GM High Feature engine
Template:Infobox automobile engine
The GM High Feature engine (also known as the HFV6, and including the 3600 LY7 and derivative LP1) is a family of modern DOHC V6 engines produced by General Motors. The series was introduced in 2004 with the Cadillac CTS and the Holden Commodore (VZ).
It is a 60° 24-valve design with aluminum block and heads and sequential multi-port fuel injection. Most versions feature continuously variable cam phasing on both intake and exhaust valves and electronic throttle control. Other features include piston oil-jet capability, forged and fillet rolled crankshaft, sinter forged connecting rods, a variable-length intake manifold, twin knock control sensors and coil-on-plug ignition. It was developed by the same international team responsible for the Ecotec, including the Opel engineers responsible for the 54° V6, with involvement with design and development engineering from Ricardo plc.Template:Cn
GM's Australian auto division Holden produced a HFV6 engine under the name "Alloytec."
HistoryEdit
The HFV6 was designed, tested, and produced in a joint program by Holden and Cadillac.Template:Cn A majority of designs into the new alloy construction, transmission pairing, and first use in production were all undertaken in Detroit (and manufactured in St. Catharines, Ontario). Holden was charged with developing smaller engines (Holden 3.2 LP1 and Saab 2.8 Turbo LP9) as well as their own Holden 3.6 and 3.0 HFV6 (called the Alloytec V6) for local models.
Cadillac and Holden both tested variations of these engines in the United States and Australia.
2.8Edit
LP1Edit
A Template:Convert LP1 variant was introduced in the 2005 Cadillac CTS. It was also used on the Chinese 2008 CTS. It has a Template:Convert bore and stroke, sequential multi-port fuel injection and a 10.0:1 compression ratio. The LP1 was built in St. Catharines, Ontario.
Applications:
| Year(s) | Model | Power | Torque |
|---|---|---|---|
| 2007–2009 | Buick Park Avenue (China) | Template:Convert @ 6500 rpm | Template:Convert @ 2600 rpm |
| 2005–2007 | Cadillac CTS | Template:Convert @ 6500 rpm | Template:Convert @ 3300 rpm |
| 2008-2010 | Cadillac CTS | Template:Convert @ 6800 rpm | Template:Convert @ 3600 rpm |
| 2007–2009 | Cadillac SLS (China) | Template:Convert @ 6500 rpm | Template:Convert @ 3300 rpm |
LP9 Template:AnchorEdit
This engine is also known as a A28NET, Z28NET, Z28NEL or B284.
The LP9 is a 2.8L turbocharged version used for the Saab 9-3, Saab 9-5, and other GM vehicles. It has the same bore and stroke as the naturally aspirated LP1, however the compression ratio is reduced to 9.5:1. The engine is manufactured at Holden's Fishermans Bend engine factory in Port Melbourne, Australia, while GM Powertrain Sweden (formerly Saab Automobile Powertrain) is responsible for turbocharging the engine. Global versions of this engine use the same horsepower rating for both metric and imperial markets – mechanical horsepower – while the Europe-only versions are rated in metric horsepower.
Applications:
| Year(s) | Model | Power | Torque |
|---|---|---|---|
| 2005–2008 | Opel/Vauxhall Vectra | Template:Convert @ 5500 rpm | Template:Convert @ 1900-4500 rpm |
| 2005–2008 | Opel/Vauxhall Signum | Template:Convert @ 5500 rpm | Template:Convert @ 1900-4500 rpm |
| 2006–2008 | Template:Convert @ 5500 rpm | Template:Convert @ 1900-4500 rpm | |
| 2005 | Opel/Vauxhall Vectra OPC/VXR | Template:Convert @ 5500 rpm | Template:Convert @ 1900-4500 rpm |
| 2006–2008 | Template:Convert @ 5500 rpm | Template:Convert @ 1900-4500 rpm | |
| 2006–2009 | Cadillac BLS | Template:Convert @ 5500 rpm | Template:Convert @ 1900-4500 rpm |
| 2006–2008 | Saab 9-3 Aero | Template:Convert @ 5500 rpm | Template:Convert @ 1900-4500 rpm |
| 2009 | Template:Convert @ 5500 rpm | Template:Convert @ 1900-4500 rpm | |
| 2008 | Saab 9-3 Turbo X | Template:Convert @ 5500 rpm | Template:Convert @ 1900-4500 rpm |
| 2008 | Saab 9-3 Aero Convertible | Template:Convert @ 5500 rpm | Template:Convert @ 1900-4500 rpm |
