Template:Short description Template:Redirect2 Template:Pp-semi-indef Template:Use dmy dates Template:Chembox Carbon dioxide is a chemical compound with the chemical formula Template:CO2. It is made up of molecules that each have one carbon atom covalently double bonded to two oxygen atoms. It is found in a gas state at room temperature and at normally-encountered concentrations it is odorless. As the source of carbon in the carbon cycle, atmospheric Template:CO2 is the primary carbon source for life on Earth. In the air, carbon dioxide is transparent to visible light but absorbs infrared radiation, acting as a greenhouse gas. Carbon dioxide is soluble in water and is found in groundwater, lakes, ice caps, and seawater.
It is a trace gas in Earth's atmosphere at 421 parts per million (ppm),Template:Efn or about 0.042% (as of May 2022) having risen from pre-industrial levels of 280 ppm or about 0.028%.<ref name="Cambridge2013">Template:Cite book</ref><ref name=noaa>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Burning fossil fuels is the main cause of these increased Template:CO2 concentrations, which are the primary cause of climate change.<ref name="AR6 WGIII Ch 13">IPCC (2022) Summary for policy makers in Climate Change 2022: Mitigation of Climate Change. Contribution of Working Group III to the Sixth Assessment Report of the Intergovernmental Panel on Climate Change, Cambridge University Press, Cambridge, United Kingdom and New York, NY, US</ref>
Its concentration in Earth's pre-industrial atmosphere since late in the Precambrian was regulated by organisms and geological features. Plants, algae and cyanobacteria use energy from sunlight to synthesize carbohydrates from carbon dioxide and water in a process called photosynthesis, which produces oxygen as a waste product.<ref>Template:Cite book</ref> In turn, oxygen is consumed and Template:CO2 is released as waste by all aerobic organisms when they metabolize organic compounds to produce energy by respiration.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Template:CO2 is released from organic materials when they decay or combust, such as in forest fires. When carbon dioxide dissolves in water, it forms carbonate and mainly bicarbonate (Template:Chem2), which causes ocean acidification as [[Carbon dioxide in Earth's atmosphere|atmospheric Template:CO2]] levels increase.<ref name="NRC2010">Template:Cite book</ref>
Carbon dioxide is 53% more dense than dry air, but is long lived and thoroughly mixes in the atmosphere. About half of excess Template:CO2 emissions to the atmosphere are absorbed by land and ocean carbon sinks.<ref>Template:Cite book</ref> These sinks can become saturated and are volatile, as decay and wildfires result in the Template:CO2 being released back into the atmosphere.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Template:CO2, or the carbon it holds, is eventually sequestered (stored for the long term) in rocks and organic deposits like coal, petroleum and natural gas.
Nearly all Template:CO2 produced by humans goes into the atmosphere. Less than 1% of Template:CO2 produced annually is put to commercial use, mostly in the fertilizer industry and in the oil and gas industry for enhanced oil recovery. Other commercial applications include food and beverage production, metal fabrication, cooling, fire suppression and stimulating plant growth in greenhouses.<ref name="IEA-2019-3">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>Template:RpTemplate:TOC limit
Chemical and physical propertiesEdit
Structure, bonding and molecular vibrationsEdit
Template:See also The symmetry of a carbon dioxide molecule is linear and centrosymmetric at its equilibrium geometry. The length of the carbon–oxygen bond in carbon dioxide is 116.3 pm, noticeably shorter than the roughly 140 pm length of a typical single C–O bond, and shorter than most other C–O multiply bonded functional groups such as carbonyls.<ref name=Green/> Since it is centrosymmetric, the molecule has no electric dipole moment.
As a linear triatomic molecule, Template:CO2 has four vibrational modes as shown in the diagram. In the symmetric and the antisymmetric stretching modes, the atoms move along the axis of the molecule. There are two bending modes, which are degenerate, meaning that they have the same frequency and same energy, because of the symmetry of the molecule. When a molecule touches a surface or touches another molecule, the two bending modes can differ in frequency because the interaction is different for the two modes. Some of the vibrational modes are observed in the infrared (IR) spectrum: the antisymmetric stretching mode at wavenumber 2349 cm−1 (wavelength 4.25 μm) and the degenerate pair of bending modes at 667 cm−1 (wavelength 15.0 μm). The symmetric stretching mode does not create an electric dipole so is not observed in IR spectroscopy, but it is detected in Raman spectroscopy at 1388 cm−1 (wavelength 7.20 μm), with a Fermi resonance doublet at 1285 cm−1.<ref>Template:Cite book</ref>
In the gas phase, carbon dioxide molecules undergo significant vibrational motions and do not keep a fixed structure. However, in a Coulomb explosion imaging experiment, an instantaneous image of the molecular structure can be deduced. Such an experiment<ref>Template:Cite journal</ref> has been performed for carbon dioxide. The result of this experiment, and the conclusion of theoretical calculations<ref name=Jensen2020>Template:Cite journal</ref> based on an ab initio potential energy surface of the molecule, is that none of the molecules in the gas phase are ever exactly linear. This counter-intuitive result is trivially due to the fact that the nuclear motion volume element vanishes for linear geometries.<ref name=Jensen2020/> This is so for all molecules except diatomic molecules.
In aqueous solutionEdit
Template:See also Carbon dioxide is soluble in water, in which it reversibly forms Template:Chem2 (carbonic acid), which is a weak acid, because its ionization in water is incomplete.
The hydration equilibrium constant of carbonic acid is, at 25 °C:
- <math chem>K_\mathrm{h} = \frac{\ce{[H2CO3]}}{\ce{[CO2_{(aq)}]}} = 1.70 \times 10^{-3}</math>
Hence, the majority of the carbon dioxide is not converted into carbonic acid, but remains as Template:CO2 molecules, not affecting the pH.
The relative concentrations of Template:CO2, Template:Chem2, and the deprotonated forms Template:Chem2 (bicarbonate) and Template:Chem2(carbonate) depend on the pH. As shown in a Bjerrum plot, in neutral or slightly alkaline water (pH > 6.5), the bicarbonate form predominates (>50%) becoming the most prevalent (>95%) at the pH of seawater. In very alkaline water (pH > 10.4), the predominant (>50%) form is carbonate. The oceans, being mildly alkaline with typical pH = 8.2–8.5, contain about 120 mg of bicarbonate per liter.
