Splitting field

Revision as of 04:25, 19 May 2025 by imported>Beland (custom spacing in math formulas (via WP:JWB))
(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)

Template:Short description Template:About In abstract algebra, a splitting field of a polynomial with coefficients in a field is the smallest field extension of that field over which the polynomial splits, i.e., decomposes into linear factors.

DefinitionEdit

A splitting field of a polynomial p(X) over a field K is a field extension L of K over which p factors into linear factors

<math>p(X) = c \prod_{i=1}^{\deg p} (X - a_i)</math>

where <math>c \in K</math> and for each <math>i</math> we have <math>X - a_i \in L[X]</math> with ai not necessarily distinct and such that the roots ai generate L over K. The extension L is then an extension of minimal degree over K in which p splits. It can be shown that such splitting fields exist and are unique up to isomorphism. The amount of freedom in that isomorphism is known as the Galois group of p (if we assume it is separable).

A splitting field of a set P of polynomials is the smallest field over which each of the polynomials in P splits.

PropertiesEdit

An extension L that is a splitting field for a set of polynomials p(X) over K is called a normal extension of K.

Given an algebraically closed field A containing K, there is a unique splitting field L of p between K and A, generated by the roots of p. If K is a subfield of the complex numbers, the existence is immediate. On the other hand, the existence of algebraic closures in general is often proved by 'passing to the limit' from the splitting field result, which therefore requires an independent proof to avoid circular reasoning.

Given a separable extension K′ of K, a Galois closure L of K′ is a type of splitting field, and also a Galois extension of K containing K′ that is minimal, in an obvious sense. Such a Galois closure should contain a splitting field for all the polynomials p over K that are minimal polynomials over K of elements of K′.

Constructing splitting fieldsEdit

MotivationEdit

Finding roots of polynomials has been an important problem since the time of the ancient Greeks. Some polynomials, however, such as Template:Math over Template:Math, the real numbers, have no roots. By constructing the splitting field for such a polynomial one can find the roots of the polynomial in the new field.

The constructionEdit

Let F be a field and p(X) be a polynomial in the polynomial ring F[X] of degree n. The general process for constructing K, the splitting field of p(X) over F, is to construct a chain of fields <math>F=K_0 \subseteq K_1 \subseteq \cdots \subseteq K_{r-1} \subseteq K_r=K</math> such that Ki is an extension of Ki−1 containing a new root of p(X). Since p(X) has at most n roots the construction will require at most n extensions. The steps for constructing Ki are given as follows:

  • Factorize p(X) over Ki into irreducible factors <math>f_1(X)f_2(X) \cdots f_k(X)</math>.
  • Choose any nonlinear irreducible factor f(X).
  • Construct the field extension Ki+1 of Ki as the quotient ring Ki+1 = Ki[X] / (f(X)) where (f(X)) denotes the ideal in Ki[X] generated by f(X).
  • Repeat the process for Ki+1 until p(X) completely factors.

The irreducible factor f(X) used in the quotient construction may be chosen arbitrarily. Although different choices of factors may lead to different subfield sequences, the resulting splitting fields will be isomorphic.

Since f(X) is irreducible, (f(X)) is a maximal ideal of Ki[X] and Ki[X] / (f(X)) is, in fact, a field, the residue field for that maximal ideal. Moreover, if we let <math>\pi : K_i[X] \to K_i[X]/(f(X))</math> be the natural projection of the ring onto its quotient then

<math>f(\pi(X)) = \pi(f(X)) = f(X)\ \bmod\ f(X) = 0</math>

so π(X) is a root of f(X) and of p(X).

The degree of a single extension <math>[K_{i+1} : K_i]</math> is equal to the degree of the irreducible factor f(X). The degree of the extension [K : F] is given by <math>[K_r : K_{r-1}] \cdots [K_2 : K_1] [K_1 : F]</math> and is at most n!.

The field Ki[X]/(f(X))Edit

As mentioned above, the quotient ring Ki+1 = Ki[X]/(f(X)) is a field when f(X) is irreducible. Its elements are of the form

<math>c_{n-1}\alpha^{n-1} + c_{n-2}\alpha^{n-2} + \cdots + c_1\alpha + c_0</math>

where the cj are in Ki and α = π(X). (If one considers Ki+1 as a vector space over Ki then the powers αj for Template:Nowrap form a basis.)

The elements of Ki+1 can be considered as polynomials in α of degree less than n. Addition in Ki+1 is given by the rules for polynomial addition, and multiplication is given by polynomial multiplication modulo f(X). That is, for g(α) and h(α) in Ki+1 their product is g(α)h(α) = r(α) where r(X) is the remainder of g(X)h(X) when divided by f(X) in Ki[X].

