In mathematics, a homothety (or homothecy, or homogeneous dilation) is a transformation of an affine space determined by a point Template:Mvar called its center and a nonzero number Template:Mvar called its ratio, which sends point Template:Mvar to a point Template:Mvar by the rule,Template:Sfnp
- <math>\overrightarrow{SX'}=k\overrightarrow{SX}</math> for a fixed number <math>k\ne 0</math>.
Using position vectors:
- <math>\mathbf x'=\mathbf s + k(\mathbf x -\mathbf s)</math>.
In case of <math>S=O</math> (Origin):
- <math>\mathbf x'=k\mathbf x</math>,
which is a uniform scaling and shows the meaning of special choices for <math>k</math>:
- for <math>k=1</math> one gets the identity mapping,
- for <math>k=-1</math> one gets the reflection at the center,
For <math>1/k</math> one gets the inverse mapping defined by <math>k</math>.
In Euclidean geometry homotheties are the similarities that fix a point and either preserve (if <math>k>0</math>) or reverse (if <math>k<0</math>) the direction of all vectors. Together with the translations, all homotheties of an affine (or Euclidean) space form a group, the group of dilations or homothety-translations. These are precisely the affine transformations with the property that the image of every line g is a line parallel to g.
In projective geometry, a homothetic transformation is a similarity transformation (i.e., fixes a given elliptic involution) that leaves the line at infinity pointwise invariant.Template:Sfnp
In Euclidean geometry, a homothety of ratio <math>k</math> multiplies distances between points by <math>|k|</math>, areas by <math>k^2</math> and volumes by <math>|k|^3</math>. Here <math>k</math> is the ratio of magnification or dilation factor or scale factor or similitude ratio. Such a transformation can be called an enlargement if the scale factor exceeds 1. The above-mentioned fixed point S is called homothetic center or center of similarity or center of similitude.
The term, coined by French mathematician Michel Chasles, is derived from two Greek elements: the prefix Template:Transliteration ({{#invoke:Lang|lang}} Template:Gloss}; and Template:Translation ({{#invoke:Lang|lang}}) Template:Gloss). It describes the relationship between two figures of the same shape and orientation. For example, two Russian dolls looking in the same direction can be considered homothetic.
Homotheties are used to scale the contents of computer screens; for example, smartphones, notebooks, and laptops.
PropertiesEdit
The following properties hold in any dimension.
Mapping lines, line segments and anglesEdit
A homothety has the following properties:
- A line is mapped onto a parallel line. Hence: angles remain unchanged.
- The ratio of two line segments is preserved.
Both properties show:
- A homothety is a similarity.
Derivation of the properties: In order to make calculations easy it is assumed that the center <math>S</math> is the origin: <math>\mathbf x \to k\mathbf x</math>. A line <math>g</math> with parametric representation <math>\mathbf x=\mathbf p +t\mathbf v</math> is mapped onto the point set <math>g'</math> with equation <math>\mathbf x=k(\mathbf p+t\mathbf v)= k\mathbf p+tk\mathbf v</math>, which is a line parallel to <math>g</math>.
The distance of two points <math>P:\mathbf p,\;Q:\mathbf q</math> is <math>|\mathbf p -\mathbf q|</math> and <math>|k\mathbf p -k\mathbf q|=|k||\mathbf p-\mathbf q|</math> the distance between their images. Hence, the ratio (quotient) of two line segments remains unchanged.
In case of <math>S\ne O</math> the calculation is analogous but a little extensive.
Consequences: A triangle is mapped on a similar one. The homothetic image of a circle is a circle. The image of an ellipse is a similar one. i.e. the ratio of the two axes is unchanged.
Graphical constructionsEdit
using the intercept theoremEdit
If for a homothety with center <math>S</math> the image <math>Q_1</math> of a point <math>P_1</math> is given (see diagram) then the image <math>Q_2</math> of a second point <math>P_2</math>, which lies not on line <math>SP_1</math> can be constructed graphically using the intercept theorem: <math>Q_2</math> is the common point th two lines <math>\overline{P_1P_2}</math> and <math>\overline{SP_2}</math>. The image of a point collinear with <math>P_1,Q_1</math> can be determined using <math>P_2,Q_2</math>.
using a pantographEdit
Before computers became ubiquitous, scalings of drawings were done by using a pantograph, a tool similar to a compass.
Construction and geometrical background:
- Take 4 rods and assemble a mobile parallelogram with vertices <math>P_0,Q_0,H,P</math> such that the two rods meeting at <math>Q_0</math> are prolonged at the other end as shown in the diagram. Choose the ratio <math>k</math>.
- On the prolonged rods mark the two points <math>S,Q</math> such that <math>|SQ_0|=k|SP_0|</math> and <math>|QQ_0|=k|HQ_0|</math>. This is the case if <math>|SQ_0|=\tfrac{k}{k-1}|P_0Q_0|.</math> (Instead of <math>k</math> the location of the center <math>S</math> can be prescribed. In this case the ratio is <math>k=|SQ_0|/|SP_0|</math>.)
- Attach the mobile rods rotatable at point <math>S</math>.