Being diprotic, carbonic acid has two acid dissociation constants, the first one for the dissociation into the bicarbonate (also called hydrogen carbonate) ion (Template:Chem2):
- Template:Chem2
- Ka1 = 2.5 × 10−4 mol/L; pKa1 = 3.6 at 25 °C.<ref name=Green>Template:Greenwood&Earnshaw2nd</ref>
This is the true first acid dissociation constant, defined as
- <math chem>K_\mathrm{a1} = \frac{\ce{[HCO3- ][H+]}}{\ce{[H2CO3]}}</math>
where the denominator includes only covalently bound Template:Chem2 and does not include hydrated Template:CO2(aq). The much smaller and often-quoted value near 4.16 × 10−7 (or pKa1 = 6.38) is an apparent value calculated on the (incorrect) assumption that all dissolved Template:CO2 is present as carbonic acid, so that
- <math chem>K_\mathrm{a1}{\rm{(apparent)}}=\frac{\ce{[HCO3- ][H+]}}{\ce{[H2CO3] + [CO2_{(aq)}]}}</math>
Since most of the dissolved Template:CO2 remains as Template:CO2 molecules, Ka1(apparent) has a much larger denominator and a much smaller value than the true Ka1.<ref>Template:Cite book</ref>
The bicarbonate ion is an amphoteric species that can act as an acid or as a base, depending on pH of the solution. At high pH, it dissociates significantly into the carbonate ion (Template:Chem2):
- Template:Chem2
- Ka2 = 4.69 × 10−11 mol/L; pKa2 = 10.329
In organisms, carbonic acid production is catalysed by the enzyme known as carbonic anhydrase.
In addition to altering its acidity, the presence of carbon dioxide in water also affects its electrical properties.
When carbon dioxide dissolves in desalinated water, the electrical conductivity increases significantly from below 1 μS/cm to nearly 30 μS/cm. When heated, the water begins to gradually lose the conductivity induced by the presence of <math> \mathrm{CO_{2}} </math> , especially noticeable as temperatures exceed 30 °C.
The temperature dependence of the electrical conductivity of fully deionized water without Template:CO2 saturation is comparably low in relation to these data.
Chemical reactionsEdit
Template:CO2 is a potent electrophile having an electrophilic reactivity that is comparable to benzaldehyde or strongly electrophilic α,β-unsaturated carbonyl compounds. However, unlike electrophiles of similar reactivity, the reactions of nucleophiles with Template:CO2 are thermodynamically less favored and are often found to be highly reversible.<ref>Template:Cite journal</ref> The reversible reaction of carbon dioxide with amines to make carbamates is used in Template:CO2 scrubbers and has been suggested as a possible starting point for carbon capture and storage by amine gas treating. Only very strong nucleophiles, like the carbanions provided by Grignard reagents and organolithium compounds react with Template:CO2 to give carboxylates:
In metal carbon dioxide complexes, Template:CO2 serves as a ligand, which can facilitate the conversion of Template:CO2 to other chemicals.<ref>Template:Cite book</ref>
The reduction of Template:CO2 to CO is ordinarily a difficult and slow reaction:
The redox potential for this reaction near pH 7 is about −0.53 V versus the standard hydrogen electrode. The nickel-containing enzyme carbon monoxide dehydrogenase catalyses this process.<ref>Template:Cite journal</ref>
Photoautotrophs (i.e. plants and cyanobacteria) use the energy contained in sunlight to photosynthesize simple sugars from Template:CO2 absorbed from the air and water:
Physical propertiesEdit
Carbon dioxide is colorless. At low concentrations, the gas is odorless; however, at sufficiently high concentrations, it has a sharp, acidic odor.<ref name=AirProductsMSDS>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> At standard temperature and pressure, the density of carbon dioxide is around 1.98 kg/m3, about 1.53 times that of air.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
Carbon dioxide has no liquid state at pressures below 0.51795(10) MPa<ref name = "Span_1999" /> (5.11177(99) atm). At a pressure of 1 atm (0.101325 MPa), the gas deposits directly to a solid at temperatures below 194.6855(30) K<ref name = "Span_1999" /> (−78.4645(30) °C) and the solid sublimes directly to a gas above this temperature. In its solid state, carbon dioxide is commonly called dry ice.
Liquid carbon dioxide forms only at pressures above 0.51795(10) MPa<ref name = "Span_1999" /> (5.11177(99) atm); the triple point of carbon dioxide is 216.592(3) K<ref name = "Span_1999" /> (−56.558(3) °C) at 0.51795(10) MPa<ref name = "Span_1999" /> (5.11177(99) atm) (see phase diagram). The critical point is 304.128(15) K<ref name = "Span_1999" /> (30.978(15) °C) at 7.3773(30) MPa<ref name = "Span_1999" /> (72.808(30) atm). Another form of solid carbon dioxide observed at high pressure is an amorphous glass-like solid.<ref>Template:Cite journal</ref> This form of glass, called carbonia, is produced by supercooling heated Template:CO2 at extreme pressures (40–48 GPa, or about 400,000 atmospheres) in a diamond anvil. This discovery confirmed the theory that carbon dioxide could exist in a glass state similar to other members of its elemental family, like silicon dioxide (silica glass) and germanium dioxide. Unlike silica and germania glasses, however, carbonia glass is not stable at normal pressures and reverts to gas when pressure is released.
At temperatures and pressures above the critical point, carbon dioxide behaves as a supercritical fluid known as supercritical carbon dioxide.
