Studding sail

Revision as of 21:05, 31 January 2025 by imported>Rusalkii (Adding short description: "Extra sail on a sailing ship")
(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)

Template:Short description

File:USS Monongahela (1862).jpg
Template:USS with a full set of studding sails set

A studding sail, or stun'sl (pronounced stuns'l Template:IPAc-en) is an extra sail on a square rigged vessel for use in fair weather. It is set outside the square sails, using stun'sl booms which run out along the yards. They came into use some time in the middle of the 17th century and by the beginning of the 19th century were usual on all square rigged sailing vessels. They started to become less common in the last quarter of the 19th century, as the economies of smaller crews and avoidance of damage to the ship's gear became more important than a fast voyage.

HistoryEdit

File:Jack Spurling - ARIEL & TAEPING, China Tea Clippers Race.jpg
A painting of racing tea clippers by Jack Spurling, a marine artist known for his technical accuracy. This shows the reasonable maximum amount of stun'sls that could be set so that they did not interfere with each other.

The origins of studding sails are relatively uncertain. The earliest reference is in 1655, but precise information on how these early examples were rigged is unknown. It is not until 1790 that this is available. Some changes in the detail of design and usage occurred over succeeding years.<ref name="Lees 1979">Template:Cite book</ref>Template:Rp

All ordinary working square-rigged vessels were usually fitted out to set stun'sls by the start of the 19th century. This started to change in the last quarter of the 19th century.<ref name="MacGregor 1984">Template:Cite book</ref>Template:Rp<ref name="Gardiner and Greenhill 1993">Template:Cite book</ref>Template:Rp As steamers took over routes and cargoes that needed fast passages, sailing vessels competed by being able to cut costs much more easily. Crew sizes were reduced, so there were fewer experienced hands to set and take in stun'sls. Any ship which pressed on in rising winds risked breaking a stun'sl boom or damaging sailsTemplate:En dashif the owner had all or some of the stun'sls sent ashore, there was less to break and these repair costs avoided. Clippers on the routes to China continued to race against each other with large crews and full suits of sails (which included stun'sls) until they also had their trade taken over by steamers in the years following the opening of the Suez Canal in 1869. As these ships took other routes, most of them had the same economies applied.<ref name="MacGregor 1983">Template:Cite book</ref>Template:Rp

DescriptionEdit

A studding sail is an extra sail hoisted alongside a square-rigged sail.<ref name="king424">Template:Cite book</ref> It is named from the mast that it is set alongside: top-gallant studding sail, topmast studding sail and lower studding sail.<ref name="Underhill 1946">Template:Cite book</ref>Template:Rp These sails provide extra speed in fine weather.<ref>Template:Cite book</ref>

ReferencesEdit

Template:Reflist

BibliographyEdit

External linksEdit

Two pictures [1] showing Template:Ship and Pride of Baltimore II, each with a topmast studding sail set on the port side of the foremast.

Template:Sister project

Template:Sail Types