- Vary the location of point <math>P</math> and mark at each time point <math>Q</math>.
Because of <math>|SQ_0|/|SP_0|=|Q_0Q|/|PP_0|</math> (see diagram) one gets from the intercept theorem that the points <math>S,P,Q</math> are collinear (lie on a line) and equation <math>|SQ|=k|SP|</math> holds. That shows: the mapping <math>P\to Q</math> is a homothety with center <math>S</math> and ratio <math>k</math>.
CompositionEdit
- The composition of two homotheties with the same center <math>S</math> is again a homothety with center <math>S</math>. The homotheties with center <math>S</math> form a group.
- The composition of two homotheties with different centers <math>S_1,S_2</math> and its ratios <math>k_1,k_2</math> is
- in case of <math>k_1k_2\ne 1</math> a homothety with its center on line <math>\overline{S_1S_2}</math> and ratio <math>k_1k_2</math> or
- in case of <math>k_1k_2= 1</math> a translation in direction <math>\overrightarrow{S_1S_2}</math>. Especially, if <math>k_1=k_2=-1</math> (point reflections).
Derivation:
For the composition <math>\sigma_2\sigma_1</math> of the two homotheties <math>\sigma_1,\sigma_2</math> with centers <math>S_1,S_2</math> with
- <math>\sigma_1: \mathbf x \to \mathbf s_1+k_1(\mathbf x -\mathbf s_1), </math>
- <math>\sigma_2: \mathbf x \to \mathbf s_2+k_2(\mathbf x -\mathbf s_2)\ </math>
one gets by calculation for the image of point <math>X:\mathbf x</math>:
- <math>(\sigma_2\sigma_1)(\mathbf x)= \mathbf s_2+k_2\big(\mathbf s_1+k_1(\mathbf x-\mathbf s_1)-\mathbf s_2\big) </math>
- <math>\qquad \qquad \ =(1-k_1)k_2\mathbf s_1+(1-k_2)\mathbf s_2 + k_1k_2\mathbf x</math>.
Hence, the composition is
- in case of <math>k_1k_2= 1</math> a translation in direction <math>\overrightarrow{S_1S_2}</math> by vector <math>\ (1-k_2)(\mathbf s_2-\mathbf s_1)</math>.
- in case of <math>k_1k_2\ne 1</math> point
- <math>S_3: \mathbf s_3=\frac{(1-k_1)k_2\mathbf s_1+(1-k_2)\mathbf s_2}{1-k_1k_2}
=\mathbf s_1+\frac{1-k_2}{1-k_1k_2}(\mathbf s_2-\mathbf s_1) </math> is a fixpoint (is not moved) and the composition
- <math>\sigma_2\sigma_1: \ \mathbf x \to \mathbf s_3 + k_1k_2(\mathbf x -\mathbf s_3)\quad </math>.
is a homothety with center <math>S_3</math> and ratio <math>k_1k_2</math>. <math>S_3</math> lies on line <math>\overline{S_1S_2}</math>.
- The composition of a homothety and a translation is a homothety.
Derivation:
The composition of the homothety
- <math>\sigma: \mathbf x \to \mathbf s +k(\mathbf x-\mathbf s),\; k\ne 1,\;</math> and the translation
- <math>\tau: \mathbf x \to \mathbf x +\mathbf v </math> is
- <math>\tau\sigma: \mathbf x \to \mathbf s +\mathbf v +k(\mathbf x-\mathbf s)</math>
- <math>=\mathbf s +\frac{\mathbf v}{1-k}+k\left(\mathbf x-(\mathbf s+\frac{\mathbf v}{1-k})\right)</math>
which is a homothety with center <math>\mathbf s'=\mathbf s +\frac{\mathbf v}{1-k}</math> and ratio <math>k</math>.
In homogeneous coordinatesEdit
The homothety <math>\sigma: \mathbf x \to \mathbf s+k(\mathbf x -\mathbf s)</math> with center <math>S=(u,v)</math> can be written as the composition of a homothety with center <math>O</math> and a translation:
- <math>\mathbf x \to k\mathbf x + (1-k)\mathbf s</math>.
Hence <math>\sigma</math> can be represented in homogeneous coordinates by the matrix:
- <math>\begin{pmatrix}
k & 0 & (1-k)u\\ 0 & k & (1-k)v\\ 0 & 0 & 1 \end{pmatrix} </math>
A pure homothety linear transformation is also conformal because it is composed of translation and uniform scale.
See alsoEdit
- Scaling (geometry) a similar notion in vector spaces
- Homothetic center, the center of a homothetic transformation taking one of a pair of shapes into the other
- The Hadwiger conjecture on the number of strictly smaller homothetic copies of a convex body that may be needed to cover it
- Homothetic function (economics), a function of the form Template:Math in which Template:Mvar is a homogeneous function and Template:Mvar is a monotonically increasing function.
NotesEdit
<references/>
ReferencesEdit
- Coxeter, H. S. M. (1961), "Introduction to geometry", Wiley, p. 94
- Template:Citation
- Template:Citation
- Template:Citation
External linksEdit
- Homothety, interactive applet from Cut-the-Knot.