Table of thermal and physical properties of saturated liquid carbon dioxide:<ref name=Holman>Template:Cite book</ref><ref name=Incropera>Template:Cite book</ref>
| Temperature (°C) |
Density (kg/m3) |
Specific heat (kJ/(kg⋅K)) |
Kinematic viscosity (m2/s) |
Thermal conductivity (W/(m⋅K)) |
Thermal diffusivity (m2/s) |
Prandtl Number |
|---|---|---|---|---|---|---|
| −50 | 1156.34 | 1.84 | 1.19 × 10−7 | 0.0855 | 4.02 × 10−8 | 2.96 |
| −40 | 1117.77 | 1.88 | 1.18 × 10−7 | 0.1011 | 4.81 × 10−8 | 2.46 |
| −30 | 1076.76 | 1.97 | 1.17 × 10−7 | 0.1116 | 5.27 × 10−8 | 2.22 |
| −20 | 1032.39 | 2.05 | 1.15 × 10−7 | 0.1151 | 5.45 × 10−8 | 2.12 |
| −10 | 983.38 | 2.18 | 1.13 × 10−7 | 0.1099 | 5.13 × 10−8 | 2.2 |
| 0 | 926.99 | 2.47 | 1.08 × 10−7 | 0.1045 | 4.58 × 10−8 | 2.38 |
| 10 | 860.03 | 3.14 | 1.01 × 10−7 | 0.0971 | 3.61 × 10−8 | 2.8 |
| 20 | 772.57 | 5 | 9.10 × 10−8 | 0.0872 | 2.22 × 10−8 | 4.1 |
| 30 | 597.81 | 36.4 | 8.00 × 10−8 | 0.0703 | 0.279 × 10−8 | 28.7 |
Table of thermal and physical properties of carbon dioxide (Template:CO2) at atmospheric pressure:<ref name=Holman/><ref name=Incropera/>
| Temperature (K) |
Density (kg/m3) |
Specific heat (kJ/(kg⋅°C)) |
Dynamic viscosity (kg/(m⋅s)) |
Kinematic viscosity (m2/s) |
Thermal conductivity (W/(m⋅°C)) |
Thermal diffusivity (m2/s) |
Prandtl Number |
|---|---|---|---|---|---|---|---|
| 220 | 2.4733 | 0.783 | 1.11 × 10−5 | 4.49 × 10−6 | 0.010805 | 5.92 × 10−6 | 0.818 |
| 250 | 2.1657 | 0.804 | 1.26 × 10−5 | 5.81 × 10−6 | 0.012884 | 7.40 × 10−6 | 0.793 |
| 300 | 1.7973 | 0.871 | 1.50 × 10−5 | 8.32 × 10−6 | 0.016572 | 1.06 × 10−5 | 0.77 |
| 350 | 1.5362 | 0.9 | 1.72 × 10−5 | 1.12 × 10−5 | 0.02047 | 1.48 × 10−5 | 0.755 |
| 400 | 1.3424 | 0.942 | 1.93 × 10−5 | 1.44 × 10−5 | 0.02461 | 1.95 × 10−5 | 0.738 |
| 450 | 1.1918 | 0.98 | 2.13 × 10−5 | 1.79 × 10−5 | 0.02897 | 2.48 × 10−5 | 0.721 |
| 500 | 1.0732 | 1.013 | 2.33 × 10−5 | 2.17 × 10−5 | 0.03352 | 3.08 × 10−5 | 0.702 |
| 550 | 0.9739 | 1.047 | 2.51 × 10−5 | 2.57 × 10−5 | 0.03821 | 3.75 × 10−5 | 0.685 |
| 600 | 0.8938 | 1.076 | 2.68 × 10−5 | 3.00 × 10−5 | 0.04311 | 4.48 × 10−5 | 0.668 |
| 650 | 0.8143 | 1.1 | 2.88 × 10−5 | 3.54 × 10−5 | 0.0445 | 4.97 × 10−5 | 0.712 |
| 700 | 0.7564 | 1.13 | 3.05 × 10−5 | 4.03 × 10−5 | 0.0481 | 5.63 × 10−5 | 0.717 |
| 750 | 0.7057 | 1.15 | 3.21 × 10−5 | 4.55 × 10−5 | 0.0517 | 6.37 × 10−5 | 0.714 |
| 800 | 0.6614 | 1.17 | 3.37 × 10−5 | 5.10 × 10−5 | 0.0551 | 7.12 × 10−5 | 0.716 |
Biological roleEdit
Carbon dioxide is an end product of cellular respiration in organisms that obtain energy by breaking down sugars, fats and amino acids with oxygen as part of their metabolism. This includes all plants, algae and animals and aerobic fungi and bacteria. In vertebrates, the carbon dioxide travels in the blood from the body's tissues to the skin (e.g., amphibians) or the gills (e.g., fish), from where it dissolves in the water, or to the lungs from where it is exhaled. During active photosynthesis, plants can absorb more carbon dioxide from the atmosphere than they release in respiration.
Photosynthesis and carbon fixationEdit
Carbon fixation is a biochemical process by which atmospheric carbon dioxide is incorporated by plants, algae and cyanobacteria into energy-rich organic molecules such as glucose, thus creating their own food by photosynthesis. Photosynthesis uses carbon dioxide and water to produce sugars from which other organic compounds can be constructed, and oxygen is produced as a by-product.
Ribulose-1,5-bisphosphate carboxylase oxygenase, commonly abbreviated to RuBisCO, is the enzyme involved in the first major step of carbon fixation, the production of two molecules of 3-phosphoglycerate from Template:CO2 and ribulose bisphosphate, as shown in the diagram at left.
RuBisCO is thought to be the single most abundant protein on Earth.<ref>Template:Cite journal</ref>
Phototrophs use the products of their photosynthesis as internal food sources and as raw material for the biosynthesis of more complex organic molecules, such as polysaccharides, nucleic acids, and proteins. These are used for their own growth, and also as the basis of the food chains and webs that feed other organisms, including animals such as ourselves. Some important phototrophs, the coccolithophores synthesise hard calcium carbonate scales.<ref>Template:Cite book</ref> A globally significant species of coccolithophore is Emiliania huxleyi whose calcite scales have formed the basis of many sedimentary rocks such as limestone, where what was previously atmospheric carbon can remain fixed for geological timescales.
