Pan frying
Template:Short description Template:Refimprove
Pan frying or pan-frying is a form of frying food characterized by the use of minimal cooking oil or fat (compared to shallow frying or deep frying), typically using just enough to lubricate the pan.<ref name="McGinnis 2006"/> In the case of a greasy food such as bacon, no oil or fats may need to be added. As a form of frying, the technique relies on oil or fat as the heat transfer medium,<ref name="McGinnis 2006"/> and on correct temperature and time to not overcook or burn the food.<ref name="Boskou Elmadfa 2016"/> Pan frying can serve to retain the moisture in foods such as meat and seafood.<ref name="Publishing 2005 p. 198"/> The food is typically flipped at least once to ensure that both sides are cooked properly.<ref name="Kho Horton 2015"/>
SpecificsEdit
Pan frying takes place at lower heat than sautéing.<ref name="Gisslen Griffin Bleu 2006"/><ref name="Brown 2014"/> This is because the food to be pan fried – such as chicken breasts, steak, pork chops, or fish fillets – is not cut into small pieces before cooking. It requires a lower heat so that the exterior of the food does not overcook by the time the interior reaches the proper temperature, and to keep foods in a moister state.<ref name="Gisslen Griffin Bleu 2006"/> However, the oil should always be hot enough to ensure that the moisture in the food can escape in the form of steam; the force of the steam escaping keeps the oil from soaking into the food.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> The same amount of oil is used as for sautéing – just enough to glaze the pan.
EquipmentEdit
Generally, a shallower cooking vessel is used for pan frying than for deep frying; however, using a deep pan with a small amount of oil, butter or bacon grease does reduce spatter. A denser cooking vessel is better than a less dense pan because the added mass will improve temperature regulation. An electric skillet can be used analogously to an electric deep fryer, and many of these devices have a thermostat to keep the liquid (in this case, oil) at the desired temperature.
BreadingEdit
Foods to be pan fried are sometimes covered with a batter or breading.<ref name="Gisslen 2010"/><ref name="Marcus 2013"/> Batters consist of dried ingredients such as flour or cornstarch in conjunction with liquids such as milk, water or other beverages. Breading can be as simple as dusting the food in flour or, more commonly, what is called the "standard breading procedure",<ref name="Gisslen 2010"/> which involves first dusting the food in flour (taking care to shake off the excess), then dipping it in beaten eggs, and finally putting it into bread crumbs (or some other form of outer coating).<ref name="Gisslen 2010"/> The food is seasoned with salt and pepper prior to applying any coating. Allowing the food to rest for 15–30 minutes before frying but after applying the breading enables the coating to stick to the food with greater tenacity.