Scandium

Template:Redirect Template:Pp-move Template:Infobox scandium Scandium is a chemical element; it has symbol Sc and atomic number 21. It is a silvery-white metallic d-block element. Historically, it has been classified as a rare-earth element,<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> together with yttrium and the lanthanides. It was discovered in 1879 by spectral analysis of the minerals euxenite and gadolinite from Scandinavia.<ref>Template:Citation</ref>

Scandium is present in most of the deposits of rare-earth and uranium compounds, but it is extracted from these ores in only a few mines worldwide. Because of the low availability and difficulties in the preparation of metallic scandium, which was first done in 1937, applications for scandium were not developed until the 1970s, when the positive effects of scandium on aluminium alloys were discovered. Its use in such alloys remains its only major application. The global trade of scandium oxide is 15–20 tonnes per year.<ref name="USGS">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

The properties of scandium compounds are intermediate between those of aluminium and yttrium. A diagonal relationship exists between the behavior of magnesium and scandium, just as there is between beryllium and aluminium. In the chemical compounds of the elements in group 3, the predominant oxidation state is +3.

Properties

Chemical characteristics

Scandium is a soft metal with a silvery appearance. It develops a slightly yellowish or pinkish cast when oxidized by air. It is susceptible to weathering and dissolves slowly in most dilute acids. It does not react with a 1:1 mixture of nitric acid (Template:Chem2) and 48.0% hydrofluoric acid (Template:Chem2), possibly due to the formation of an impermeable passive layer. Scandium turnings ignite in the air with a brilliant yellow flame to form scandium oxide.<ref>"Scandium." Los Alamos National Laboratory. Retrieved 2013-07-17.</ref>

Isotopes

{{#invoke:Labelled list hatnote|labelledList|Main article|Main articles|Main page|Main pages}} In nature, scandium is found exclusively as the isotope ⁴⁵Sc, which has a nuclear spin of Template:Frac; this is its only stable isotope.<ref name=Meierfrankenfeld2011>Template:Cite journal</ref>

The known isotopes of scandium range from ³⁷Sc to ⁶²Sc.Template:NUBASE2020 The most stable radioisotope is ⁴⁶Sc, which has a half-life of 83.8 days. Others are ⁴⁷Sc, 3.35 days; the positron emitter ⁴⁴Sc, 4 hours; and ⁴⁸Sc, 43.7 hours. All of the remaining radioactive isotopes have half-lives less than 4 hours, and the majority of them have half-lives less than 2 minutes. The low mass isotopes are very difficult to create.<ref name=Meierfrankenfeld2011/> The initial detection of ³⁷Sc and ³⁸Sc only resulted in the characterization of their mass excess.<ref name="37,38Sc">Template:Cite journal</ref><ref>Latest discovered isotopes, Discovery of Nuclides Project</ref> Scandium also has five nuclear isomers: the most stable of these is ^44m2Sc (t_1/2 = 58.6 h).<ref name="Audi">Template:Cite journal</ref>

The primary decay mode of ground-state scandium isotopes at masses lower than the only stable isotope, ⁴⁵Sc, is electron capture (or positron emission), but the lightest isotopes (³⁷Sc to ³⁹Sc) undergo proton emission instead, all three of these producing calcium isotopes. The primary decay mode at masses above ⁴⁵Sc is beta emission, producing titanium isotopes.Template:NUBASE2020

Occurrence

In Earth's crust, scandium is not rare. Estimates vary from 18 to 25 ppm, which is comparable to the abundance of cobalt (20–30 ppm). Scandium is only the 50th most common element on Earth (35th most abundant element in the crust), but it is the 23rd most common element in the Sun<ref name="rubber">Template:Cite book</ref> and the 26th most abundant element in the stars.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> However, scandium is distributed sparsely and occurs in trace amounts in many minerals.<ref>Template:Cite book</ref> Rare minerals from Scandinavia<ref name="Thort">Template:Cite journal</ref> and Madagascar<ref name="Mada">Template:Cite journal</ref> such as thortveitite, euxenite, and gadolinite are the only known concentrated sources of this element. Thortveitite can contain up to 45% of scandium in the form of scandium oxide.<ref name="Thort" />

The stable form of scandium is created in supernovas via the r-process.<ref>Template:Cite journal</ref> Also, scandium is created by cosmic ray spallation of the more abundant iron nuclei.