Plants can grow as much as 50% faster in concentrations of 1,000 ppm Template:CO2 when compared with ambient conditions, though this assumes no change in climate and no limitation on other nutrients.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Elevated Template:CO2 levels cause increased growth reflected in the harvestable yield of crops, with wheat, rice and soybean all showing increases in yield of 12–14% under elevated Template:CO2 in FACE experiments.<ref>Template:Cite journal</ref><ref>Template:Cite journal</ref>
Increased atmospheric Template:CO2 concentrations result in fewer stomata developing on plants<ref>Template:Cite journal</ref> which leads to reduced water usage and increased water-use efficiency.<ref>Template:Cite journal</ref> Studies using FACE have shown that Template:CO2 enrichment leads to decreased concentrations of micronutrients in crop plants.<ref>Template:Cite journal</ref> This may have knock-on effects on other parts of ecosystems as herbivores will need to eat more food to gain the same amount of protein.<ref>Template:Cite journal</ref>
The concentration of secondary metabolites such as phenylpropanoids and flavonoids can also be altered in plants exposed to high concentrations of Template:CO2.<ref>Template:Cite journal</ref><ref>Template:Cite journal</ref>
Plants also emit Template:CO2 during respiration, and so the majority of plants and algae, which use C3 photosynthesis, are only net absorbers during the day. Though a growing forest will absorb many tons of Template:CO2 each year, a mature forest will produce as much Template:CO2 from respiration and decomposition of dead specimens (e.g., fallen branches) as is used in photosynthesis in growing plants.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Contrary to the long-standing view that they are carbon neutral, mature forests can continue to accumulate carbon<ref>Template:Cite journal</ref> and remain valuable carbon sinks, helping to maintain the carbon balance of Earth's atmosphere. Additionally, and crucially to life on earth, photosynthesis by phytoplankton consumes dissolved Template:CO2 in the upper ocean and thereby promotes the absorption of Template:CO2 from the atmosphere.<ref>Template:Cite journal</ref>
ToxicityEdit
Carbon dioxide content in fresh air (averaged between sea-level and 10 kPa level, i.e., about Template:Cvt altitude) varies between 0.036% (360 ppm) and 0.041% (412 ppm), depending on the location.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
In humans, exposure to Template:CO2 at concentrations greater than 5% causes the development of hypercapnia and respiratory acidosis.<ref name="Permentier-2017">Template:Cite journalFile:CC-BY icon.svg Text was copied from this source, which is available under a Creative Commons Attribution 4.0 International License</ref> Concentrations of 7% to 10% (70,000 to 100,000 ppm) may cause suffocation, even in the presence of sufficient oxygen, manifesting as dizziness, headache, visual and hearing dysfunction, and unconsciousness within a few minutes to an hour.<ref name="USEPA">Template:Cite news</ref> Concentrations of more than 10% may cause convulsions, coma, and death. Template:CO2 levels of more than 30% act rapidly leading to loss of consciousness in seconds.<ref name="Permentier-2017" />
Because it is heavier than air, in locations where the gas seeps from the ground (due to sub-surface volcanic or geothermal activity) in relatively high concentrations, without the dispersing effects of wind, it can collect in sheltered/pocketed locations below average ground level, causing animals located therein to be suffocated. Carrion feeders attracted to the carcasses are then also killed. Children have been killed in the same way near the city of Goma by Template:CO2 emissions from the nearby volcano Mount Nyiragongo.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}.</ref> The Swahili term for this phenomenon is {{#invoke:Lang|lang}}.
Adaptation to increased concentrations of Template:CO2 occurs in humans, including modified breathing and kidney bicarbonate production, in order to balance the effects of blood acidification (acidosis). Several studies suggested that 2.0 percent inspired concentrations could be used for closed air spaces (e.g. a submarine) since the adaptation is physiological and reversible, as deterioration in performance or in normal physical activity does not happen at this level of exposure for five days.<ref>Template:Cite report</ref><ref>Template:Cite report</ref> Yet, other studies show a decrease in cognitive function even at much lower levels.<ref name="pollutant2012">Template:Cite journal</ref><ref name="scores2016">Template:Cite journal</ref> Also, with ongoing respiratory acidosis, adaptation or compensatory mechanisms will be unable to reverse the condition.
Below 1%Edit
There are few studies of the health effects of long-term continuous Template:CO2 exposure on humans and animals at levels below 1%. Occupational Template:CO2 exposure limits have been set in the United States at 0.5% (5000 ppm) for an eight-hour period.<ref name="inspectpedia">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> At this Template:CO2 concentration, International Space Station crew experienced headaches, lethargy, mental slowness, emotional irritation, and sleep disruption.<ref>Template:Cite report</ref> Studies in animals at 0.5% Template:CO2 have demonstrated kidney calcification and bone loss after eight weeks of exposure.<ref>Template:Cite journal</ref> A study of humans exposed in 2.5 hour sessions demonstrated significant negative effects on cognitive abilities at concentrations as low as 0.1% (1000Template:Nbspppm) Template:CO2 likely due to Template:CO2 induced increases in cerebral blood flow.<ref name="pollutant2012" /> Another study observed a decline in basic activity level and information usage at 1000 ppm, when compared to 500 ppm.<ref name="scores2016" />
However a review of the literature found that a reliable subset of studies on the phenomenon of carbon dioxide induced cognitive impairment to only show a small effect on high-level decision making (for concentrations below 5000 ppm). Most of the studies were confounded by inadequate study designs, environmental comfort, uncertainties in exposure doses and differing cognitive assessments used.<ref>Template:Cite journal</ref> Similarly a study on the effects of the concentration of Template:CO2 in motorcycle helmets has been criticized for having dubious methodology in not noting the self-reports of motorcycle riders and taking measurements using mannequins. Further when normal motorcycle conditions were achieved (such as highway or city speeds) or the visor was raised the concentration of Template:CO2 declined to safe levels (0.2%).<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>Template:Cite journal</ref>
| Concentration | Note | |
|---|---|---|
| 280 ppm | Pre-industrial levels | |
| 421 ppm | Current (May 2022) levels | |
| ~1121 ppm | ASHRAE recommendation for indoor air<ref>{{#invoke:citation/CS1|citation | CitationClass=web
}}</ref> |
| 5,000 ppm | USA 8h exposure limit<ref name="inspectpedia"/> | |
| 10,000 ppm | Cognitive impairment, Canada's long term exposure limit<ref name="friedman" /> | |
| 10,000-20,000 ppm | Drowsiness<ref name="USEPA" /> | |
| 20,000-50,000 ppm | Headaches, sleepiness; poor concentration, loss of attention, slight nausea also possible<ref name="inspectpedia" /> |
VentilationEdit
Poor ventilation is one of the main causes of excessive Template:CO2 concentrations in closed spaces, leading to poor indoor air quality. Carbon dioxide differential above outdoor concentrations at steady state conditions (when the occupancy and ventilation system operation are sufficiently long that Template:CO2 concentration has stabilized) are sometimes used to estimate ventilation rates per person.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Higher Template:CO2 concentrations are associated with occupant health, comfort and performance degradation.<ref>Template:Cite journal</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> ASHRAE Standard 62.1–2007 ventilation rates may result in indoor concentrations up to 2,100 ppm above ambient outdoor conditions. Thus if the outdoor concentration is 400 ppm, indoor concentrations may reach 2,500 ppm with ventilation rates that meet this industry consensus standard. Concentrations in poorly ventilated spaces can be found even higher than this (range of 3,000 or 4,000 ppm).
Miners, who are particularly vulnerable to gas exposure due to insufficient ventilation, referred to mixtures of carbon dioxide and nitrogen as "blackdamp", "choke damp" or "stythe". Before more effective technologies were developed, miners would frequently monitor for dangerous levels of blackdamp and other gases in mine shafts by bringing a caged canary with them as they worked. The canary is more sensitive to asphyxiant gases than humans, and as it became unconscious would stop singing and fall off its perch. The Davy lamp could also detect high levels of blackdamp (which sinks, and collects near the floor) by burning less brightly, while methane, another suffocating gas and explosion risk, would make the lamp burn more brightly.
