and Education Journal |volume=10 |issue=1 |date=February 2001 |pages=37–40 |doi=10.1049/esej:20010106  |doi-broken-date=7 December 2024 |url=https://edisciplinas.usp.br/pluginfile.php/5618117/mod_resource/content/1/The%20genesis%20of%20Wheatstone%20bridge.pdf}} discusses [[Samuel Hunter Christie|Christie's]] and [[Charles Wheatstone|Wheatstone]]'s contributions, and why the bridge carries Wheatstone's name.</ref>

== Operation ==
In the figure, {{math|''R<sub>x</sub>''}} is the fixed, yet unknown, resistance to be measured.
{{math|''R''<sub>1</sub>}}, {{math|''R''<sub>2</sub>}}, and {{math|''R''<sub>3</sub>}} are resistors of known resistance and the resistance of {{math|''R''<sub>2</sub>}} is adjustable. The resistance {{math|''R''<sub>2</sub>}} is adjusted until the bridge is "balanced" and no current flows through the  [[galvanometer]] {{math|''V<sub>g</sub>''}}. At this point, the [[potential difference]] between the two midpoints (B and D) will be zero.  Therefore the ratio of the two resistances in the known leg {{math|(''R''<sub>2</sub>&thinsp;/&thinsp;''R''<sub>1</sub>)}} is equal to the ratio of the two resistances in the unknown leg {{math|(''R<sub>x</sub>''&thinsp;/&thinsp;''R''<sub>3</sub>)}}.  If the bridge is unbalanced, the direction of the current indicates whether {{math|''R''<sub>2</sub>}} is too high or too low.

At the point of balance,
: <math>\begin{align}
  \frac{R_2}{R_1} &= \frac{R_x}{R_3} \\[4pt]
  \Rightarrow R_x &= \frac{R_2}{R_1} \cdot R_3
\end{align}</math>

Detecting zero current with a [[galvanometer]] can be done to extremely high precision. Therefore, if {{math|''R''<sub>1</sub>}}, {{math|''R''<sub>2</sub>}}, and {{math|''R''<sub>3</sub>}} are known to high precision, then {{math|''R<sub>x</sub>''}} can be measured to high precision. Very small changes in {{math|''R<sub>x</sub>''}} disrupt the balance and are readily detected.

Alternatively, if {{math|''R''<sub>1</sub>}}, {{math|''R''<sub>2</sub>}}, and {{math|''R''<sub>3</sub>}} are known, but {{math|''R''<sub>2</sub>}} is not adjustable, the voltage difference across or current flow through the meter can be used to calculate the value of {{math|''R<sub>x</sub>''}}, using [[Kirchhoff's circuit laws]]. This setup is frequently used in [[strain gauge]] and [[resistance thermometer]] measurements, as it is usually faster to read a voltage level off a meter than to adjust a resistance to zero the voltage.

== Derivation ==
[[File:Wheatstonebridge current.svg|thumb|300px|Directions of currents arbitrarily assigned]]

=== Quick derivation at balance ===
At the point of balance, both the [[voltage]] and the [[Electric current|current]] between the two midpoints (B and D) are zero. Therefore, {{math|1=''I''<sub>1</sub> = ''I''<sub>2</sub>}}, {{math|1=''I''<sub>3</sub> = ''I''<sub>''x''</sub>}}, {{math|1=''V''<sub>D</sub> = ''V''<sub>B</sub>}}.

Because of {{math|1=''V''<sub>D</sub> = ''V''<sub>B</sub>}}, then {{math|1=''V''<sub>DC</sub> = ''V''<sub>BC</sub>}} and {{math|1=''V''<sub>AD</sub> = ''V''<sub>AB</sub>}}.

Dividing the last two equations by members and using the above currents equalities, then
: <math>\begin{align}
  \frac{V_{DC}}{V_{AD}}&=\frac{V_{BC}}{V_{AB}} \\[4pt]
 \Rightarrow \frac{I_2R_2}{I_1R_1} &= \frac{I_xR_x}{I_3R_3}\\[4pt]
  \Rightarrow R_x &= \frac{R_2}{R_1} \cdot R_3
\end{align}</math>

=== Alternative Derivation at Balance using Voltage Divider Expressions ===
ADC and ABC form two [[voltage divider]]s, with <math> V_G </math> equal to the difference in output voltages. Thus
: <math>\begin{align}
V_{DC} &= V_{BC} \\
I_2 R_2 &= I_x R_x \\
V_{AC} \frac{R_2}{R_1 + R_2} &= V_{AC} \frac{R_x}{R_3 + R_x} \\
\frac{R_2}{R_1 + R_2} &= \frac{R_x}{R_3 + R_x} \\
\frac{R_1 + R_2}{R_2} &= \frac{R_3 + R_x}{R_x} \\
1 + \frac{R_1}{R_2} &= 1 + \frac{R_3}{R_x} \\
\frac{R_1}{R_2} &= \frac{R_3}{R_x} \\
\end{align}</math>

=== Full derivation using Kirchhoff's circuit laws ===
First, [[Kirchoff's first law|Kirchhoff's first law]] is used to find the currents in junctions B and D:
: <math>\begin{align}
  I_3 - I_x + I_G &= 0 \\
  I_1 - I_2 - I_G &= 0
\end{align}</math>

Then, [[Kirchhoff's circuit laws#Kirchhoff's voltage law (KVL)|Kirchhoff's second law]] is used for finding the voltage in the loops ABDA and BCDB:
: <math>\begin{align}
  (I_3 \cdot R_3) - (I_G \cdot R_G) - (I_1 \cdot R_1) &= 0 \\
  (I_x \cdot R_x) - (I_2 \cdot R_2) + (I_G \cdot R_G) &= 0
\end{align}</math>

