Caterpillar D9
Template:Short descriptionTemplate:More references
Template:Use dmy dates Template:Infobox tractor
The Caterpillar D9 is a large track-type tractor designed and manufactured by Caterpillar Inc. It is usually sold as a bulldozer equipped with a detachable large blade and a rear ripper attachment.
The D9, with 354 kW (474 hp) of gross power and an operating weight of Template:Convert, is in the upper end of Caterpillar's track-type tractors, which range in size from the D2 69 kW (92 hp), Template:Convert, to the D11 698 kW (935 hp), Template:Convert.
The size, durability, reliability, and low operating costs have made the D9 one of the most popular large track-type tractors in the world.
As the size, power, and weight of the larger track-type tractors dictate that they are used primarily for major projects, the D9 is most commonly found in construction, demolition, forestry, mining, waste, and quarry operations.
Engineering and technical descriptionEdit
Template:More citations needed section The D9 is a series of heavy tracked-type tractors, carried on continuous tracks and usually used as bulldozers. The series began in 1954 with a prototype tractor called the D9X. Ten D9X prototype models were built in 1954. In 1955, the Template:Convert D9 was introduced to compete against the more powerful Euclid TC-12. The D9 came equipped with a 1,473 cid D353, which powered the D9 until the 1980 introduction of the D9L. In 1956, the D9 had its engine power raised to Template:Convert. The new Template:Convert D9E replaced that model in 1959. Two years later, the legendary Template:Convert D9G was introduced; it remained in production for 13 years; it became the main crawler on many job sites, testifying to its sturdiness and design.
In 1965, West Coast businessman Buster Peterson hooked up a pair of D9Gs to pushload the largest wheel tractor scrapers built. In 1968, Caterpillar bought the rights to this concept, thus the Template:Convert DD9G was created (DD stands for Dual D9G).<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Peterson also built the first SxS D9G, which has two D9Gs side-by-side, pushing a Template:Convert-wide bulldozer blade.
In 1969, Caterpillar introduced this new SxS D9G. In 1974, the improved Template:Convert D9H was introduced to replace the D9G. The D9H is still the most powerful conventional track-type tractor in company history. The DD9H and the SxS D9H soon followed.
In 1980, the Template:Convert D9L was introduced. The unit featured the same new type of elevated drive sprocket undercarriage as had been introduced on the larger D10 in 1977.Template:Efn-lr The new undercarriage design reduced strain and shock loads on the final drives<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> and gave the "belly pan" more ground clearance. The elevated-drive-sprocket undercarriage is a modular design. To repair the machines, one breaks down the tracks and pulls the drive sprockets out. As a result, one can pull the powershift transmission out of the rear.
The D9L was replaced by the Template:Convert D10N in 1987. The Template:Convert D9N replaced D8L in 1987 (this was due to a model number/size adjustment by Caterpillar in their larger bulldozer lineup at the time, allowing them to introduce a smaller D8N model below the larger D8L size). Due to the model adjustment, the D9L is the most powerful D9 in history, with a flywheel power of Template:Convert. The D9L is also the heaviest D9 in history at Template:Convert.
In 1988, Caterpillar produced their 25,000th elevated-drive-sprocket track-type tractor, a D9N. The Template:Convert D9R replaced the D9N in 1996. The Template:Convert D9T replaced the D9R in 2004. The main difference between the D9T and the D9R is the installment of the new Cat C18 ACERT inline-six engine in the D9T vs the V8 3408 HEUI in the D9R. The D9R has clutch and brake steering, while the D9T has differential steering. The D9T has a low-emissions ACERT diesel engine. The current model is the D9 (no letter); however, older models such as the D9T, D9R, D9N, and D9L are still commonly used. The L, N, R, and T models of the D9 are visually very similar, differing primarily in the design of their internal systems.
ToolsEdit
The D9's primary working tools are the blade, affixed to the front and controlled by four hydraulic cylinders, and an optional ripper in the rear.
The blade is mainly intended for earthmoving and bulk material handling: pushing up sand, soil, and rubble. It also can be used to push other heavy equipment such as earthmoving scraper pans, and in military applications, aid main battle tanks. The dozer blade usually has three variants:
- A straight blade ("S-blade") is short and has no lateral curve, with no side wings, and can be used for fine grading.
- A universal blade ("U-blade") is tall and very curved, and has large side wings to carry more material.
- A "S-U" combination blade is shorter, has less curvature, and has smaller side wings. This blade is typically used for pushing piles of large rocks, such as at a quarry.
The rear ripper is intended for use in loosening rocky ground and ripping out larger stones. It can also break frozen ground and excavate small ditches. The ripper can be replaced with a multi-shank ripper, allowing the bulldozer to comb the ground.
Like many other bulldozers, the D9 can be fitted with other devices, such as mine plows for clearing minefields.
Military applicationsEdit
Its armor allows it to work under heavy fire.
Caterpillar Inc. does not manufacture a military version of the D9. However, the attributes that make the D9 popular for major construction projects make it desirable for certain military applications.
The US Army used D9 bulldozers to clear forest in the Vietnam War, but after the war they were replaced with smaller and cheaper Caterpillar D7G bulldozers. D7G bulldozers are still very common in US combat engineering battalions; currentlyTemplate:When the US Army fields around 1300 D7r’s that are a combination of armored and non armored.Template:Cn A series of suggestions have been made to replace the lighter D7Gs with the newer and more heavily armored D9s.Template:Citation needed
Template:See also The Israel Defense Forces (IDF) have used the D9 since it was introduced.Template:Cn. The armored IDF Caterpillar D9 was introduced in 1986 on the D9L. Fitted with an Israeli-developed vehicle armor kit, and modified variously by the Israel Defense Forces, Israeli Military Industries and Israel Aerospace Industries, it has proven particularly effective.<ref name='Caterpillar D9 Armored'> {{#invoke:citation/CS1|citation |CitationClass=web }}Template:Dead link</ref>
IDF D9 bulldozers were used during the Second Intifada (2000–2005) to demolish Palestinian structures and clear improvised explosive devices. The Israeli armor provides protection from small arms and explosives, and the bulldozers were used the Battle of Jenin 2002 during Operation Defensive Shield. A 2003 incident involving an IDF D9, in which a 23-year-old American activist was killed, resulted in a lawsuit brought against Caterpillar, Inc. in the United States.<ref name=":0">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> The court dismissed the case on grounds that it was outside their jurisdiction, and that Israeli tort law was a sufficient avenue to pursue remedies.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref name=":0" />
The D9 remains one of the main combat engineering tools of the IDF, which currentlyTemplate:When deploys the D9L, D9N, D9R, and D9T. Most of the IDF's D9 fleet today are composed of the D9R with slat armor.Template:Citation needed.
A similarly modified armored D9 was also used by KBR in Iraq.Template:Citation needed
- IDF-D9-demolishes-Palestinian-structure-01.jpg
IDF Caterpillar D9L razing a Palestinian house
- D9-IDF-1460a.jpg
IDF Caterpillar D9R pushing soil for an earthworks.
See alsoEdit
ReferencesEdit
External linksEdit
- Caterpillar D-Series Track-Type Tractors – Official Caterpillar website
- Army's new D9 bulldozer digs into duty in Kuwait – The US army tests the armoured D9R for the Iraqi campaign