In February 2020, three people died from suffocation at a party in Moscow when dry ice (frozen Template:CO2) was added to a swimming pool to cool it down.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> A similar accident occurred in 2018 when a woman died from Template:CO2 fumes emanating from the large amount of dry ice she was transporting in her car.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
Indoor airEdit
Humans spend more and more time in a confined atmosphere (around 80-90% of the time in a building or vehicle). According to the French Agency for Food, Environmental and Occupational Health & Safety (ANSES) and various actors in France, the Template:CO2 rate in the indoor air of buildings (linked to human or animal occupancy and the presence of combustion installations), weighted by air renewal, is "usually between about 350 and 2,500 ppm".<ref>Template:Cite report</ref>
In homes, schools, nurseries and offices, there are no systematic relationships between the levels of Template:CO2 and other pollutants, and indoor Template:CO2 is statistically not a good predictor of pollutants linked to outdoor road (or air, etc.) traffic.<ref>Template:Cite journal</ref> Template:CO2 is the parameter that changes the fastest (with hygrometry and oxygen levels when humans or animals are gathered in a closed or poorly ventilated room). In poor countries, many open hearths are sources of Template:CO2 and CO emitted directly into the living environment.<ref>Template:Cite journal</ref>
Outdoor areas with elevated concentrationsEdit
Local concentrations of carbon dioxide can reach high values near strong sources, especially those that are isolated by surrounding terrain. At the Bossoleto hot spring near Rapolano Terme in Tuscany, Italy, situated in a bowl-shaped depression about Template:Cvt in diameter, concentrations of Template:CO2 rise to above 75% overnight, sufficient to kill insects and small animals. After sunrise the gas is dispersed by convection.<ref>Template:Cite book</ref> High concentrations of Template:CO2 produced by disturbance of deep lake water saturated with Template:CO2 are thought to have caused 37 fatalities at Lake Monoun, Cameroon in 1984 and 1700 casualties at Lake Nyos, Cameroon in 1986.<ref>Template:Cite book</ref>
Human physiologyEdit
ContentEdit
| Blood compartment | (kPa) | (mm Hg) |
|---|---|---|
| Venous blood carbon dioxide | Template:Convert<ref name=brookside>{{#invoke:citation/CS1|citation | CitationClass=web
}}</ref> |
| Alveolar pulmonary gas pressures |
Template:Convert | |
| Arterial blood carbon dioxide | Template:Convert<ref name=brookside/> |
The body produces approximately Template:Convert of carbon dioxide per day per person,<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> containing Template:Convert of carbon. Template:Anchor In humans, this carbon dioxide is carried through the venous system and is breathed out through the lungs, resulting in lower concentrations in the arteries. The carbon dioxide content of the blood is often given as the partial pressure, which is the pressure which carbon dioxide would have had if it alone occupied the volume.<ref>Template:Cite book</ref> In humans, the blood carbon dioxide contents are shown in the adjacent table.
Transport in the bloodEdit
Template:CO2 is carried in blood in three different ways. Exact percentages vary between arterial and venous blood.
- Majority (about 70% to 80%) is converted to bicarbonate ions Template:Chem2 by the enzyme carbonic anhydrase in the red blood cells,<ref name="solarnav">{{#invoke:citation/CS1|citation
|CitationClass=web }}</ref> by the reaction:
- 5–10% is dissolved in blood plasma<ref name="solarnav" />
- 5–10% is bound to hemoglobin as carbamino compounds<ref name="solarnav" />
Hemoglobin, the main oxygen-carrying molecule in red blood cells, carries both oxygen and carbon dioxide. However, the Template:CO2 bound to hemoglobin does not bind to the same site as oxygen. Instead, it combines with the N-terminal groups on the four globin chains. However, because of allosteric effects on the hemoglobin molecule, the binding of Template:CO2 decreases the amount of oxygen that is bound for a given partial pressure of oxygen. This is known as the Haldane Effect, and is important in the transport of carbon dioxide from the tissues to the lungs. Conversely, a rise in the partial pressure of Template:CO2 or a lower pH will cause offloading of oxygen from hemoglobin, which is known as the Bohr effect.
Regulation of respirationEdit
Carbon dioxide is one of the mediators of local autoregulation of blood supply. If its concentration is high, the capillaries expand to allow a greater blood flow to that tissue.<ref>Template:Cite journal</ref>
Bicarbonate ions are crucial for regulating blood pH. A person's breathing rate influences the level of Template:CO2 in their blood. Breathing that is too slow or shallow causes respiratory acidosis, while breathing that is too rapid leads to hyperventilation, which can cause respiratory alkalosis.<ref>Template:Cite journal</ref>
Although the body requires oxygen for metabolism, low oxygen levels normally do not stimulate breathing. Rather, breathing is stimulated by higher carbon dioxide levels. As a result, breathing low-pressure air or a gas mixture with no oxygen at all (such as pure nitrogen) can lead to loss of consciousness without ever experiencing air hunger. This is especially perilous for high-altitude fighter pilots. It is also why flight attendants instruct passengers, in case of loss of cabin pressure, to apply the oxygen mask to themselves first before helping others; otherwise, one risks losing consciousness.<ref name="solarnav" />
The respiratory centers try to maintain an arterial Template:CO2 pressure of 40 mmHg. With intentional hyperventilation, the Template:CO2 content of arterial blood may be lowered to 10–20 mmHg (the oxygen content of the blood is little affected), and the respiratory drive is diminished. This is why one can hold one's breath longer after hyperventilating than without hyperventilating. This carries the risk that unconsciousness may result before the need to breathe becomes overwhelming, which is why hyperventilation is particularly dangerous before free diving.<ref>Template:Cite journal</ref>
Concentrations and role in the environmentEdit
AtmosphereEdit
Template:Further Template:Excerpt
OceansEdit
{{#invoke:Labelled list hatnote|labelledList|Main article|Main articles|Main page|Main pages}}
Ocean acidificationEdit
Carbon dioxide dissolves in the ocean to form carbonic acid (Template:Chem2), bicarbonate (Template:Chem2), and carbonate (Template:Chem2). There is about fifty times as much carbon dioxide dissolved in the oceans as exists in the atmosphere. The oceans act as an enormous carbon sink, and have taken up about a third of Template:CO2 emitted by human activity.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
Hydrothermal ventsEdit
Carbon dioxide is also introduced into the oceans through hydrothermal vents. The Champagne hydrothermal vent, found at the Northwest Eifuku volcano in the Mariana Trench, produces almost pure liquid carbon dioxide, one of only two known sites in the world as of 2004, the other being in the Okinawa Trough.<ref>Template:Cite journal</ref> The finding of a submarine lake of liquid carbon dioxide in the Okinawa Trough was reported in 2006.<ref>Template:Cite journal Videos can be downloaded at {{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
SourcesEdit
Template:AnchorThe burning of fossil fuels for energy produces 36.8 billion tonnes of Template:CO2 per year as of 2023.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Nearly all of this goes into the atmosphere, where approximately half is subsequently absorbed into natural carbon sinks.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Less than 1% of Template:CO2 produced annually is put to commercial use.<ref name="IEA-2019-3"/>Template:Rp
