Template:Refimprove Template:Infobox information appliance ES PEVM (ЕС ПЭВМ) was a Soviet clone of the IBM PC in the 1980s. The ES PEVM models lineup also included analogues of IBM PC XT, IBM PC AT, IBM XT/370.

The computers and software were adapted in Minsk, Belarus, at the Scientific Research Institute of Electronic Computer Machines (НИИ ЭВМ).

They were manufactured in Minsk as well, at Minsk Production Group for Computing Machinery (Минское производственное объединение вычислительной техники (МПО ВТ)).

DescriptionEdit

File:EC1834 k6313 1024px.jpg
EC-1834 with monitor K-7229.25 and printer K-6313
File:EC1835 C IO Adapter.jpg
EC-1835 I/O adapter

The first models of ES PEVM (ES-1840, ES-1841, ES-1842), unlike the IBM PC, had two units: a system unit and a floppy drives unit. These models used a backplane instead of the main board. Although the system bus was compatible with ISA bus, it used a different type of connector, so the IBM PC expansion cards could not be installed in ES PEVM.<ref name=mpss1>Template:Cite magazine</ref> Later models (ES-1843, ES-1849 etc.) were fully-compatible with IBM PC XT and IBM PC AT.

Unlike IBM PC using the Intel 8088 processor, the early ES PEVM models used K1810VM86 processor with a 16-bit bus and a clock frequency of 5 MHz. The processor was placed on a separate board. Early versions of the board did not have a socket for the floating point coprocessor.

The following boards were produced for ES-1840 and ES-1841:<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

  • CPU board (containing 54 chips). It was installed in every configuration of the computer.
  • 128 KiB RAM board. It was installed in early models of ES PEVM.
  • 512 KiB RAM board (containing 110 chips). Variants with 256 KiB or 128 Kib were available.
  • MDA adapter board (containing 91 chips). It was built using the Bulgarian CM607 chip (MC6845 clone).
  • CGA adapter board (containing 94 chips).
  • Floppy drive adapter board (containing 32 chips). It was built using the Bulgarian CM609 chip (Intel 8272 clone).
  • Serial interface adapter board (containing 56 chips). It was electrically incompatible with the IBM PC COM port and was not supported in the BIOS.

Volume of production for a number of models:<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

Model name Year of production start Year of production end Volume of production (units)
ES-1831 1986 Template:?
ES-1832 1986 Template:?
ES-1834 1986 1989 13799
ES-1835 1989 Template:?
ES-1838 1988 Template:?
ES-1839 1987 Template:?
ES-1840 1986 1989 7461
ES-1841 1987 1995 83937
ES-1842 1988 1996 10193
ES-1843 1990 1993 3012
ES-1845 1988 Template:?
ES-1847 1988 Template:?
ES-1849 1990 1997 4966
ES-1850 1989 Template:?
ES-1851 1991 1997 3142
ES-1855 1991 Template:?
ES-1861 Template:?
ES-1862 Template:?
ES-1863 1991 1997 3069
ES-1864 1991 Template:?
ES-1865 1992 Template:?

SoftwareEdit

The computers were shipped with AlphaDOS, an entirely Russified version of MS-DOS/PC DOS 2.x and 3.x. All commands were entered in Russian, for example, СМЕНКАТ for CHDIR. Files and file extensions were also in Russian, such as АТРИБ.ИСП for ATTRIB.EXE. The operating system used the main code page, hardwired into the display ROM; it was compatible neither with CP 866 nor CP 855, although partially with ISO/IEC 8859-5.

ReliabilityEdit

Early models of ES PEVM were prone to failures due to manufacturing defects. The mean time between failures was around 350 hours.<ref name=mpss1 />

See alsoEdit

ReferencesEdit

Template:Reflist

Template:List of Soviet computer systems

Template:Asbox