Editing Windsock

{{Short description|Meteorological instrument for wind speed and direction}}
{{Distinguish|Winsock|Air sock}}
{{Infobox tool
| name = Windsock
| caption = Windsock in [[Freiburg im Breisgau]], Germany
| image = Freiburg im Breisgau - Flugplatz - Windsack.jpg
| other_name = 
| classification = Meteorological instrument
| uses = Indicates wind direction and estimates its speed.
| types = 
| used_with = 
| related = [[Anemometer]], [[weather vane]], [[anemoscope]]
}}
A '''windsock''' (also known as '''wind cone''' or '''wind sleeve''') is a [[Cone (geometry)|conical]] textile tube that resembles a giant [[sock]]. It can be used as a basic indicator of [[wind speed]] and [[wind direction|direction]], or as decoration. Windsocks are typically used at airports to show the direction and strength of the wind to pilots, and at chemical plants where there is risk of gaseous leakage. They are also sometimes located alongside highways at windy locations.

At many airports, windsocks are externally or internally lit at night.<ref name="FAA1">{{Citation| publication-date = 2 June 2004|date=2 June 2004| title = ACP 125(F), FAA Advisory Circular 150/5345-27D (PDF 447KB)| publisher = Federal Aviation Administration| url = http://www.faa.gov/documentLibrary/media/advisory_circular/150-5345-27D/150_5345_27d.pdf| access-date =2017-01-07}}</ref> [[Wind direction]] is opposite the direction in which the windsock is pointing.{{efn|Wind directions are conventionally specified as the [[points of the compass|compass point]] from which the wind originates, so a windsock pointing due North indicates a southerly wind.}} Wind speed is indicated by the windsock's angle relative to the mounting pole{{px2}}{{mdash}}{{hsp}}in low winds it droops; in high winds, it flies horizontally.

== Design ==

Alternating stripes of high-visibility orange and white were initially used to help estimate wind speed, with each stripe extended adding 3 [[Knot (unit)|knots]] (5.6{{nbsp}}km/h; 3.5{{nbsp}}mph) to the estimated speed. Some circular frame mountings cause windsocks to be held open at one end and the first stripe extended, indicating a velocity of 3 knots even when stripes are not present. A fully extended windsock suggests a wind speed of {{convert|15|kn}} or greater.<ref>{{Cite web|url=http://www.piggottsflagsandbranding.co.uk/updates/interesting-facts-industrial-windsocks/|title=Windsocks facts|website=Piggotts Flags And Branding|access-date=2017-02-28|archive-url=https://web.archive.org/web/20170301041930/http://www.piggottsflagsandbranding.co.uk/updates/interesting-facts-industrial-windsocks/ |archive-date=2017-03-01}}</ref>

=== Standards ===
Per [[Federal Aviation Administration|FAA]] standards, a properly functioning windsock orients itself to a breeze of at least {{convert|3|kn}} and fully extends in a wind of {{convert|15|kn}}.<ref name="FAA1"/>

Per [[Transport Canada]] standards, a 15-knot wind fully extends the windsock; a {{convert|10|kn|adj=on}} wind raises it to 5° below the horizontal; and a {{convert|6|kn|adj=on}} wind raises it to 30° below the horizontal.<ref>{{Citation| publication-date = 25 March 2021| title = Transport Canada Aeronautical Information Manual (TC AIM) - Aerodromes (AGA) §5.9 Wind Direction Indicators | publisher = Transport Canada| url = https://tc.canada.ca/en/aviation/publications/transport-canada-aeronautical-information-manual-tc-aim-tp-14371| access-date =2021-04-04 }}</ref>

[[International Civil Aviation Organization|ICAO]] standards specify a truncated cone-shaped windsock at least {{convert|3.6|m|ft}} long and {{convert|0.9|m|ft|0}} in diameter at the large end. It should be readable from an altitude of {{convert|300|m|ft}} and ideally be of a single colour. If it is necessary to use two colours, they should ideally be orange and white, arranged in five alternating bands, with the first and last darker in tone. In wind speeds of {{convert|3|kn}} or more, they must indicate wind direction to within ±5°.<ref>{{Citation| publication-date = July 2013| title = Annex 14 to the Convention on International Civil Aviation - Aerodromes, Volume 1 §5.1.1 Wind Direction Indicator | publisher = International Civil Aviation Organization }}</ref>

== Other related wind direction indicators ==
{{anchor|wind tee|wind tetrahedron}}
[[File:Airfield wind direction indicators.png|thumb|right|Other wind direction indicators include wind tees and wind tetrahedrons.]]

'''Wind tees''' and '''wind [[tetrahedron]]s''' are two other commonly used wind direction indicators in airports. Wind tees are shaped like an airplane so that they match with the heading of an aircraft ready to take off and land. Wind tetrahedrons always have their pointed ends pointing to the wind. Wind tees and tetrahedrons can swing freely and align themselves with the wind direction, but neither provides an indication of wind speed, unlike a windsock. Since a wind tee or tetrahedron can also be manually set to align with the runway in use, a pilot should also look at the wind sock for wind information, if one is available.<ref>{{Cite PHAK|year=2023|chapter=14|page=20}} {{PD-notice}}</ref>

==See also==
*[[Anemoscope]]  – meteorological device for measuring wind direction
*[[Anemometer]] – meteorological device for measuring wind speed 
*[[Draco (military standard)]] – military standard carried by the Roman cavalry
*''[[Koinobori]]'' – Japanese decorative carp-shaped windsocks
*[[Traffic pattern indicator]], which may include a windsock at its center

== Notes ==
{{Notelist}}

== References ==
{{Commons category|Windsocks}}
{{Reflist}}

{{Meteorological equipment}}
{{Authority control}}

[[Category:Airport infrastructure]]
[[Category:Meteorological instrumentation and equipment]]
[[Category:Socks]]