Biological processesEdit
Carbon dioxide is a by-product of the fermentation of sugar in the brewing of beer, whisky and other alcoholic beverages and in the production of bioethanol. Yeast metabolizes sugar to produce Template:CO2 and ethanol, also known as alcohol, as follows:
All aerobic organisms produce Template:CO2 when they oxidize carbohydrates, fatty acids, and proteins. The large number of reactions involved are exceedingly complex and not described easily. Refer to cellular respiration, anaerobic respiration and photosynthesis. The equation for the respiration of glucose and other monosaccharides is:
Anaerobic organisms decompose organic material producing methane and carbon dioxide together with traces of other compounds.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Regardless of the type of organic material, the production of gases follows well defined kinetic pattern. Carbon dioxide comprises about 40–45% of the gas that emanates from decomposition in landfills (termed "landfill gas"). Most of the remaining 50–55% is methane.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
CombustionEdit
The combustion of all carbon-based fuels, such as methane (natural gas), petroleum distillates (gasoline, diesel, kerosene, propane), coal, wood and generic organic matter produces carbon dioxide and, except in the case of pure carbon, water. As an example, the chemical reaction between methane and oxygen:
Iron is reduced from its oxides with coke in a blast furnace, producing pig iron and carbon dioxide:<ref> Template:Cite book</ref>
By-product from hydrogen productionEdit
Carbon dioxide is a byproduct of the industrial production of hydrogen by steam reforming and the water gas shift reaction in ammonia production. These processes begin with the reaction of water and natural gas (mainly methane).<ref>Template:Cite book</ref>
Thermal decomposition of limestoneEdit
It is produced by thermal decomposition of limestone, Template:Chem2 by heating (calcining) at about Template:Convert, in the manufacture of quicklime (calcium oxide, CaO), a compound that has many industrial uses:
Acids liberate Template:CO2 from most metal carbonates. Consequently, it may be obtained directly from natural carbon dioxide springs, where it is produced by the action of acidified water on limestone or dolomite. The reaction between hydrochloric acid and calcium carbonate (limestone or chalk) is shown below:
The carbonic acid (Template:Chem2) then decomposes to water and Template:CO2:
Such reactions are accompanied by foaming or bubbling, or both, as the gas is released. They have widespread uses in industry because they can be used to neutralize waste acid streams.
Commercial usesEdit
Around 230 Mt of Template:CO2 are used each year,<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> mostly in the fertiliser industry for urea production (130 million tonnes) and in the oil and gas industry for enhanced oil recovery (70 to 80 million tonnes).<ref name="IEA-2019-3"/>Template:Rp Other commercial applications include food and beverage production, metal fabrication, cooling, fire suppression and stimulating plant growth in greenhouses.<ref name="IEA-2019-3" />Template:Rp
Technology exists to [[Carbon capture and storage|capture Template:CO2 from industrial flue gas]] or from the air. Research is ongoing on ways to use [[Carbon capture and storage#CO2 utilization in products|captured Template:CO2 in products]] and some of these processes have been deployed commercially.<ref name="Dziejarski-2023">Template:Cite journalFile:CC-BY icon.svg Text was copied from this source, which is available under a Creative Commons Attribution 4.0 International License</ref> However, the potential to use products is very small compared to the total volume of Template:CO2 that could foreseeably be captured.<ref name="IEA-2024">{{#invoke:citation/CS1|citation |CitationClass=web }}File:CC-BY icon.svg Text was copied from this source, which is available under a Creative Commons Attribution 4.0 International License</ref> The vast majority of captured Template:CO2 is considered a waste product and sequestered in underground geologic formations.<ref name="Sekera-2020">Template:Cite journalText was copied from this source, which is available under a Creative Commons Attribution 4.0 International License</ref>
Precursor to chemicalsEdit
Template:Expand section Template:See also In the chemical industry, carbon dioxide is mainly consumed as an ingredient in the production of urea, with a smaller fraction being used to produce methanol and a range of other products.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Some carboxylic acid derivatives such as sodium salicylate are prepared using Template:CO2 by the Kolbe–Schmitt reaction.<ref>Template:Cite book</ref>
Captured Template:CO2 could be to produce methanol or electrofuels. To be carbon-neutral, the Template:CO2 would need to come from bioenergy production or direct air capture.<ref name="IEA-2020">IEA (2020), CCUS in Clean Energy Transitions, IEA, Paris File:CC-BY icon.svg Text was copied from this source, which is available under a Creative Commons Attribution 4.0 International License</ref>Template:Rp
Fossil fuel recoveryEdit
Carbon dioxide is used in enhanced oil recovery where it is injected into or adjacent to producing oil wells, usually under supercritical conditions, when it becomes miscible with the oil. This approach can increase original oil recovery by reducing residual oil saturation by 7–23% additional to primary extraction.<ref>Template:Cite book</ref> It acts as both a pressurizing agent and, when dissolved into the underground crude oil, significantly reduces its viscosity, and changing surface chemistry enabling the oil to flow more rapidly through the reservoir to the removal well.<ref>Template:Cite journal</ref>
Most Template:CO2 injected in Template:CO2-EOR projects comes from naturally occurring underground Template:CO2 deposits.<ref name="IEA-2019">{{#invoke:citation/CS1|citation |CitationClass=web }} Text was copied from this source, which is available under a Creative Commons Attribution 4.0 International License</ref> Some Template:CO2 used in EOR is captured from industrial facilities such as natural gas processing plants, using carbon capture technology and transported to the oilfield in pipelines.<ref name="IEA-2019" />
AgricultureEdit
Plants require carbon dioxide to conduct photosynthesis. The atmospheres of greenhouses may (if of large size, must) be enriched with additional Template:CO2 to sustain and increase the rate of plant growth.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>Template:Cite book</ref> At very high concentrations (100 times atmospheric concentration, or greater), carbon dioxide can be toxic to animal life, so raising the concentration to 10,000 ppm (1%) or higher for several hours will eliminate pests such as whiteflies and spider mites in a greenhouse.<ref>Template:Cite journal</ref> Some plants respond more favorably to rising carbon dioxide concentrations than others, which can lead to vegetation regime shifts like woody plant encroachment.<ref>Template:Citation</ref>
FoodsEdit
Carbon dioxide is a food additive used as a propellant and acidity regulator in the food industry. It is approved for usage in the EU<ref>UK Food Standards Agency: {{#invoke:citation/CS1|citation |CitationClass=web }}</ref> (listed as E number E290), US,<ref>US Food and Drug Administration: {{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Australia and New Zealand<ref>Australia New Zealand Food Standards Code{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> (listed by its INS number 290).
