Pipe bomb

Revision as of 02:41, 19 April 2025 by imported>Graham87 (→‎Notable incidents: remove item ... out of chronological order, has an extra comma, not mentioned in linked article, tagged with a citation needed tag since November last year)
(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)

Template:Short description Template:Pp Template:For multi Template:Use dmy dates

File:Trip-wire pipe bomb.jpg
A tripwire-triggered pipe bomb mock-up used to train US military service personnel

A pipe bomb is an improvised explosive device (IED) that uses a tightly sealed section of pipe filled with an explosive material. The containment provided by the pipe means that simple low explosives can be used to produce a relatively large explosion due to the containment causing increased pressure. The fragmentation of the pipe itself creates potentially lethal shrapnel.

Premature detonation is a hazard of attempting to construct any homemade bomb. The materials and methods used with pipe bombs often result in unintentional detonation, usually resulting in serious injury or death to the assembler.

In many countries, the manufacture or possession of a pipe bomb is a serious crime, regardless of its intended use.

DesignEdit

File:Pipe bomb 02.jpg
Different pipe bombs' appearances, from a bomb awareness report issued by the US Department of State

The bomb is usually a short section of steel water pipe containing the explosive mixture and closed at both ends with steel or brass caps. A fuse is inserted into the pipe with a lead running out through a hole in the side or capped end of the pipe. The fuse can be electric, with wires leading to a timer and battery, or can be a common fuse. All of the components are easily obtainable.

Generally, high explosives such as trinitrotoluene are not used, because these and the detonators that they require are difficult for non-state users to obtain. Such explosives also do not require the containment design of a pipe bomb.

Instead, explosive mixtures that the builder can more readily obtain themselves are used, such as gunpowder, match heads, or chlorate mixtures. These can be easily ignited by friction, static electricity, and sparks generated when packing the material inside the tube or attaching the end caps, causing many injuries or deaths amongst builders.<ref>Template:Cite book</ref>

Sharp objects such as nails or broken glass are sometimes added to the outer shell or inside of the bomb to increase the lethality of the device.

OperationEdit

Pipe bombs concentrate pressure and release it suddenly, through the failure of the outer casing. Plastic materials can be used, but metals typically have a much higher bursting strength and so will produce more concussive force. For example, common schedule 40 Template:Convert wrought steel pipe has a typical working pressure of Template:Convert, and bursting pressure of Template:Convert,<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> though the pipe sealing method can significantly reduce the burst pressure.

The pipe can rupture in different ways, depending on the rate of pressure rise and the ductility of the casing material.

  • If the pressure rise is slow, the metal can deform until the walls become thin and a hole is formed, causing a loud report from the gas release, but no shrapnel.
  • A rapid rate of pressure rise will cause the metal to shatter into fragments, which are pushed outward in all directions by the expanding gases.

Modes of failureEdit

Pipe bombs can fail to explode if the gas pressure buildup is too slow, resulting in bleed-out through the detonator ignition hole. Insufficiently tight threading can also bleed gas pressure through the threads faster than the chemical reaction pressure can rise.

They can also fail if the pipe is fully sealed and the chemical reaction triggered, but the total pressure buildup from the chemicals is insufficient to exceed the casing strength; such a bomb inevitably fails to trigger, but is still potentially dangerous if handled, since an external shock could trigger rupture of the statically pressurized casing.

Minimum evacuation distancesEdit

If any type of bomb is suspected, typical recommendations are to keep all people at a minimum evacuation distance until authorized bomb disposal personnel arrive. For a pipe bomb, the US Department of Homeland Security recommends a minimum of Template:Convert, and an outdoors distance of Template:Convert.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

UsesEdit

Pipe bombs are by nature improvised weapons and typically used by those without access to military devices such as grenades. They were successfully used in the Spanish Civil War (1936–1939). During World War II, members of the British Home Guard were trained to make and use them.<ref name="McCutcheon2012">Template:Cite book</ref>

In Northern Ireland, there have been hundreds of pipe bomb attacks since the mid-1990s as the Troubles came to an end. Most of the attacks have been launched by loyalist paramilitaries, especially the Red Hand Defenders, Orange Volunteers and Ulster Defence Association.<ref>Template:Cite book</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> However, they have also been used by Irish republican paramilitaries and by anti-drugs vigilante group Republican Action Against Drugs. They are also used extensively in the south of Ireland by feuding criminals, including drug dealers, mainly in the capital city of Dublin.

As well as users such as criminals, paramilitaries, and militias, they also have a long tradition of recreational use for amusement or mischief with no intention to cause injury to anyone, but due to the dangers of premature ignition and of shrapnel, pipe bombs are much more dangerous than alternatives, such as dry ice bombs or potato cannons.

Notable incidentsEdit

File:HaymarketRiot-Harpers.jpg
CitationClass=web }}</ref>

|CitationClass=web }}</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

See alsoEdit

ReferencesEdit

Template:Reflist

  • {{#if:5386758

|[{{#ifeq:|uspto|http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=%7Chttps://patents.google.com/patent/US}}{{#iferror:{{#expr:5386758 }}|5386758}} US5,386,758] |{{US patent|123456|link text}}}}–Apparatus and method for disarming pipe bombs