• ²⁸Si + 17n → ⁴⁵Sc (r-process)
• ⁵⁶Fe + p → ⁴⁵Sc + ¹¹C + n (cosmic ray spallation)

Production

The world production of scandium is in the order of 15–20 tonnes per year, in the form of scandium oxide. The demand is slightly higher,<ref>Template:Cite journal</ref> and both the production and demand keep increasing. In 2003, only three mines produced scandium: the uranium and iron mines in Zhovti Vody in Ukraine, the rare-earth mines in Bayan Obo, China, and the apatite mines in the Kola Peninsula, Russia.Template:Citation needed Since then, many other countries have built scandium-producing facilities, including 5 tonnes/year (7.5 tonnes/year Template:Chem2) by Nickel Asia Corporation and Sumitomo Metal Mining in the Philippines.<ref name="SMMPressRelease">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref name="SMMAbstract">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> In the United States, NioCorp Development hopesTemplate:When to raise $1 billion<ref>Template:Cite press release</ref> toward opening a niobium mine at its Elk Creek site in southeast Nebraska,<ref>Template:Cite news</ref> which may be able to produce as much as 95 tonnes of scandium oxide annually.<ref>Template:Citation</ref> In each case, scandium is a byproduct of the extraction of other elements and is sold as scandium oxide.<ref name="Deschamps">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref name="USGS2015">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref name="usgs">Scandium. USGS.</ref>

To produce metallic scandium, the oxide is converted to scandium fluoride and then reduced with metallic calcium.<ref>Template:Cite journal</ref>

• Template:Chem2
• Template:Chem2

Madagascar and the Iveland-Evje region in Norway have the only deposits of minerals with high scandium content, thortveitite Template:Chem2), but these are not being exploited.<ref name="USGS2015" /> The mineral kolbeckite Template:Chem2 has a very high scandium content but is not available in any larger deposits.<ref name="USGS2015" />

The absence of reliable, secure, stable, long-term production has limited the commercial applications of scandium. Despite this low level of use, scandium offers significant benefits. Particularly promising is the strengthening of aluminium alloys with as little as 0.5% scandium.<ref>Template:Cite journal</ref> Scandium-stabilized zirconia enjoys a growing market demand for use as a high-efficiency electrolyte in solid oxide fuel cells.Template:Cn

The USGS reports that, from 2015 to 2019 in the US, the price of small quantities of scandium ingot has been $107 to $134 per gram, and that of scandium oxide $4 to $5 per gram.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

Compounds

Template:Category see also Scandium chemistry is almost completely dominated by the trivalent ion, Sc³⁺. The radii of M³⁺ ions in the table below indicate that the chemical properties of scandium ions have more in common with yttrium ions than with aluminium ions. In part because of this similarity, scandium is often classified as a lanthanide-like element.<ref>Template:Cite book</ref>

Ionic radius (pm)

Al	Sc	Y	La	Lu
53.5	74.5	90.0	103.2	86.1

Oxides and hydroxides

The oxide [[scandium oxide|Template:Chem]] and the hydroxide Template:Chem are amphoteric:<ref>Template:Cite book</ref>

Template:Chem + 3 Template:Chem → Template:Chem (scandate ion)

Template:Chem + 3 Template:Chem + 3 Template:Chem → Template:Chem

α- and γ-ScOOH are isostructural with their aluminium hydroxide oxide counterparts.<ref>Template:Cite journal</ref> Solutions of Template:Chem in water are acidic due to hydrolysis.

Halides and pseudohalides

The halides Template:Chem2, where X= Cl, Br, or I, are very soluble in water, but [[scandium fluoride|Template:Chem2]] is insoluble. In all four halides, the scandium is 6-coordinated. The halides are Lewis acids; for example, [[scandium fluoride|Template:Chem2]] dissolves in a solution containing excess fluoride ion to form Template:Chem2. The coordination number 6 is typical for Sc(III). In the larger Y³⁺ and La³⁺ ions, coordination numbers of 8 and 9 are common. Scandium triflate is sometimes used as a Lewis acid catalyst in organic chemistry.<ref>Template:Cite journal</ref>

Organic derivatives

{{#invoke:Labelled list hatnote|labelledList|Main article|Main articles|Main page|Main pages}} Scandium forms a series of organometallic compounds with cyclopentadienyl ligands (Cp), similar to the behavior of the lanthanides. One example is the chlorine-bridged dimer, Template:Chem2 and related derivatives of pentamethylcyclopentadienyl ligands.<ref>Template:Cite journal</ref>