| 2009 | Template:Convert @ 5500 rpm | Template:Convert @ 1900-4500 rpm |
LAUEdit
The LAU is GM's new code for the LP9 Turbo engine, its usage starting with the 2010 Cadillac SRX.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> In 2011, production of the Cadillac SRX with the LAU engine ceased, but the engine remained in use in the Saab 9-4X until 2012, when production of that model came to an end.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref name="New Saab 9-4X: Powertrain">{{#invoke:citation/CS1|citation |CitationClass=web }}Template:Dead link</ref>
Applications:
| Year(s) | Model | Power | Torque |
|---|---|---|---|
| 2010–2011 | Cadillac SRX | Template:Convert at 5500 rpm | Template:Convert at 2000 rpm |
| 2011–2012 | Saab 9-4X | Template:Convert at 5500 rpm | Template:Convert at 2000 rpm |
| 2009–2013 | Opel/Vauxhall Insignia | Template:Convert @ 5500 rpm | Template:Convert @ 1900–4500 rpm |
| 2009–2013 | Opel/Vauxhall Insignia OPC/VXR | Template:Convert @ 5250 rpm | Template:Convert @ 1900–4500 rpm |
| 2010–2012 | Saab 9-5 Turbo6 XWD /Aero | Template:Convert @ 5500 rpm | Template:Convert @ 2000 rpm |
3.0Edit
LF1Edit
The LF1 is a Template:Convert version with a bore and stroke of Template:Convert produced between 2010 and 2014, equipped with spark ignition direct injection (SIDI) and a 11.7:1 compression ratio.
Applications:
| Year(s) | Model | Power | Torque | |
|---|---|---|---|---|
| 2010 | Buick LaCrosse | Template:Convert @ 6950 rpm | Template:Convert @ 5600 rpm | |
| 2010–2012 | Buick Park Avenue (China) | Template:Convert @ 6700 rpm | Template:Convert @ 2900 rpm | |
| 2010–2011 | Cadillac CTS | Template:Convert @ 7000 rpm | Template:Convert @ 5700 rpm | |
| 2011–2013 | Cadillac SLS (China) | Template:Convert @ 7000 rpm | Template:Convert @ 5600 rpm | |
| 2010–2011 | Cadillac SRX<ref name=SRXpress20090104>Template:Cite news</ref> | Template:Convert @ 6950 rpm | Template:Convert @ 5100 rpm | |
| 2010–2012 | Chevrolet Equinox | Template:Convert @ 6950 rpm | Template:Convert @ 5100 rpm | |
| 2010–2012 | GMC Terrain | Template:Convert @ 6950 rpm | Template:Convert @ 5100 rpm | |
| 2010 | Holden Commodore | Template:Convert @ 6700 rpm | Template:Convert @ 2900 rpm | |
| 2011 | Saab 9-4X<ref name="New Saab 9-4X: Powertrain"/> | Template:Convert @ 6950 rpm | Template:Convert @ 5100 rpm | |
| 2011 | Chevrolet Captiva | Template:Convert @ 6900 rpm | Template:Convert @ 5800 rpm | |
| 2012 | Chevrolet Malibu (Middle East)<ref>{{#invoke:citation/CS1|citation | CitationClass=web
}}</ref> |
Template:Convert @ 6900 rpm | Template:Convert @ 5600 rpm |
LFWEdit
The LFW is a flexible fuel version of the LF1, capable of running on E85, gasoline, or any mixture of the two. Output is identical to the LF1.
Applications:
| Year(s) | Model | Power | Torque |
|---|---|---|---|
| 2011-2017 | Buick GL8 (China only) | Template:Convert @ 6800 rpm | Template:Convert @ 5200 rpm |
| 2011–2012 | Chevrolet Equinox | Template:Convert @ 6950 rpm | Template:Convert @ 5100 rpm |
| 2011–2012 | GMC Terrain | Template:Convert @ 6950 rpm | Template:Convert @ 5100 rpm |
| 2012–2013 | Cadillac CTS | Template:Convert @ 7000 rpm | Template:Convert @ 5700 rpm |
| 2012–2013 | Chevrolet Captiva Sport | Template:Convert @ 6950 rpm | Template:Convert @ 5100 rpm |
| 2010–2017 | Holden Commodore (VE) and VF | Template:Convert @ 6800 rpm | Template:Convert @ 5200 rpm |
3.2 Template:AnchorEdit
Template:For Holden has built its own Template:Convert version of the High Feature engine in Australia produced between 2005 and 2010 with a bore and stroke of Template:Convert. Branded with the Alloytec name like the 3.6L version, this version produces Template:Convert at 6600 rpm and Template:Convert at 3200 rpm. It has a 10.3:1 compression ratio. Its fuel economy is Template:Convert in city, and Template:Convert on highway.Template:Citation needed. Holden also produced the 3.2L engines that were used by Alfa Romeo as the basis of its JTS V6 engine.
