Tractrix
In geometry, a tractrix (Template:Ety; plural: tractrices) is the curve along which an object moves, under the influence of friction, when pulled on a horizontal plane by a line segment attached to a pulling point (the tractor) that moves at a right angle to the initial line between the object and the puller at an infinitesimal speed. It is therefore a curve of pursuit. It was first introduced by Claude Perrault in 1670, and later studied by Isaac Newton (1676) and Christiaan Huygens (1693).<ref>Template:Cite book, extract of page 345</ref>
Mathematical derivationEdit
Suppose the object is placed at Template:Math and the puller at the origin, so that Template:Mvar is the length of the pulling thread. (In the example shown to the right, the value of Template:Math is 4.) Suppose the puller starts to move along the Template:Mvar axis in the positive direction. At every moment, the thread will be tangent to the curve described by the object, so that it becomes completely determined by the movement of the puller. Mathematically, if the coordinates of the object are Template:Math, then by the Pythagorean theorem the Template:Nowrap of the puller is <math>y + \sqrt{a^2 - x^2}</math> . Writing that the slope of thread equals that of the tangent to the curve leads to the differential equation
- <math>\frac{dy}{dx} = -\frac{\sqrt{a^2-x^2}}{x}</math>
with the initial condition Template:Math. Its solution is
- <math>y = \int_x^a \frac{\sqrt{a^2-t^2}}{t}\,dt = \! a\ln{\frac{a+\sqrt{a^2-x^2}}{x}}-\sqrt{a^2-x^2} .</math>
If instead the puller moves downward from the origin, then the sign should be removed from the differential equation and therefore inserted into the solution. Each of the two solutions defines a branch of the tractrix; they meet at the cusp point Template:Math.
The first term of this solution can also be written
- <math>a \operatorname{arsech}\frac{x}{a}, </math>
where Template:Math is the inverse hyperbolic secant function.
Basis of the tractrixEdit
The essential property of the tractrix is constancy of the distance between a point Template:Mvar on the curve and the intersection of the tangent line at Template:Mvar with the asymptote of the curve.
The tractrix might be regarded in a multitude of ways:
- It is the locus of the center of a hyperbolic spiral rolling (without skidding) on a straight line.
- It is the involute of the catenary function, which describes a fully flexible, inelastic, homogeneous string attached to two points that is subjected to a gravitational field. The catenary has the equation Template:Math.
- The trajectory determined by the middle of the back axle of a car pulled by a rope at a constant speed and with a constant direction (initially perpendicular to the vehicle).
- It is a (non-linear) curve which a circle of radius Template:Math rolling on a straight line, with its center at the Template:Math axis, intersects perpendicularly at all times.
The function admits a horizontal asymptote. The curve is symmetrical with respect to the Template:Mvar-axis. The curvature radius is Template:Math.
A great implication that the tractrix had was the study of its surface of revolution about its asymptote: the pseudosphere. Studied by Eugenio Beltrami in 1868,<ref>Template:Cite journal As cited by Template:Cite book</ref> as a surface of constant negative Gaussian curvature, the pseudosphere is a local model of hyperbolic geometry. The idea was carried further by Kasner and Newman in their book Mathematics and the Imagination, where they show a toy train dragging a pocket watch to generate the tractrix.<ref>Template:Cite book</ref>
PropertiesEdit
- The curve can be parameterised by the equation <math>x = t - \tanh(t), y= 1/{\cosh(t)}</math>.<ref>Template:MacTutor</ref>
- Due to the geometrical way it was defined, the tractrix has the property that the segment of its tangent, between the asymptote and the point of tangency, has constant length Template:Mvar.
- The arc length of one branch between Template:Math and Template:Math is Template:Math.
- The area between the tractrix and its asymptote is Template:Math, which can be found using integration or Mamikon's theorem.
- The envelope of the normals of the tractrix (that is, the evolute of the tractrix) is the catenary (or chain curve) given by Template:Math.
- The surface of revolution created by revolving a tractrix about its asymptote is a pseudosphere.
- The tractrix is a transcendental curve; it cannot be defined by a polynomial equation.
Practical applicationEdit
In 1927, P. G. A. H. Voigt patented a horn loudspeaker design based on the assumption that a wave front traveling through the horn is spherical of a constant radius. The idea is to minimize distortion caused by internal reflection of sound within the horn. The resulting shape is the surface of revolution of a tractrix.<ref>Horn loudspeaker design pp. 4–5. (Reprinted from Wireless World, March 1974)</ref> Voigt's design removed the annoying "honk" characteristic from previous horn designs, especially conical horns, and thus revitalized interest in the horn loudspeaker.<ref>Template:Cite book</ref> Klipsch Audio Technologies has used the tractrix design for the great majority of their loudspeakers, and many loudspeaker designers returned to the tractrix in the 21st century, creating an audiophile market segment. The tractrix horn differs from the more common exponential horn in that it provides for a wider spread of high frequency energy, and it supports the lower frequencies more strongly.<ref>Template:Cite book</ref>
An important application is in the forming technology for sheet metal. In particular a tractrix profile is used for the corner of the die on which the sheet metal is bent during deep drawing.<ref>Template:Cite book</ref>
A toothed belt-pulley design provides improved efficiency for mechanical power transmission using a tractrix catenary shape for its teeth.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> This shape minimizes the friction of the belt teeth engaging the pulley, because the moving teeth engage and disengage with minimal sliding contact. Original timing belt designs used simpler trapezoidal or circular tooth shapes, which cause significant sliding and friction.
Drawing machinesEdit
- In October–November 1692, Christiaan Huygens described three tractrix-drawing machines.<ref name="bos"/>
- In 1693 Gottfried Wilhelm Leibniz devised a "universal tractional machine" which, in theory, could integrate any first order differential equation.<ref>Template:Cite book</ref> The concept was an analog computing mechanism implementing the tractional principle. The device was impractical to build with the technology of Leibniz's time, and was never realized.
- In 1706 John Perks built a tractional machine in order to realise the hyperbolic quadrature.<ref>Template:Cite journal</ref>
- In 1729 Giovanni Poleni built a tractional device that enabled logarithmic functions to be drawn.<ref>Template:Cite book</ref>
A history of all these machines can be seen in an article by H. J. M. Bos.<ref name="bos">Template:Cite journal</ref>
See alsoEdit
- Dini's surface
- Hyperbolic functions for Template:Math, Template:Math, Template:Math, Template:Math
- Natural logarithm for Template:Math
- Sign function for Template:Math
- Trigonometric functions for Template:Math, Template:Math, Template:Math, Template:Math, Template:Math