Uncommon oxidation states

Compounds that feature scandium in oxidation states other than +3 are rare but well characterized. The blue-black compound Template:Chem2 is one of the simplest. This material adopts a sheet-like structure that exhibits extensive bonding between the scandium(II) centers.<ref>Template:Cite journal</ref> Scandium hydride is not well understood, although it appears not to be a saline hydride of Sc(II).<ref name="McGuire" /> As is observed for most elements, a diatomic scandium hydride has been observed spectroscopically at high temperatures in the gas phase.<ref name="Smith" /> Scandium borides and carbides are non-stoichiometric, as is typical for neighboring elements.<ref name="Holleman">Holleman, A. F.; Wiberg, E. "Inorganic Chemistry" Academic Press: San Diego, 2001. Template:ISBN.</ref>

Lower oxidation states (+2, +1, 0) have also been observed in organoscandium compounds.<ref>Template:Cite journal</ref><ref name="Cloke1991"/><ref>Template:Cite journal</ref><ref>Template:Cite journal</ref>

History

Dmitri Mendeleev, who is referred to as the father of the periodic table, predicted the existence of an element ekaboron, with an atomic mass between 40 and 48 in 1869. Lars Fredrik Nilson and his team detected this element in the minerals euxenite and gadolinite in 1879. Nilson prepared 2 grams of scandium oxide of high purity.<ref name="Nilsonfr">Template:Cite journal</ref><ref name="Nilsonde">Template:Cite journal</ref> He named the element scandium, from the Latin Scandia meaning "Scandinavia". Nilson was apparently unaware of Mendeleev's prediction, but Per Teodor Cleve recognized the correspondence and notified Mendeleev.<ref>Template:Cite journal</ref><ref name="Weeks">Template:Cite book</ref>

Metallic scandium was produced for the first time in 1937 by electrolysis of a eutectic mixture of potassium, lithium, and scandium chlorides, at 700–800 °C.<ref>Template:Cite journal</ref> The first pound of 99% pure scandium metal was produced in 1960. Production of aluminium alloys began in 1971, following a US patent.<ref>Burrell, A. Willey Lower "Aluminum scandium alloy" {{#if:3,619,181 |[{{#ifeq:|uspto|http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=%7Chttps://patents.google.com/patent/US}}{{#iferror:{{#expr:3619181 }}|3619181}} U.S. patent {{#ifeq:Template:Replace|Template:Digits|Template:Replace|3,619,181}}] |{{US patent|123456|link text}}}} issued on November 9, 1971.</ref> Aluminium-scandium alloys were also developed in the USSR.<ref name="Zark">Template:Cite journal</ref>

Laser crystals of gadolinium-scandium-gallium garnet (GSGG) were used in strategic defense applications developed for the Strategic Defense Initiative (SDI) in the 1980s and 1990s.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>Template:Cite journalTemplate:Dead link</ref>

Applications

Aluminium alloys

{{#invoke:Labelled list hatnote|labelledList|Main article|Main articles|Main page|Main pages}}

File:Mig-29 on landing.jpg

Parts of the MiG-29 are made from Al-Sc alloy.<ref name="Ahmad2003">Template:Cite journal</ref>

The main application of scandium by weight is in aluminium-scandium alloys for minor aerospace industry components. These alloys contain between 0.1% and 0.5% of scandium. They were used in Russian military aircraft, specifically the Mikoyan-Gurevich MiG-21 and MiG-29.<ref name="Ahmad2003" />

The addition of scandium to aluminium limits the grain growth in the heat zone of welded aluminium components. This has two beneficial effects: the precipitated Template:Chem2 forms smaller crystals than in other aluminium alloys,<ref name="Ahmad2003" /> and the volume of precipitate-free zones at the grain boundaries of age-hardening aluminium alloys is reduced.<ref name="Ahmad2003" /> The Template:Chem2 precipitate is a coherent precipitate that strengthens the aluminum matrix by applying elastic strain fields that inhibit dislocation movement (i.e., plastic deformation). Template:Chem2 has an equilibrium L1₂ superlattice structure exclusive to this system.<ref>Template:Cite journal</ref>