Applications:
- 2006-2010 Daewoo Winstorm / Chevrolet Captiva / Holden Captiva
- 2006-2010 Opel Antara / Daewoo Winstorm MaXX / Holden Captiva MaXX
- 2008-2012 Suzuki Grand Vitara
3.6Edit
Template:Infobox automobile engine
Template:Anchor LY7Edit
The Template:Convert LY7 engine was developed primarily by Holden and introduced in the 2004 Holden VZ Commodore and 2004 Cadillac CTS sedan. It has a 10.2:1 compression ratio, Sequential multi-port fuel injection, and a bore and stroke of Template:Convert. Lower-powered versions only have variable cam phasing on the inlet cam (LE0). Selected models also include variable exhaust. The engine weighs Template:Convert as installed.
This engine is produced in several locations: St. Catharines (Ontario), Flint Engine South (Michigan), Melbourne (Australia), Ramos Arizpe (Mexico), and Sagara (Japan) by Suzuki.
Suzuki's engine designation is N36A.
The dual-fuel Template:Convert LW2 version was able to run on petrol and autogas. The LW2 engine was based on the low-output LE0 V6. It featured a factory-fitted dual-fuel system developed by IMPCO, different valves, and hardened titanium valve seats. This motor was available exclusively in Holden vehicles from 2005–2012.
Applications:<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
LLTEdit
The Template:Convert LLT is a direct injected version based on the earlier LY7 engine. It was first unveiled in May 2006, and the DI version was claimed to have 15% greater power, 8% greater torque, and 3% better fuel economy than its port-injected counterpart. The LLT engine has a compression ratio of 11.3:1, and has been certified by the SAE to produce Template:Convert at 6300 rpm and Template:Convert of torque at 5200 rpm on regular unleaded (87 octane) gasoline. This engine debuted on the 2008 Cadillac STS and CTS.<ref name=NAIAS2008CTSEdmunds>Template:Cite news</ref><ref name=NEX2008CTS302>Template:Cite news</ref> GM used an LLT in all 2009–2017 Lambda-derived crossover SUVs to allow class-leading fuel economy in light of the new Corporate Average Fuel Economy (CAFE) standards. In these crossovers, the LLT engine produced up to Template:Convert and Template:Convert of torque.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
Applications:
LFXEdit
The LFX is an enhanced version of the LLT engine developed jointly by Holden and Cadillac. Introduced in the MY2012 Holden Commodore SV6 and the MY2012 Chevrolet Camaro LS/LT, it is Template:Convert lighter than the LLT, thanks to a redesigned cylinder head, integrated exhaust manifold, and composite intake manifold. Other components like the timing chains, fuel injectors, intake valves, and fuel pump have also been updated. They also updated the cam phasing and variable valve timing system compared to the LLT. Power and torque are up slightly from the LLT. The compression ratio is 11.5:1. The LFX also features E85 flex-fuel capability.
Applications:
_CHECol020915.jpg){kind=link}
_GMCCan_020915.jpg){kind=link}
LWREdit
The LWR is dedicated LPG 3.6-liter engine. Introduced in the MY2012 Holden Commodore, Based on the 3.6-litre LY7 engine, the LWR had a vapour injection system. The vapour injection system injected gas directly into the air intake runner, thereby preventing excess gas from circulating through the air intake system. Although liquid LPG injection generally produces more power, Holden justified vapour injection on the grounds of lower fuel consumption, lower Template:CO2 emissions, reduced pumping and parasitic losses, and start-up reliability in hot weather.
