Invar

Template:Short description Template:Use dmy dates

Samples of Invar

The coefficient of thermal expansion of nickel/iron alloys is plotted here against the nickel percentage (on a mass basis) in the alloy. The sharp minimum occurs at the Invar ratio of 36% Ni.

Invar, also known generically as FeNi36 (64FeNi in the US), is a nickel–iron alloy notable for its uniquely low coefficient of thermal expansion (CTE or α). The name Invar comes from the word invariable, referring to its relative lack of expansion or contraction with temperature changes,<ref name="alloying">Template:Cite book</ref> and is a registered trademark of ArcelorMittal.<ref>US Trademark #63970</ref>

The discovery of the alloy was made in 1895 by Swiss physicist Charles Édouard Guillaume for which he received the Nobel Prize in Physics in 1920. It enabled improvements in scientific instruments.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

PropertiesEdit

Like other nickel/iron compositions, Invar is a solid solution; that is, it is a single-phase alloy. In one commercial grade called Invar 36 it consists of approximately 36% nickel and 64% iron,<ref name=vdm>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> has a melting point of Template:Cvt, a density of Template:Val and a resistivity of Template:Val.<ref name="am1">Template:Cite news</ref> The invar range was described by Westinghouse scientists in 1961 as "30–45 atom per cent nickel".<ref name="peavler61">Template:Cite journal</ref>

Common grades of Invar have a coefficient of thermal expansion (denoted α, and measured between 20 °C and 100 °C) of about 1.2 × 10⁻⁶ K⁻¹ (Template:Val), while ordinary steels have values of around 11–15 ppm/°C.Template:Cn Extra-pure grades (<0.1% Co) can readily produce values as low as 0.62–0.65 ppm/°C.Template:Cn Some formulations display negative thermal expansion (NTE) characteristics.Template:Cn Though it displays high dimensional stability over a range of temperatures, it does have a propensity to creep.<ref>Template:Cite journal</ref><ref>Template:Cite journal</ref>

Historically, the paramagnetic properties of certain iron-nickel alloys were first identified as a unique characteristic. These alloys exhibit a coexistence of two types of structures, whose proportions vary depending on temperature.<ref name=Weiss1963>Template:Cite journal</ref><ref>Template:Cite journal</ref><ref>Template:Cite journal</ref> One of these structures is characterized by a high magnetic moment (ranging from Template:Val) and a high lattice parameter, adhering to Hund's rules. The other structure, in contrast, has a low magnetic moment (ranging from Template:Val) and a low lattice parameter. When exposed to a variable magnetic field, this dual-structure nature induces dimensional changes in the alloy. This phenomenon is particularly significant in the case of Invar alloys, which are renowned for their exceptional dimensional stability over a wide range of temperatures. However, to maintain this stability, it is crucial to avoid exposing the material to magnetic fields, as such exposure can disrupt the delicate balance between the two structures and lead to undesirable dimensional variations.

In recent years, advancements in material science have led to the development of non-ferromagnetic Invar alloys. These innovative materials have opened up new possibilities for applications in cutting-edge fields such as the semiconductor industry and aerospace engineering.<ref>Template:Cite book</ref><ref>Template:Cite book</ref> By eliminating the influence of magnetic fields on dimensional stability, non-ferromagnetic Invar alloys have the potential to significantly enhance the performance of optical instruments and other precision devices.

ApplicationsEdit

Invar is used where high dimensional stability is required, such as precision instruments, clocks, seismic creep gauges, color-television tubes' shadow-mask frames,<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> valves in engines and large aerostructure molds.<ref>Template:Citation</ref>

One of its first applications was in watch balance wheels and pendulum rods for precision regulator clocks. At the time it was invented, the pendulum clock was the world's most precise timekeeper, and the limit to timekeeping accuracy was due to thermal variations in length of clock pendulums. The Riefler regulator clock developed in 1898 by Clemens Riefler, the first clock to use an Invar pendulum, had an accuracy of 10 milliseconds per day, and served as the primary time standard in naval observatories and for national time services until the 1930s.

In land surveying, when first-order (high-precision) elevation leveling is to be performed, the level staff (leveling rod) used is made of Invar, instead of wood, fiberglass, or other metals.<ref>Template:Cite book</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Invar struts were used in some pistons to limit their thermal expansion inside their cylinders.<ref>Template:Cite book</ref> In the manufacture of large composite material structures for aerospace carbon fibre layup molds, Invar is used to facilitate the manufacture of parts to extremely tight tolerances.<ref>Tooling to mould and die for! Template:Webarchive, Mike Richardson, Aerospace Manufacturing, 6 April 2018, accessed 10 April 2018.</ref><ref>Template:Cite book</ref>

In the astronomical field, Invar is used as the structural components that support dimension-sensitive optics of astronomical telescopes.<ref>Template:Cite book</ref> Superior dimensional stability of Invar allows the astronomical telescopes to significantly improve the observation precision and accuracy.

VariationsEdit

There are variations of the original Invar material that have slightly different coefficient of thermal expansion such as:

Inovco, which is Fe–33Ni–4.5Co and has an α of 0.55 ppm/°C (from 20 to 100 °C).Template:Cn Template:Examples
FeNi42 (for example NILO alloy 42), which has a nickel content of 42% and Template:Nowrap, matching that of silicon, is widely used as lead frame material for integrated circuits, etc.Template:Cn
FeNiCo alloys—named Kovar or Dilver P—that have the same expansion behaviour (~Template:Nowrap) and form strong bonds with molten borosilicate glass, and because of that are used for glass-to-metal seals, and to support optical parts in a wide range of temperatures and applications, such as satellites.Template:Cn
Elinvar has a near-constant modulus of elasticity, making it valuable for wristwatch balance wheels, spring scales, and other spring-based measuring instruments.

Explanation of anomalous propertiesEdit

A detailed explanation of Invar's anomalously low CTE has proven elusive for physicists.

All the iron-rich face-centered cubic Fe–Ni alloys show Invar anomalies in their measured thermal and magnetic properties that evolve continuously in intensity with varying alloy composition. Scientists had once proposed that Invar's behavior was a direct consequence of a high-magnetic-moment to low-magnetic-moment transition occurring in the face centered cubic Fe–Ni series (and that gives rise to the mineral antitaenite); however, this theory was proven incorrect.<ref>Template:Cite journal</ref> Instead, it appears that the low-moment/high-moment transition is preceded by a high-magnetic-moment frustrated ferromagnetic state in which the Fe–Fe magnetic exchange bonds have a large magneto-volume effect of the right sign and magnitude to create the observed thermal expansion anomaly.<ref>Template:Cite journal</ref>

Wang et al. considered the statistical mixture between the fully ferromagnetic (FM) configuration and the spin-flipping configurations (SFCs) in Template:Chem with the free energies of FM and SFCs predicted from first-principles calculations and were able to predict the temperature ranges of negative thermal expansion under various pressures.<ref>Wang, Y., Shang, S. L., Zhang, H., Chen, L.-Q., & Liu, Z.-K. (2010). Thermodynamic fluctuations in magnetic states: Fe 3 Pt as a prototype. Philosophical Magazine Letters, 90(12), 851–859. https://doi.org/10.1080/09500839.2010.508446</ref> It was shown that all individual FM and SFCs have positive thermal expansion, and the negative thermal expansion originates from the increasing populations of SFCs with smaller volumes than that of FM.<ref>Template:Cite journal</ref>

ReferencesEdit

Template:Reflist