A fine dispersion of nano scale precipitate can be achieved via heat treatment that can also strengthen the alloys through order hardening.<ref>Template:Cite journal</ref> Recent developments include the additions of transition metals such as zirconium (Zr) and rare earth metals like erbium (Er) produce shells surrounding the spherical Template:Chem2 precipitate that reduce coarsening.<ref>Template:Cite journal</ref>

These shells are dictated by the diffusivity of the alloying element and lower the cost of the alloy due to less Sc being substituted in part by Zr while maintaining stability and less Sc being needed to form the precipitate.<ref>Template:Cite journal</ref> These have made Template:Chem2 somewhat competitive with titanium alloys along with a wide array of applications. However, titanium alloys, which are similar in lightness and strength, are cheaper and much more widely used.<ref name="Schwarz2004">Template:Cite book</ref>

The alloy Template:Chem2 is as strong as titanium, light as aluminium, and hard as some ceramics.<ref>Template:Cite journal</ref>

Some items of sports equipment, which rely on lightweight high-performance materials, have been made with scandium-aluminium alloys, including baseball bats,<ref name="bat">Template:Cite journal</ref> tent poles and bicycle frames and components.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Lacrosse sticks are also made with scandium. The American firearm manufacturing company Smith & Wesson produces semi-automatic pistols and revolvers with frames of scandium alloy and cylinders of titanium or carbon steel.<ref name="James2004">Template:Cite bookTemplate:Dead link</ref><ref name="Sweeney2004">Template:Cite bookTemplate:Dead link</ref>

Since 2013, Apworks GmbH, a spin-off of Airbus, have marketed a high strength Scandium containing aluminium alloy processed using metal 3D-Printing (Laser Powder Bed Fusion) under the trademark Scalmalloy which claims very high strength & ductility.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

Light sources

The first scandium-based metal-halide lamps were patented by General Electric and made in North America, although they are now produced in all major industrialized countries. Approximately 20 kg of scandium (as Template:Chem2) is used annually in the United States for high-intensity discharge lamps.<ref name="CRC">Hammond, C. R. in CRC Handbook of Chemistry and Physics 85th ed., Section 4; The Elements.</ref> One type of metal-halide lamp, similar to the mercury-vapor lamp, is made from scandium triiodide and sodium iodide. This lamp is a white-light source with high color rendering index that sufficiently resembles sunlight to allow good color-reproduction with TV cameras.<ref>Template:Cite book</ref> About 80 kg of scandium is used in metal-halide lamps/light bulbs globally per year.<ref>Template:Cite journal</ref>

Dentists use erbium-chromium-doped yttrium-scandium-gallium garnet (Template:Chem2) lasers for cavity preparation and in endodontics.<ref>Template:Cite book</ref>

Other

The radioactive isotope ⁴⁶Sc is used in oil refineries as a tracing agent.<ref name="CRC" /> Scandium triflate is a catalytic Lewis acid used in organic chemistry.<ref>Template:Cite journal</ref>

The 12.4 keV nuclear transition of ⁴⁵Sc has been studied as a reference for timekeeping applications, with a theoretical precision as much as three orders of magnitude better than the current caesium reference clocks.<ref name="Shvyd'ko 2023">Template:Cite journal</ref>

Scandium has been proposed for use in solid oxide fuel cells (SOFCs) as a dopant in the electrolyte material, typically zirconia (ZrO₂).<ref>Template:Cite journal</ref> Scandium oxide (Sc₂O₃) is one of several possible additives to enhance the ionic conductivity of the zirconia, improving the overall thermal stability, performance and efficiency of the fuel cell.<ref>Template:Cite journal</ref> This application would be particularly valuable in clean energy technologies, as SOFCs can utilize a variety of fuels and have high energy conversion efficiencies.<ref>Template:Cite journal</ref>

Health and safety

Elemental scandium is considered non-toxic, though extensive animal testing of scandium compounds has not been done.<ref>Template:Cite book</ref> The median lethal dose (LD₅₀) levels for scandium chloride for rats have been determined as 755 mg/kg for intraperitoneal and 4 g/kg for oral administration.<ref>Template:Cite journal</ref> In the light of these results, compounds of scandium should be handled as compounds of moderate toxicity. Scandium appears to be handled by the body in a manner similar to gallium, with similar hazards involving its poorly soluble hydroxide.<ref>Template:Cite journal</ref>

Further reading

• Template:Cite book

External links

• Scandium at The Periodic Table of Videos (University of Nottingham)
• WebElements.com – Scandium
• Template:Cite EB1911