The dedicated LPG LWR engine produced peak power and torque of Template:Convert at 6000 rpm and Template:Convert at 2000 rpm. The LWR engine was mated to GM's six-speed 6L45 automatic transmission and, over the combined ADR 81/02 test cycle, the Commodore Omega achieved fuel consumption of Template:Convert – an improvement of 1.6 L/100 km compared to its dual-fuel LW2 predecessor. Furthermore, the LWR engine exceeded Euro 6 emissions standards.
- Specially hardened valves and valve seats.
- A redesigned cylinder head and manifold for improved air flow.
- Variable exhaust valve timing (the LW2 engine only had variable intake valve timing)
- Specially-developed fuel injectors.
- New pistons with pentroof-style centre-domes and valve eyelets for a higher compression ratio of 12.2:1 (compared to 10.2:1 for the dual fuel engine).
- A new fuel rail and a new LPG fuel filter.
Applications:
| Year(s) | Model | Power | Torque |
|---|---|---|---|
| 2012–2013 | Holden Commodore VE II (MY 2012) | Template:Convert @ 6000 rpm | Template:Convert @ 2000 rpm |
| 2013–2015 | Holden Commodore VF | Template:Convert @ 6000 rpm | Template:Convert @ 2000 rpm |
| 2012–2015 | Holden Caprice | Template:Convert @ 6000 rpm | Template:Convert @ 2000 rpm |
LCSEdit
The Template:Convert LCS was derived from the direct-injected LLT for use in hybrids, using the two-mode system.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Differences from the LLT included a slightly lower compression ratio, 11.3:1, and lower power and torque peaks. It was to debut in the 2009 Saturn Vue Hybrid, where it would have made Template:Convert at 6100 rpm and Template:Convert of torque at 4800 rpm.<ref>http://media.gm.com/us/powertrain/en/product_services/2009a/HPT%20Library/HFV6/2009%2036L%20Hybrid_SAE.pdf Template:Dead link</ref> Fuel economy ratings would have been Template:Convert in city, and Template:Convert on highway. However, GM cancelled its plans for the Saturn Vue Hybrid.
LF3Edit
The 3.6L twin-turbocharged version for the 2014 Cadillac CTS and XTS was announced at the 2013 NYAS.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
The engine is rated at Template:Convert of power at 5750 rpm and Template:Convert of torque at 3500–4500 rpm (with 90% of torque being available at 2500–5500 rpm) and helps the CTS achieve [[0 to 60 mph|Template:Convert]] time of 4.6 seconds with an 8-speed automatic transmission.
In essence, the twin-turbo 3.6L V6 is the forced-induction variant of the popular LFX V6 found in the Cadillac ATS, XTS, and SRX, among many other GM models, with several important upgrades, including:
- All-new cylinder block casting
- All-new cylinder head castings
- Strengthened connecting rods
- Forged steel crankshaft
- Continuously variable valve timing
- Large Template:Convert intake valves and Template:Convert sodium-filled exhaust valves
- Machined, domed aluminum pistons with top steel ring carrier for greater strength
- 10.2:1 compression ratio
- Patented, integrated charge air cooler system with low-volume air ducts
- Twin turbochargers produce more than Template:Convert
- Vacuum-actuated wastegates with electronic control valves
- All-new direct injection fuel system
- Tuned air inlet and outlet resonators, aluminum cam covers, and other features that contribute to exceptional quietness and smoothness
Applications:
| Year(s) | Model | Power | Torque | Dyno chart |
|---|---|---|---|---|
| 2014–2019 | Cadillac XTS | Template:Convert @ 6000 rpm | Template:Convert @ 1900–5600 rpm | link |
| 2014–2019 | Cadillac CTS | Template:Convert @ 5750 rpm | Template:Convert @ 3500–4500 rpm | link |
LF4Edit
The LF4 is a higher-performance variant of the LF3 for use in the Cadillac ATS-V and Cadillac CT4-V Blackwing. Changes to the LF3 include:
- Turbochargers with low-inertia titanium-aluminide turbines and vacuum-actuated wastegates for more responsive torque production
- Compressors matched for peak efficiency at peak power levels, for optimal track performance
- Patent-pending low-volume charge-cooling system that optimizes packaging efficiency and maximizes boost pressure
- To compliment the quick spooling turbochargers, lightweight titanium connecting rods that reduce inertia of the rotating assembly were used on all ATS-V models, while only manual transmission CT4-V Blackwing models featured titanium connecting rods. 10-speed automatic CT4-V Blackwing models featured steel connecting rods.<ref name="TitaniumRods">{{#invoke:citation/CS1|citation
|CitationClass=web }}</ref>
- Peak boost increased to Template:Convert, from Template:Convert
- Higher-flow fuel injectors
- Oil pan baffling for better oil flow at high cornering speeds<ref name="2016 Cadillac ATS-V Coupe and Sedan: 455 M3-Baiting Horsepower!">{{#invoke:citation/CS1|citation
|CitationClass=web }}</ref>
Applications:
| Year(s) | Model | Power | Torque | Dyno chart |
|---|---|---|---|---|
| 2016–2019 | Cadillac ATS-V, Cadillac ATS-V Coupe | Template:Convert @ 5850 RPM | Template:Convert @ 3500 RPM | 2016 link |
| 2022–present | Cadillac CT4-V Blackwing | Template:Convert | Template:Convert |
_ATSV_052015.jpg){kind=link}
LFREdit
The LFR is a bi-fuel variant of the LFX, although multi-point fuel injection is used for both the gasoline and CNG instead of direct-injection.
