HMS Wivern (1863)
Template:Short description Template:Other ships Template:Use dmy dates Template:Use British English
Template:Infobox ship imageTemplate:Infobox ship careerTemplate:Infobox ship characteristicsThe first HMS Wivern was an ironclad turret ship built at Birkenhead, England. She was one of two sister ships secretly ordered from the John Laird Sons & Company shipyard in 1862 by the Confederate States of America.
Her true ownership was concealed by the fiction that she was being built as the Egyptian warship El Monassir. She was to have been named CSS Mississippi upon delivery to the Confederacy. Her sister was built under the false name El Tousson and was to have been renamed CSS North Carolina. In October 1863, a few months after their launch and before they could be completed, the UK Government seized the two ironclads.
In 1864, the Admiralty bought them and commissioned them into the Royal Navy: El Monassir as HMS Wivern and El Tousson as Template:HMS. Wivern had a long Royal Navy career, until she was scrapped in Hong Kong in 1922.
Design and descriptionEdit
Mississippi and her sister were intended, together with other warships, to break the Federal blockade of Confederate coastal cities and to hold some Northern cities for ransom.<ref name=s4>Scharf, p. 784</ref> The ships had a length between perpendiculars of Template:Convert, a beam of Template:Convert,<ref name=g0>Gardiner, p. 20</ref> and a draught of Template:Convert at deep load. They displaced Template:Convert. The hull was divided by 12 watertight bulkheads and the ships had a double bottom beneath the engine and boiler rooms. Their crew consisted of 152 officers and ratings.<ref name=p8>Parkes, p. 78</ref>
The Scorpion-class ships had two horizontal direct-acting steam engines, built by Lairds, each driving a single propeller shaft, using steam provided by four tubular boilers. The engines produced a total of Template:Convert which gave the ships a maximum speed of Template:Convert.<ref name=p8/> Wivern reached a maximum speed just over Template:Convert during her sea trials on 4 October 1865.<ref name=p14>Putnam, p. 14</ref> The ships carried Template:Convert of coal, enough to steam Template:Convert at Template:Convert.<ref name=p8/> They were barque-rigged with three masts. Wivern was the first ship to have tripod masts to reduce interference with the firing arcs of the gun turrets.<ref name=g0/> The funnel was made semi-retractable to reduce wind resistance while under sail.<ref name=p9>Parkes, p. 79</ref>
No ordnance had been ordered by the Confederates before the ships were seized in 1863, but in British service they mounted a pair of 9-inch rifled muzzle-loading guns in each turret. The guns could fire both solid shot and explosive shells.<ref>Gardiner, p. 6</ref> According to Parkes, going from full depression to full elevation supposedly took one hour in smooth water and with an even keel!<ref name=p9/>
The Scorpion-class ships had a complete waterline belt of wrought iron that was Template:Convert thick amidships and thinned to Template:Convert at the bow and Template:Convert at the stern. It completely covered the hull from the upper deck to Template:Convert below the waterline.<ref name=g0/> The armour protection of the turrets was quite elaborate. The inside of the turret was lined with Template:Convert of iron boiler plate to which T-shaped beams were bolted. The space between the beams was filled with Template:Convert of teak. This was covered by an iron lattice Template:Convert thick that was covered in turn by Template:Convert of teak. The Template:Convert iron plates were bolted to the outside using bolts that ran through to the interior iron "skin". The area around the gun ports was reinforced by 4.5-inch plates to give a total thickness of 10 inches. The turret roof consisted of T-shaped beams covered by Template:Convert iron plates.<ref name=p11>Putnam, p. 11</ref>
Construction and careerEdit
The British government seized the pair of ironclads in October 1863, before they could be completed. In early 1864, the Admiralty purchased both for the Royal Navy. Completed in October 1865, Wivern was assigned to the Channel Fleet until 1868. After a refit that reduced her sailing rig from a barque to a schooner, the ship served briefly as a guard ship at Hull and then went into reserve. In 1880 she was dispatched to Hong Kong to serve as the station guard ship there.
The naval architect Edward James Reed wrote: "the turret-ship 'Wivern', belonging to the Royal Navy, has a low free-board (about 4 feet), and is very lightly armoured, while her armament is also very light. Yet on one occasion her behaviour at sea was so bad that she had to be brought head to wind in order to prevent her shipping large, and, of course, dangerous, quantities of water, the extreme angle of roll rising to 27 degrees each way."<ref>Pages 138-9 Reed, Edward J Our Ironclad Ships, their Qualities, Performance and Cost, published John Murray, 1869.</ref>
One of her commanding officers was Captain Hugh Talbot Burgoyne, VC who was later appointed the commanding officer of Template:HMS. Wivern remained in Hong Kong until sold for scrap in 1922, having been reduced to harbor duties from 1904.