The remainder r(X) can be computed through polynomial long division; however there is also a straightforward reduction rule that can be used to compute r(α) = g(α)h(α) directly. First let

<math>f(X) = X^n + b_{n-1} X^{n-1} + \cdots + b_1 X + b_0.</math>

The polynomial is over a field so one can take f(X) to be monic without loss of generality. Now α is a root of f(X), so

<math>\alpha^n = -(b_{n-1} \alpha^{n-1} + \cdots + b_1 \alpha + b_0).</math>

If the product g(α)h(α) has a term αm with Template:Nowrap it can be reduced as follows:

<math>\alpha^n\alpha^{m-n} = -(b_{n-1} \alpha^{n-1} + \cdots + b_1 \alpha + b_0) \alpha^{m-n} = -(b_{n-1} \alpha^{m-1} + \cdots + b_1 \alpha^{m-n+1} + b_0 \alpha^{m-n})</math>.

As an example of the reduction rule, take Ki = Q[X], the ring of polynomials with rational coefficients, and take f(X) = X 7 − 2. Let <math>g(\alpha) = \alpha^5 + \alpha^2</math> and h(α) = α3 +1 be two elements of Q[X]/(X 7 − 2). The reduction rule given by f(X) is α7 = 2 so

<math>g(\alpha)h(\alpha) = (\alpha^5 + \alpha^2)(\alpha^3 + 1) = \alpha^8 + 2 \alpha^5 + \alpha^2 = (\alpha^7)\alpha + 2\alpha^5 + \alpha^2 = 2 \alpha^5 + \alpha^2 + 2\alpha.</math>

ExamplesEdit

The complex numbersEdit

Consider the polynomial ring R[x], and the irreducible polynomial Template:Nowrap The quotient ring Template:Nowrap is given by the congruence Template:Nowrap As a result, the elements (or equivalence classes) of Template:Nowrap are of the form Template:Nowrap where a and b belong to R. To see this, note that since Template:Nowrap it follows that Template:Nowrap, Template:Nowrap, Template:Nowrap, etc.; and so, for example Template:Nowrap

The addition and multiplication operations are given by firstly using ordinary polynomial addition and multiplication, but then reducing modulo Template:Nowrap, i.e. using the fact that Template:Nowrap, Template:Nowrap, Template:Nowrap, Template:Nowrap, etc. Thus:

<math>(a_1 + b_1x) + (a_2 + b_2x) = (a_1 + a_2) + (b_1 + b_2)x, </math>
<math>(a_1 + b_1x)(a_2 + b_2x) = a_1a_2 + (a_1b_2 + b_1a_2)x + (b_1b_2)x^2 \equiv (a_1a_2 - b_1b_2) + (a_1b_2 + b_1a_2)x \, . </math>

If we identify Template:Nowrap with (a,b) then we see that addition and multiplication are given by

<math>(a_1,b_1) + (a_2,b_2) = (a_1 + a_2,b_1 + b_2), </math>
<math>(a_1,b_1)\cdot (a_2,b_2) = (a_1a_2 - b_1b_2,a_1b_2 + b_1a_2). </math>

We claim that, as a field, the quotient ring Template:Nowrap is isomorphic to the complex numbers, C. A general complex number is of the form Template:Nowrap, where a and b are real numbers and Template:Nowrap Addition and multiplication are given by

<math>(a_1 + b_1 i) + (a_2 + b_2 i) = (a_1 + a_2) + i(b_1 + b_2),</math>
<math>(a_1 + b_1 i) \cdot (a_2 + b_2 i) = (a_1a_2 - b_1b_2) + i(a_1b_2 + a_2b_1).</math>

If we identify Template:Nowrap with (a, b) then we see that addition and multiplication are given by

<math>(a_1,b_1) + (a_2,b_2) = (a_1 + a_2,b_1 + b_2),</math>
<math>(a_1,b_1)\cdot (a_2,b_2) = (a_1a_2 - b_1b_2,a_1b_2 + b_1a_2).</math>

The previous calculations show that addition and multiplication behave the same way in Template:Nowrap and C. In fact, we see that the map between Template:Nowrap and C given by Template:Nowrap is a homomorphism with respect to addition and multiplication. It is also obvious that the map Template:Nowrap is both injective and surjective; meaning that Template:Nowrap is a bijective homomorphism, i.e., an isomorphism. It follows that, as claimed: Template:Nowrap

In 1847, Cauchy used this approach to define the complex numbers.<ref>Template:Citation</ref>