Applications:
| Year(s) | Model | Power | Torque | Dyno chart |
|---|---|---|---|---|
| 2015–2017 | Chevrolet Impala Bi-Fuel | CNG Template:Convert @ 6000 RPM | CNG Template:Convert @ 5200 RPM | 2016 CNG link |
| Gasoline Template:Convert @ 5900 RPM | Gasoline Template:Convert @ 4800 RPM | 2016 Gas link |
LFYEdit
The LFY is similar to the LFX, but adds stop-start technology and has improved airflow.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
Applications:
| Year(s) | Model | Power | Torque |
|---|---|---|---|
| 2018–2024 | Buick Enclave | Template:Convert @ 6800 rpm | Template:Convert @ 2800 rpm |
| 2018–2023 | Chevrolet Traverse | Template:Convert @ 6800 rpm | Template:Convert @ 2800 rpm |
Fourth generationEdit
Starting with the 2016 Cadillac models, a new generation of High Feature V6s were developed.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> These new engines have redesigned block architectures with bore centers increased from Template:Convert on prior HFV6 engines to Template:Convert and a redesigned cooling system to target the hottest areas while also facilitating faster warm-up. They also incorporate engine start-stop technology, cylinder-deactivation, 2-stage oil pumps, and updated variable valve timing featuring intermediate park technology for late-intake valve closure. Both engines debuted in the 2016 Cadillac CT6.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
3.0 LEdit
LGWEdit
Bore and stroke of Template:Convert are used, along with a 9.8:1 compression ratio and twin turbos with titanium-aluminide turbine wheels. Maximum engine speed is 6500 RPM. Premium unleaded fuel is required.
Applications:
| Year(s) | Model | Power | Torque | Dyno chart |
|---|---|---|---|---|
| 2016–2019 | Cadillac CT6 | Template:Convert @ 5700 RPM | Template:Convert @ 2500-5100 RPM | dyno chart |
LGYEdit
Bore and stroke of Template:Convert are used, along with a 9.8:1 compression ratio and twin turbos with titanium-aluminide turbine wheels. Maximum engine speed is 6500 RPM. Premium unleaded fuel is required.
Applications:
| Year(s) | Model | Power | Torque | Dyno chart |
|---|---|---|---|---|
| 2020–present | Cadillac CT5 | Template:Convert @ 5600 RPM | Template:Convert @ 2400-4400 RPM | |
| V: Template:Convert @ 5600 RPM | V: Template:Convert @ 2400-4400 RPM |
3.6 LEdit
LGXEdit
Along with the increased bore spacing, the new 3.6 L DI V6 has larger bores than before, growing from Template:Convert to Template:Convert with the same Template:Convert stroke as the 3.0L LGW, for a displacement of Template:Convert. Intake and exhaust valves are also increased in size along with other changes to the cylinder head.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> The only part shared with the prior generation is the hydraulic lash adjusters in the valvetrain.<ref name="eward">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> The LGX was benchmarked against the 3.7L VQ37VHR of the 2015 Infiniti Q40.<ref name="eward"/> Compression ratio is 11.5:1 and maximum engine speed is 7200 RPM.
