Template:Short description Template:Infobox aircraft

The Bell 222 is an American twin-engine light helicopter built by Bell Helicopter. The Bell 230 is an improved development with different engines and other minor changes.

DevelopmentEdit

OriginsEdit

In the late 1960s, Bell began designing a new twin-turbine engine light helicopter. A mockup of the new helicopter was displayed in January 1974 at a helicopter convention.<ref name=Apostolo>Apostolo, Giorgio. "Bell Model 222". The Illustrated Encyclopedia of Helicopters. New York: Bonanza Books. 1984. Template:ISBN.</ref> Following interest at the convention, the company announced the new Bell 222.<ref name="Frawley Civil2">Frawley, Gerard, "Bell 222 & 230", The International Directory of Civil Aircraft, 2003-2004, p. 46, Aerospace Publications Pty Ltd, 2003, Template:ISBN</ref> It was the first light commercial twin-turbine helicopter developed in the United States.<ref name=Donald>Donald, David, ed. "Bell Model 222". The Complete Encyclopedia of World Aircraft. Barnes & Nobel Books, 1997. Template:ISBN.</ref>

The Bell 222 incorporated a number of advanced features, including dual hydraulic and electrical systems, sponsons housing the retractable landing gear, and the Noda Matic vibration reduction system developed for the Bell 214ST.<ref name="Frawley Civil"/>

Manufacturing began in 1975.<ref name=Apostolo/> The Model 222 first flew on August 13, 1976. It received certification from the Federal Aviation Administration (FAA) on August 16, 1979, and was approved for visual flight rules (VFR) use on December 20, 1979. Helicopter deliveries began on January 16, 1980. The FAA approved the 222 for single-pilot instrument flight rules (IFR) operation on May 15, 1980.<ref name=Pelletier>Pelletier, Alain J. Bell Aircraft Since 1935. US Naval Institute Press, 1992. Template:ISBN.</ref>

Improved versionsEdit

The more powerful Bell 222B was introduced in 1982 with a larger diameter main rotor. The 222B-based Bell 222UT Utility Twin, with skid landing gear, was introduced in 1983.<ref name="Frawley Civil"/>

A development of the 222 is the Bell 230, with the 222's LTS 101 engines replaced by two Allison 250 turboshaft engines, plus other refinements. A converted 222 first flew as the prototype 230 on August 12, 1991. Transport Canada awarded certification in March 1992, and the first production 230 was delivered that November. The 230 had optional skid or wheel undercarriage. Production ended in 1995 with 38 having been built, being replaced in Bell's lineup by the stretched, more powerful Bell 430.<ref name="Frawley Civil"/>

DesignEdit

File:Lts101-750 bht222U aradecki.jpg
LTS 101-750 engine installation (left engine) in a 222U

The design includes two main rotor blades of stainless-steel-fiberglass construction and rotor hub with elastomeric bearings, which are lubricant free.<ref name=Donald/> Its cabin holds a maximum of ten persons with one-two pilots and eight to nine passengers. Seating configurations include standard seating for a pilot and seven passengers; or executive seating with one to two pilots and seating for five to six.<ref name=Donald/> The Bell 222 and 230 are usually flown single-pilot (optional dual controls are available), and can be configured for corporate/executive, EMS or utility transport missions.<ref name="Frawley Civil"/>

The Bell 222 is powered by twin Lycoming/Honeywell LTS101-650 turboshaft engines, rated at 592 shp each.<ref name=Pelletier/> Later 222 versions feature more powerful engines. Engine output is at 100% of rating at 9598 RPM. Two independent driveshafts deliver power from the engines to the transmission. The Bell 222's LTS101 engine exhaust stacks are located at the rear of the engines, while the 230's Allison engine exhaust stacks are located high on the cowling. Fuel is stored in three tanks, one in the fuselage and one in each sponson. The main rear landing gear retracts into the sponsons.<ref name=Apostolo/>

The Bell 222's rotor systems include:

  • Two-blade, semi-rigid high-kinetic energy main rotor with preconing and underslinging. The rotor head incorporates elastomeric bearings for hub springs, and flapping and pitch change bearings. The system is similar in design to that used by the AH-1 Cobra. Rotor speed at 100% engine speed is 348 RPM.
  • All series models incorporate a pusher-type two-bladed tail rotor mounted on the left side of the tailboom, turning at 3396 RPM.