Cubic exampleEdit

Let Template:Mvar be the rational number field Template:Math and Template:Math. Each root of Template:Mvar equals Template:Math times a cube root of unity. Therefore, if we denote the cube roots of unity by

<math>\omega_1 = 1,\,</math>
<math>\omega_2 = -\frac{1}{2} + \frac{\sqrt{3}}{2} i,</math>
<math>\omega_3 = -\frac{1}{2} - \frac{\sqrt{3}}{2} i.</math>

any field containing two distinct roots of Template:Mvar will contain the quotient between two distinct cube roots of unity. Such a quotient is a primitive cube root of unity—either <math>\omega_2</math> or <math>\omega_3=1/\omega_2</math>. It follows that a splitting field Template:Mvar of Template:Mvar will contain ω2, as well as the real cube root of 2; conversely, any extension of Template:Math containing these elements contains all the roots of Template:Mvar. Thus

<math>L = \mathbf{Q}(\sqrt[3]{2}, \omega_2) = \{ a + b\sqrt[3]{2} + c{\sqrt[3]{2}}^2 + d\omega_2 + e\sqrt[3]{2}\omega_2 + f{\sqrt[3]{2}}^2 \omega_2 \mid a,b,c,d,e,f \in \mathbf{Q} \}</math>

Note that applying the construction process outlined in the previous section to this example, one begins with <math>K_0 = \mathbf{Q}</math> and constructs the field <math>K_1 = \mathbf{Q}[X] / (X^3 - 2)</math>. This field is not the splitting field, but contains one (any) root. However, the polynomial <math>Y^3 - 2</math> is not irreducible over <math>K_1</math> and in fact:

<math>Y^3 -2 = (Y - X)(Y^2 + XY + X^2).</math>

Note that <math>X</math> is not an indeterminate, and is in fact an element of <math>K_1</math>. Now, continuing the process, we obtain <math>K_2 = K_1[Y] / (Y^2 + XY + X^2)</math>, which is indeed the splitting field and is spanned by the <math>\mathbf{Q}</math>-basis <math>\{1, X, X^2, Y, XY, X^2 Y\}</math>. Notice that if we compare this with <math>L</math> from above we can identify <math>X = \sqrt[3]{2}</math> and <math>Y = \omega_2</math>.

Other examplesEdit

  • The splitting field of xqx over Fp is the unique finite field Fq for q = pn.<ref>Template:Cite book</ref> Sometimes this field is denoted by GF(q).
  • The splitting field of x2 + 1 over F7 is F49; the polynomial has no roots in F7, i.e., −1 is not a square there, because 7 is not congruent to 1 modulo 4.<ref>Instead of applying this characterization of odd prime moduli for which −1 is a square, one could just check that the set of squares in F7 is the set of classes of 0, 1, 4, and 2, which does not include the class of −1 ≡ 6.</ref>
  • The splitting field of x2 − 1 over F7 is F7 since x2 − 1 = (x + 1)(x − 1) already splits into linear factors.
  • We calculate the splitting field of f(x) = x3 + x + 1 over F2. It is easy to verify that f(x) has no roots in F2; hence f(x) is irreducible in F2[x]. Put r = x + (f(x)) in F2[x]/(f(x)) so F2(r) is a field and x3 + x + 1 = (x + r)(x2 + ax + b) in F2(r)[x]. Note that we can write + for − since the characteristic is two. Comparing coefficients shows that a = r and b = 1 + r 2. The elements of F2(r) can be listed as c + dr + er 2, where c, d, e are in F2. There are eight elements: 0, 1, r, 1 + r, r 2, 1 + r 2, r + r 2 and 1 + r + r 2. Substituting these in x2 + rx + 1 + r 2 we reach (r 2)2 + r(r 2) + 1 + r 2 = r 4 + r 3 + 1 + r 2 = 0, therefore x3 + x + 1 = (x + r)(x + r 2)(x + (r + r 2)) for r in F2[x]/(f(x)); E = F2(r) is a splitting field of x3 + x + 1 over F2.

NotesEdit

<references />

ReferencesEdit

  • Dummit, David S., and Foote, Richard M. (1999). Abstract Algebra (2nd ed.). New York: John Wiley & Sons, Inc. Template:Isbn.
  • Template:Springer
  • {{#invoke:Template wrapper|{{#if:|list|wrap}}|_template=cite web

|_exclude=urlname, _debug, id |url = https://mathworld.wolfram.com/{{#if:SplittingField%7CSplittingField.html}} |title = Splitting field |author = Weisstein, Eric W. |website = MathWorld |access-date = |ref = Template:SfnRef }}