Compared to GM's LFX/LFY 3.6 L engine, the LGX features active fuel management, NVH enhancements and slightly more torque.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
The LGX was on Ward's 10 Best Engines for 2016.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
Applications:
| Year(s) | Model | Power | Torque | Dyno chart |
|---|---|---|---|---|
| 2016–2019 | Cadillac ATS | Template:Convert @ 6800 RPM | Template:Convert @ 5300 RPM | 2016 link |
| 2016–2019 | Cadillac CT6 | Template:Convert @ 6800 RPM | Template:Convert @ 5300 RPM | 2016 link |
| 2016–2019 | Cadillac CTS | Template:Convert @ 6800 RPM | Template:Convert @ 5300 RPM | 2016 link |
| 2016–2024 | Chevrolet Camaro | Template:Convert @ 6800 RPM | Template:Convert @ 5300 RPM | 2016 link |
| 2017–2019 | Buick LaCrosse | Template:Convert @ 6800 RPM | Template:Convert @ 5200 RPM | |
| 2018–2020 | Buick Regal GS | Template:Convert @ 6800 RPM | Template:Convert @ 5200 RPM | |
| 2018–2020 | Holden Commodore | Template:Convert @ 6800 RPM | Template:Convert @ 5200 RPM | |
| 2017–2025 | Cadillac XT5 | Template:Convert @ 6600 RPM | Template:Convert @ 5000 RPM | |
| 2017–2023 | GMC Acadia | Template:Convert @ 6600 RPM | Template:Convert @ 5000 RPM | |
| 2019–present | Chevrolet Blazer | Template:Convert @ 6600 RPM | Template:Convert @ 5000 RPM | |
| 2020–present | Cadillac XT6 | Template:Convert @ 6600 RPM | Template:Convert @ 5000 RPM |
LGZEdit
The LGZ is a variant of the LGX designed for use in the Chevrolet Colorado and GMC Canyon.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}Template:Dead link</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
Applications:
| Year(s) | Model | Power | Torque |
|---|---|---|---|
| 2017–2022 | GMC Canyon | Template:Convert @ 6800 RPM | Template:Convert @ 4000 RPM |
| Chevrolet Colorado |
7.2L V12Edit
On March 21, 2007, AutoWeek reported that GM was planning to develop a 60-degree V12 based on this engine family to power the top version of Cadillac's upcoming flagship sedan. This Cadillac would essentially have had two 3.6L High Feature V6s attached crankshaft-to-crankshaft and would have featured high-end technologies including direct injection and cylinder deactivation. If this engine were developed, it would have displaced 7.2 liters, and produced approximately Template:Convert and Template:Convert of torque. Development of the engine was reportedly being conducted in Australia by Holden, with a potential HSV or Statesman application.<ref name=AutoweekPR20070321>Template:Cite press release</ref>
In August 2008, GM announced that development of the V12 had been cancelled.<ref name=autospies20080821>Template:Cite news</ref>
Timing chain issuesEdit
Earlier production 2.8L, 3.0L, 3.2L, and 3.6L engines with the three chain design suffered from premature timing chain failures because of a faulty PCV system and extended oil change intervals. Most of the problems occurred on pre-LFX engines.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
Holden High Feature engineEdit
{{ safesubst:#invoke:Unsubst||date=__DATE__ |$B= {{ safesubst:#invoke:Unsubst||date=__DATE__ |$B= Template:Ambox }} }} Holden sold a HFV6 engine under the name Alloytec. The High Feature moniker on the Holden produced engine is reserved for the twin cam phasing high output version. The block was designed to be expandable from 2.8 L to 4.0 L. High Feature V6 engines were previously produced in Fishermans Bend, Port Melbourne, Australia, and remain in production at the following four manufacturing locations: St. Catharines Engine Plant, St. Catharines, Canada; Flint Engine South in Flint, Michigan, United States; Romulus Engine Plant in Romulus, Michigan; and Ramos Arizpe, Coahuila, Mexico. The assembly lines for the St. Catharines and Flint facilities were manufactured by Hirata Corporation at its powertrain facility in Kumamoto, Japan. Most of the designs of this motor happened in Flint. They were first produced for the Cadillac range.Template:Cn The engine block and cylinder heads are cast at Defiance Foundry in Defiance, Ohio.
ReferencesEdit
External linksEdit
- Technical article from AutoSpeed
- GM Unveils New Direct Injection V-6 - Ward's Auto World
- WebWombat article
- http://www.gminsidenews.com/index.php?page=Engine_Guide
- http://www.chevrolet.com/impala-4-door-sedan.html
- https://web.archive.org/web/20140109174626/http://www.chevrolet.com/2013-traverse-crossover-suv.html