When the bridge is balanced, then {{math|''I''<sub>''G''</sub> {{=}} 0}}, so the second set of equations can be rewritten as:
: <math>\begin{align}
  I_3 \cdot R_3 &= I_1 \cdot R_1 \quad \text{(1)}  \\
  I_x \cdot R_x &= I_2 \cdot R_2 \quad \text{(2)}
\end{align}</math>

Then, equation (1) is divided by equation (2) and the resulting equation is rearranged, giving:
: <math>R_x = {{R_2 \cdot I_2 \cdot I_3 \cdot R_3}\over{R_1 \cdot I_1 \cdot I_x}}</math>

Due to {{math|1=''I''<sub>3</sub> = ''I''<sub>''x''</sub>}} and {{math|1=''I''<sub>1</sub> = ''I''<sub>2</sub>}} being proportional from Kirchhoff's First Law,  {{math|''I''<sub>3</sub>''I''<sub>2</sub>/''I''<sub>1</sub>''I''<sub>x</sub>}} cancels out of the above equation.  The desired value of {{math|''R''<sub>''x''</sub>}} is now known to be given as:
: <math>R_x = {{R_3 \cdot R_2}\over{R_1}}</math>

On the other hand, if the resistance of the galvanometer is high enough that {{math|''I''<sub>''G''</sub>}} is negligible, it is possible to compute {{math|''R''<sub>''x''</sub>}} from the three other resistor values and the supply voltage ({{math|''V''<sub>''S''</sub>}}), or the supply voltage from all four resistor values. To do so, one has to work out the voltage from each [[potential divider]] and subtract one from the other. The equations for this are:
: <math>
\begin{align}
V_G & = \left({R_2\over{R_1 + R_2}} - {R_x \over {R_x + R_3}}\right)V_s \\[6pt]
R_x & = {{R_2 \cdot V_s - (R_1+R_2) \cdot V_G}\over {R_1 \cdot V_s + (R_1+R_2) \cdot V_G}} R_3
\end{align}
</math>
where {{math|''V''<sub>''G''</sub>}} is the voltage of node D relative to node B.

== Significance ==
The Wheatstone bridge illustrates the concept of a difference measurement, which can be extremely accurate. Variations on the Wheatstone bridge can  be used to measure [[capacitance]], [[inductance]], [[Electrical impedance|impedance]] and other quantities, such as the amount of combustible gases in a sample, with an [[explosimeter]].  The [[Kelvin bridge]] was specially adapted from the Wheatstone bridge for measuring very low resistances.  In many cases, the significance of measuring the unknown resistance is related to measuring the impact of some [[physical phenomenon]] (such as force, temperature, pressure, etc.) which thereby allows the use of Wheatstone bridge in measuring those elements indirectly.

The concept was extended to [[alternating current]] measurements by [[James Clerk Maxwell]] in 1865<ref>{{cite journal |last1=Maxwell |first1=J. Clerk |title=A dynamical theory of the electromagnetic field |journal=Philosophical Transactions of the Royal Society of London |date=1865 |volume=155 |pages=459–512 |bibcode=1865RSPT..155..459M |url=https://archive.org/details/dynamicaltheoryo00maxw/page/458/mode/2up}}  Maxwell's bridge used a battery and a [[ballistic galvanometer]].  See pp. 475–477.</ref> and further improved as {{vanchor|Blumlein bridge}} by [[Alan Blumlein]] in British Patent no. 323,037, 1928.

== Modifications of the basic bridge ==
[[File:Kelvin bridge by RFT.png|right|thumb|300px|[[Kelvin bridge]]]]
The Wheatstone bridge is the fundamental bridge, but there are other modifications that can be made to measure various kinds of resistances when the fundamental Wheatstone bridge is not suitable. Some of the modifications are:
* [[Carey Foster bridge]], for measuring small resistances
* [[Kelvin bridge]], for measuring small [[Four-terminal sensing|four-terminal]] resistances
* [[Maxwell bridge]], and [[Wien bridge]] for measuring [[Electrical reactance|reactive]] components
* [[Anderson's bridge]], for measuring the self-inductance of the circuit, an advanced form of Maxwell's bridge

== See also ==
{{Portal|Electronics}}
* [[Diode bridge]], [[frequency mixer|product mixer]] – diode bridges
* [[Phantom circuit]] – a circuit using a balanced bridge
* [[Post office box (electricity)]]
* [[Potentiometer (measuring instrument)]]
* [[Potential divider]]
* [[Ohmmeter]]
* [[Resistance thermometer]]
* [[Strain gauge]]

== References ==
{{reflist}}

== External links ==
* {{Commons category inline|Wheatstone's bridge}}
* [http://www.ibiblio.org/kuphaldt/electricCircuits/DC/DC_8.html ''DC Metering Circuits''] chapter from [http://www.ibiblio.org/kuphaldt/electricCircuits/DC/index.html ''Lessons In Electric Circuits Vol 1 DC''] free ebook and [http://www.ibiblio.org/kuphaldt/electricCircuits/ ''Lessons In Electric Circuits''] series.
* [http://radionerds.com/index.php/I-49 Test Set I-49]

{{Bridge circuits}}
{{Authority control}}

{{DEFAULTSORT:Wheatstone Bridge}}
[[Category:Electrical meters]]
[[Category:Bridge circuits]]
[[Category:Measuring instruments]]
[[Category:English inventions]]
[[Category:Impedance measurements]]

[[pl:Mostek (elektronika)#Mostek Wheatstone'a]]