SBB RABDe 500

Template:Use dmy dates Template:Short description Template:Infobox train

ICN Double Set (Robert Walser facing buffers) stationed at Template:Rws Platform 10

The SBB RABDe 500, also known as the ICN,Template:Efn is a Swiss high speed passenger EMU, which was introduced in 2000, in time for Expo.02 held in western Switzerland in 2002. Its maximum speed is Template:Convert, and it employs tilting technology, which allows it to travel through curvy routes faster than non-tilting trains. The train sets were a joint development by Bombardier, Swiss Federal Railways and Alstom, with an aerodynamic body designed by Pininfarina, bogies and tilting mechanism designed by the then SIG, Schweizerische Industrie Gesellschaft.

Forty-four RABDe 500 trains with a total of 308 coaches were delivered to SBB-CFF-FFS between 1999 and 2005. The RABDe 500 often run with two complete compositions, each with seven carriages and a seating capacity of 480,<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> both including a dining car. The outer four of the seven carriages are second class.

HistoryEdit

Swiss Federal Railways ordered an initial 24 7-car trainsets in 1996 at a cost of Template:CHF. The contract went to a consortium including Adtranz, Template:Ill, and Fiat-SIG.<ref>Template:Cite news</ref> Pininfarina designed the vehicle body.<ref name="railway-technology">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> The trains were intended for use on the Jura Foot Line; adopting tilting technology allowed SBB to defer track upgrades over the route.<ref name="janes">Template:Cite book</ref>

The first trainsets entered service on the 28 May 2000 timetable change, running from St. Gallen via Winterthur, Zürich and Biel/Bienne to Lausanne.<ref name="nzz">Template:Cite news</ref> All 24 trainsets were in service by the opening of the Expo.02 national exposition in May 2002. The trains all carried the slogan "enable the future" (Template:Langx).<ref>Template:Cite news</ref>

SBB ordered another 10 trainsets, with an option for 10 more, in June 2001. SBB exercised the option that December, for a total of 20 additional transets at Template:CHF.<ref>Template:Cite news</ref><ref name="news.ch">Template:Cite news</ref> Delivery was complete by 2005.<ref name="platform5" />

Formerly, SBB designated intercity services operated by the SBB RABDe 500 as "ICN", differentiating them from other InterCity (IC) and InterRegio (IR) services. This practice ceased with the December 2017 timetable changes, in which all IC and IR services gained numbers and the ICN category was eliminated.<ref>Template:Cite news</ref> RABDe 500-operated services are indicated on timetables and mobile applications by the "Template:Abbr" label.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

All 44 trainsets were refurbished between 2012 and 2019, an overhaul taking 25 days per train.<ref name="ICNoverhaul">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Another overhaul, taking place between 2021 and 2029, will replace the interiors and improve mobile phone reception.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

Template:As of the RABDe 500 is primarily used on two InterCity routes and one InterRegio route: the IC 5, running from Template:Rws to Template:Rws or Zürich HB; the IC 51, running from Template:Rws to Template:Rws; and the IR 57 running from Template:Rws to Template:Rws.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

DesignEdit

Each formation is composed of seven cars. The first two and last two cars in the trainset are the second class cars, and have the traction motors and powered axles. The three middle cars carry first class seating; the third car is split between first class and the restaurant car.<ref name="platform5" /> The formation is Template:Convert long and weighs Template:Convert. The car body is a monocoque design built out of aluminium.<ref name="railway-technology" />

The RABDe 500 can tilt at a maximum of 8 degrees.<ref name="nzz" /> Eight Template:Convert traction motors produce Template:Convert; the train can travel at a maximum speed of Template:Convert.<ref name="platform5 " /> On routes with a significant number of curves, the tilting technology could reduce travel times by 10–20%.<ref name="gbt" /> For example, on the Template:Rws–Template:Rws route, the introduction of the trains shortened travel times by 15 minutes.<ref name="nzz" />

In 2015–2016, eighteen trainsets were adapted for operation in the Gotthard Base Tunnel. Changes included improved fire detection equipment, cab signaling upgrades, and improvements to heating and cooling.<ref name="gbt">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> This was a temporary measure until newer non-tilting trains SBB RABe 501 (Giruno) trains became available.<ref name="SBB use of Giruno">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

NamingEdit

All forty-four RABDe 500 trains are named, mostly after famous Swiss scholars, artists, writers, politicians, engineers, and architects. Each train bears the portrait of its namesake, painted by Bernese painter Martin Fivian, in the third car (first class and restaurant).<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

List of names:<ref name="platform5" />

Template:Div col