A candy called Pop Rocks is pressurized with carbon dioxide gas<ref>Template:Cite book</ref> at about Template:Convert. When placed in the mouth, it dissolves (just like other hard candy) and releases the gas bubbles with an audible pop.
Leavening agents cause dough to rise by producing carbon dioxide.<ref>Template:Cite bookTemplate:Dead link</ref> Baker's yeast produces carbon dioxide by fermentation of sugars within the dough, while chemical leaveners such as baking powder and baking soda release carbon dioxide when heated or if exposed to acids.
BeveragesEdit
Carbon dioxide is used to produce carbonated soft drinks and soda water. Traditionally, the carbonation of beer and sparkling wine came about through natural fermentation, but many manufacturers carbonate these drinks with carbon dioxide recovered from the fermentation process. In the case of bottled and kegged beer, the most common method used is carbonation with recycled carbon dioxide. With the exception of British real ale, draught beer is usually transferred from kegs in a cold room or cellar to dispensing taps on the bar using pressurized carbon dioxide, sometimes mixed with nitrogen.
The taste of soda water (and related taste sensations in other carbonated beverages) is an effect of the dissolved carbon dioxide rather than the bursting bubbles of the gas. Carbonic anhydrase 4 converts carbon dioxide to carbonic acid leading to a sour taste, and also the dissolved carbon dioxide induces a somatosensory response.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
WinemakingEdit
Carbon dioxide in the form of dry ice is often used during the cold soak phase in winemaking to cool clusters of grapes quickly after picking to help prevent spontaneous fermentation by wild yeast. The main advantage of using dry ice over water ice is that it cools the grapes without adding any additional water that might decrease the sugar concentration in the grape must, and thus the alcohol concentration in the finished wine. Carbon dioxide is also used to create a hypoxic environment for carbonic maceration, the process used to produce Beaujolais wine.
Carbon dioxide is sometimes used to top up wine bottles or other storage vessels such as barrels to prevent oxidation, though it has the problem that it can dissolve into the wine, making a previously still wine slightly fizzy. For this reason, other gases such as nitrogen or argon are preferred for this process by professional wine makers.
Stunning animalsEdit
Carbon dioxide is often used to "stun" animals before slaughter.<ref>Template:Cite journal</ref> "Stunning" may be a misnomer, as the animals are not knocked out immediately and may suffer distress.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref name=Campbell>Template:Cite journal</ref>
Inert gasEdit
Carbon dioxide is one of the most commonly used compressed gases for pneumatic (pressurized gas) systems in portable pressure tools. Carbon dioxide is also used as an atmosphere for welding, although in the welding arc, it reacts to oxidize most metals. Use in the automotive industry is common despite significant evidence that welds made in carbon dioxide are more brittle than those made in more inert atmospheres.<ref>Template:Cite book</ref> When used for MIG welding, Template:CO2 use is sometimes referred to as MAG welding, for Metal Active Gas, as Template:CO2 can react at these high temperatures. It tends to produce a hotter puddle than truly inert atmospheres, improving the flow characteristics. Although, this may be due to atmospheric reactions occurring at the puddle site. This is usually the opposite of the desired effect when welding, as it tends to embrittle the site, but may not be a problem for general mild steel welding, where ultimate ductility is not a major concern.
Carbon dioxide is used in many consumer products that require pressurized gas because it is inexpensive and nonflammable, and because it undergoes a phase transition from gas to liquid at room temperature at an attainable pressure of approximately Template:Convert, allowing far more carbon dioxide to fit in a given container than otherwise would. Life jackets often contain canisters of pressured carbon dioxide for quick inflation. Aluminium capsules of Template:CO2 are also sold as supplies of compressed gas for air guns, paintball markers/guns, inflating bicycle tires, and for making carbonated water. High concentrations of carbon dioxide can also be used to kill pests. Liquid carbon dioxide is used in supercritical drying of some food products and technological materials, in the preparation of specimens for scanning electron microscopy<ref name=Nordestgaard>Template:Cite journal</ref> and in the decaffeination of coffee beans.
Fire extinguisherEdit
Carbon dioxide can be used to extinguish flames by flooding the environment around the flame with the gas. It does not itself react to extinguish the flame, but starves the flame of oxygen by displacing it. Some fire extinguishers, especially those designed for electrical fires, contain liquid carbon dioxide under pressure. Carbon dioxide extinguishers work well on small flammable liquid and electrical fires, but not on ordinary combustible fires, because they do not cool the burning substances significantly, and when the carbon dioxide disperses, they can catch fire upon exposure to atmospheric oxygen. They are mainly used in server rooms.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
Carbon dioxide has also been widely used as an extinguishing agent in fixed fire-protection systems for local application of specific hazards and total flooding of a protected space.<ref>National Fire Protection Association Code 12.</ref> International Maritime Organization standards recognize carbon dioxide systems for fire protection of ship holds and engine rooms. Carbon dioxide-based fire-protection systems have been linked to several deaths, because it can cause suffocation in sufficiently high concentrations. A review of Template:CO2 systems identified 51 incidents between 1975 and the date of the report (2000), causing 72 deaths and 145 injuries.<ref>Carbon Dioxide as a Fire Suppressant: Examining the Risks, US EPA. 2000.</ref>
Supercritical Template:CO2 as solventEdit
Liquid carbon dioxide is a good solvent for many lipophilic organic compounds and is used to decaffeinate coffee.<ref name="Tsotsas">Template:Cite book</ref> Carbon dioxide has attracted attention in the pharmaceutical and other chemical processing industries as a less toxic alternative to more traditional solvents such as organochlorides. It is also used by some dry cleaners for this reason. It is used in the preparation of some aerogels because of the properties of supercritical carbon dioxide.