VariantsEdit

File:Bht222U rotorhead aradecki.jpg
Bell 222U rotor head and flight controls
Bell 222
The original Model 222, sometimes unofficially called a Bell 222A to distinguish it from the Bell 222B. It was powered by two (618 hp takeoff rated, 591 hp max continuous rated) Honeywell (formerly Lycoming) LTS101-650C-3 turboshafts.
Bell 222B
In 1982 the 222 was given a power upgrade (two Honeywell (formerly Lycoming) LTS101-750Cs with takeoff rating of 680 hp each), a larger main rotor, and was renamed the Bell 222B.
Bell 222B Executive
This model had improved systems and a luxury interior.
Bell 222UT
A 222B variant with skids, introduced in 1983. The lack of retractable landing gear allowed for larger auxiliary fuel tanks.
Bell D-292
The Advanced Composite Airframe Program (ACAP) was a 1985 all-composite LHX proof-of-concept project. The Bell D-292 used the Avco Lycoming engines, transmission, two-bladed main and tail rotors, tailboom, vertical fin, and rotor pylon of the 222. The D-292 had a new composite airframe.
Bell 230
In 1991, the 222B design was updated, given more uprated engines, and renamed the Bell 230. Production ended in 1995.
Bell 230 Executive
Executive transport version.
Bell 230 Utility
Utility transport version.
Bell 230 EMS
Air ambulance version, equipped with one or two stretchers.
Bell 222SP
During the 1990s, some Bell 222s were modified with the 222B's engines and 230's Allison 250-C30G engines for improved single engine (engine-out) performance, and redesignated as 222SPs.<ref name=JHMS_Bell_222>"Bell 222". Jane's Helicopter Markets and Systems. Jane's Information Group, 2009. (subscription article)Template:Dead link.</ref>
Bell 430
In 1995 the Bell 430, a stretched 230 (adding another seating row), was launched, with uprated engines and a four-blade main rotor.

OperatorsEdit

File:Bell 230 (N830SF) - 1.JPG
Bell 230 of Rotor-Lift Aviation at Agfest 2010
File:Bell 230 N230CH Chilean Navy.jpg
Bell 230 in markings of the Chilean Navy

The Bell 222 has seen service with a large number of civil operators, but only limited military service.

{{#invoke
flag||Albania}}
  • Albtransport (crashed in 2006)<ref>{{#invoke:citation/CS1|citation

|CitationClass=web }}</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

Template:CHL
Template:ECU for evaluations in 1994 only<ref>https://www.helis.com/database/cn/12045/</ref>

|CitationClass=web }}</ref>

Template:JAM

|CitationClass=web }}</ref>

Template:USA
  • Mercy Air<ref>{{#invoke:citation/CS1|citation

|CitationClass=web }}</ref>

SpecificationsEdit

Model 222 222B 222U 230
Announced 1974 1982 1982 1990
First Flight August 13, 1976 1982 1983 August 12, 1991
Certified December 1979 August 1982 April 1983 March 1992
Delivered 1980 1982 1983 November 1992
Seats Front: pilot + one.   Main: four–six (depending on seat types)
Maximum ten (pilot and nine passengers)<ref name="tcds">FAA Type Certificate Data SheetTemplate:Dead link</ref>
Height 11 ft 8 in (3.56 m) 12 ft 2 in (3.71 m) 11 ft 8 in (3.56 m)
Fuselage length Template:Convert<ref name="jawa88p346-7"/> 42 ft 11 in (12.78 m) 42 ft 3 in (12.88 m)
Rotor diameter Template:Convert<ref name="jawa82p312">Template:Harvnb</ref> 42 ft (12.80 m)
Length overall 49 ft 6 in (15.1 m) 50 ft 3 in (15.32 m)
Engine (2x) Lycoming LTS101-650C-3 Lycoming LTS101-750C Rolls-Royce 250-C30G/2
Power (2x) Template:Convert<ref name="jawa82p312"/> Template:Convert<ref name="jawa88p346-7">Template:Harvnb</ref> 700 hp (520 kW)
Max speed Template:Convert<ref name="jawa82p312"/>
(cruise)
135 kt
(155 mph, 250 km/h)
140 kt
(161 mph, 260 km/h)
Climb rate Template:Convert<ref name="jawa82p312"/> 1,730 ft/min (8.79 m/s) ~1,600 ft/min (8.13 m/s)
Service ceiling Template:Convert<ref name="jawa82p312"/> 15,800 ft (4,816 m) 15,500 ft (4,724 m)
Hover ceiling Template:Convert<ref name="jawa82p312"/> 10,300 ft (3,139 m) 12,400 ft (3,780 m)
Fuel capacity 188+48 US gal (710+182 L) 188+122 US gal (710+460 L) 188+ US gal (710+ L)
Range Template:Convert<ref name="jawa82p312"/> 378 nmi
(434 mi, 700 km)
486 nmi
(559 mi, 900 km)
378 nmi
(434 mi, 700 km)
Empty weight Template:Convert<ref name="jawa82p312"/> 4,577 lb (2,076 kg) 4,537 lb (2,058 kg) 5,097 lb (2,312 kg)
Maximum takeoff weight Template:Convert<ref name="jawa82p312"/>
(external load)
8,250 lb (3,742 kg) 8,400 lb (3,810 kg)

Sources: Airliners.net,<ref>Bell 222 & 230 page on airliner.net</ref> Helicopterdirect,<ref>Bell helicopter technical data, helicopterdirect.com</ref> others<ref>Bell 222 technical data on airwolf.tv-series.com Template:Webarchive</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

Notable appearances in mediaEdit

{{#invoke:Labelled list hatnote|labelledList|Main article|Main articles|Main page|Main pages}}

The Bell 222 is widely known as the titular helicopter from the television series Airwolf, where a modified 222A was featured.

See alsoEdit

Template:Aircontent

ReferencesEdit

Template:Reflist

BibliographyEdit

External linksEdit

Template:Sister project

Template:Bell Aircraft