RefrigerantEdit
Liquid and solid carbon dioxide are important refrigerants, especially in the food industry, where they are employed during the transportation and storage of ice cream and other frozen foods. Solid carbon dioxide is called "dry ice" and is used for small shipments where refrigeration equipment is not practical. Solid carbon dioxide is always below Template:Convert at regular atmospheric pressure, regardless of the air temperature.
Template:Anchor Liquid carbon dioxide (industry nomenclature R744 or R-744) was used as a refrigerant prior to the use of dichlorodifluoromethane (R12, a chlorofluorocarbon (CFC) compound).<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Template:CO2 might enjoy a renaissance because one of the main substitutes to CFCs, 1,1,1,2-tetrafluoroethane (R134a, a hydrofluorocarbon (HFC) compound) contributes to climate change more than Template:CO2 does. Template:CO2 physical properties are highly favorable for cooling, refrigeration, and heating purposes, having a high volumetric cooling capacity. Due to the need to operate at pressures of up to Template:Convert, Template:CO2 systems require highly mechanically resistant reservoirs and components that have already been developed for mass production in many sectors. In automobile air conditioning, in more than 90% of all driving conditions for latitudes higher than 50°, Template:CO2 (R744) operates more efficiently than systems using HFCs (e.g., R134a). Its environmental advantages (GWP of 1, non-ozone depleting, non-toxic, non-flammable) could make it the future working fluid to replace current HFCs in cars, supermarkets, and heat pump water heaters, among others. Coca-Cola has fielded Template:CO2-based beverage coolers and the U.S. Army is interested in Template:CO2 refrigeration and heating technology.<ref name="ccref1">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref name="usforces">Template:Cite news</ref>
Minor usesEdit
Carbon dioxide is the lasing medium in a carbon-dioxide laser, which is one of the earliest type of lasers.
Carbon dioxide can be used as a means of controlling the pH of swimming pools,<ref>Template:Cite book</ref> by continuously adding gas to the water, thus keeping the pH from rising. Among the advantages of this is the avoidance of handling (more hazardous) acids. Similarly, it is also used in the maintaining reef aquaria, where it is commonly used in calcium reactors to temporarily lower the pH of water being passed over calcium carbonate in order to allow the calcium carbonate to dissolve into the water more freely, where it is used by some corals to build their skeleton.
Used as the primary coolant in the British advanced gas-cooled reactor for nuclear power generation.
Carbon dioxide induction is commonly used for the euthanasia of laboratory research animals. Methods to administer Template:CO2 include placing animals directly into a closed, prefilled chamber containing Template:CO2, or exposure to a gradually increasing concentration of Template:CO2. The American Veterinary Medical Association's 2020 guidelines for carbon dioxide induction state that a displacement rate of 30–70% of the chamber or cage volume per minute is optimal for the humane euthanasia of small rodents.<ref name=avma>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>Template:Rp Percentages of Template:CO2 vary for different species, based on identified optimal percentages to minimize distress.<ref name=avma />Template:Rp
Carbon dioxide is also used in several related cleaning and surface-preparation techniques.
History of discoveryEdit
Carbon dioxide was the first gas to be described as a discrete substance. In about 1640,<ref>Template:Cite journal</ref> the Flemish chemist Jan Baptist van Helmont observed that when he burned charcoal in a closed vessel, the mass of the resulting ash was much less than that of the original charcoal. His interpretation was that the rest of the charcoal had been transmuted into an invisible substance he termed a "gas" (from Greek "chaos") or "wild spirit" (spiritus sylvestris).<ref>Template:Cite book</ref>
The properties of carbon dioxide were further studied in the 1750s by the Scottish physician Joseph Black. He found that limestone (calcium carbonate) could be heated or treated with acids to yield a gas he called "fixed air". He observed that the fixed air was denser than air and supported neither flame nor animal life. Black also found that when bubbled through limewater (a saturated aqueous solution of calcium hydroxide), it would precipitate calcium carbonate. He used this phenomenon to illustrate that carbon dioxide is produced by animal respiration and microbial fermentation. In 1772, English chemist Joseph Priestley published a paper entitled Impregnating Water with Fixed Air in which he described a process of dripping sulfuric acid (or oil of vitriol as Priestley knew it) on chalk in order to produce carbon dioxide, and forcing the gas to dissolve by agitating a bowl of water in contact with the gas.<ref name="Priestley">Template:Cite journal</ref>
Carbon dioxide was first liquefied (at elevated pressures) in 1823 by Humphry Davy and Michael Faraday.<ref name="Davy">Template:Cite journal</ref> The earliest description of solid carbon dioxide (dry ice) was given by the French inventor Adrien-Jean-Pierre Thilorier, who in 1835 opened a pressurized container of liquid carbon dioxide, only to find that the cooling produced by the rapid evaporation of the liquid yielded a "snow" of solid Template:CO2.<ref>Template:Cite journal</ref><ref>Template:Cite journal</ref>
Carbon dioxide in combination with nitrogen was known from earlier times as Blackdamp, stythe or choke damp.Template:Efn Along with the other types of damp it was encountered in mining operations and well sinking. Slow oxidation of coal and biological processes replaced the oxygen to create a suffocating mixture of nitrogen and carbon dioxide.<ref>Template:Cite journal</ref>
See alsoEdit
Template:Portal Template:Div col
- Template:Annotated link
- Template:Annotated link
- Template:Annotated link (from the atmosphere)
- Template:Annotated link (early work on Template:CO2 and climate change)
- Template:Annotated link
- List of countries by carbon dioxide emissions
- List of least carbon efficient power stations
- Template:Annotated link
- NASA's Template:Annotated link
- Template:Annotated link
NotesEdit
Template:Reflist Template:Notelist
ReferencesEdit
External linksEdit
Template:Sister project Template:Library resources box
- Current global map of carbon dioxide concentration
- CDC – NIOSH Pocket Guide to Chemical Hazards – Carbon Dioxide
- Trends in Atmospheric Carbon Dioxide (NOAA)
- The rediscovery of Template:CO2: History, What is Shecco? - as refrigerant
Template:Oxides Template:Oxides of carbon Template:Inorganic compounds of carbon Template:Global Warming Template:Molecules detected in outer space Template:Oxygen compounds Template:Authority control