Sulfur trioxide
Template:DistinguishTemplate:Chembox Sulfur trioxide (alternative spelling sulphur trioxide) is the chemical compound with the formula SO3. It has been described as "unquestionably the most [economically] important sulfur oxide".<ref name="G&E" /> It is prepared on an industrial scale as a precursor to sulfuric acid.
Sulfur trioxide exists in several forms: gaseous monomer, crystalline trimer, and solid polymer. Sulfur trioxide is a solid at just below room temperature with a relatively narrow liquid range. Gaseous SO3 is the primary precursor to acid rain.<ref>Template:Cite journal</ref>
Molecular structure and bondingEdit
MonomerEdit
The molecule SO3 is trigonal planar. As predicted by VSEPR theory, its structure belongs to the D3h point group. The sulfur atom has an oxidation state of +6 and may be assigned a formal charge value as low as 0 (if all three sulfur-oxygen bonds are assumed to be double bonds) or as high as +2 (if the Octet Rule is assumed).<ref>Template:Cite book</ref> When the formal charge is non-zero, the S-O bonding is assumed to be delocalized. In any case the three S-O bond lengths are equal to one another, at 1.42 Å.<ref name="G&E" /> The electrical dipole moment of gaseous sulfur trioxide is zero.
TrimerEdit
Both liquid and gaseous<ref>Template:Cite journal</ref> SO3 exists in an equilibrium between the monomer and the cyclic trimer. The nature of solid SO3 is complex and at least 3 polymorphs are known, with conversion between them being dependent on traces of water.<ref>Template:Holleman&Wiberg</ref>
Absolutely pure SO3 freezes at 16.8 °C to give the γ-SO3 form, which adopts the cyclic trimer configuration [S(=O)2(μ-O)]3.<ref>Template:Cite journal</ref><ref name="G&E" />
PolymerEdit
If SO3 is condensed above 27 °C, then α-SO3 forms, which has a melting point of 62.3 °C. α-SO3 is fibrous in appearance. Structurally, it is the polymer [S(=O)2(μ-O)]n. Each end of the polymer is terminated with OH groups.<ref name="G&E" /> β-SO3, like the alpha form, is fibrous but of different molecular weight, consisting of an hydroxyl-capped polymer, but melts at 32.5 °C. Both the gamma and the beta forms are metastable, eventually converting to the stable alpha form if left standing for sufficient time. This conversion is caused by traces of water.<ref name="Merck">Merck Index of Chemicals and Drugs, 9th ed. monograph 8775</ref>
Relative vapor pressures of solid SO3 are alpha < beta < gamma at identical temperatures, indicative of their relative molecular weights. Liquid sulfur trioxide has a vapor pressure consistent with the gamma form. Thus heating a crystal of α-SO3 to its melting point results in a sudden increase in vapor pressure, which can be forceful enough to shatter a glass vessel in which it is heated. This effect is known as the "alpha explosion".<ref name="Merck"/>
Chemical reactionsEdit
Sulfur trioxide undergoes many reactions.<ref name=G&E/>
Hydration and hydrofluorinationEdit
SO3 is the anhydride of H2SO4. Thus, it is susceptible to hydration:
- SO3 + H2O → H2SO4Template:Pad(ΔfH = −200 kJ/mol)<ref>{{#invoke:citation/CS1|citation
|CitationClass=web }}</ref>
Gaseous sulfur trioxide fumes profusely even in a relatively dry atmosphere owing to formation of a sulfuric acid mist. SO3 is aggressively hygroscopic. The heat of hydration is sufficient that mixtures of SO3 and wood or cotton can ignite. In such cases, SO3 dehydrates these carbohydrates.<ref name="Merck"/>
Akin to the behavior of H2O, hydrogen fluoride adds to give fluorosulfuric acid:
- SO3 + HF → FSO3H
DeoxygenationEdit
SO3 reacts with dinitrogen pentoxide to give the nitronium salt of pyrosulfate:
- 2 SO3 + N2O5 → [NO2]2S2O7
OxidantEdit
Sulfur trioxide is an oxidant. It oxidizes sulfur dichloride to thionyl chloride.
- SO3 + SCl2 → SOCl2 + SO2
Lewis acidEdit
SO3 is a strong Lewis acid readily forming adducts with Lewis bases.<ref>Template:Cotton&Wilkinson6th</ref> With pyridine, it gives the sulfur trioxide pyridine complex. Related adducts form from dioxane and trimethylamine.
Sulfonating agentEdit
Sulfur trioxide is a potent sulfonating agent, i.e. it adds SO3 groups to substrates. Often the substrates are organic, as in aromatic sulfonation.<ref>Template:Cite journal</ref> For activated substrates, Lewis base adducts of sulfur trioxide are effective sulfonating agents.<ref>Template:Cite journal</ref>
PreparationEdit
The direct oxidation of sulfur dioxide to sulfur trioxide in air proceeds very slowly:
- 2 SO2 + O2 → 2 SO3Template:Pad(ΔH = −198.4 kJ/mol)
IndustrialEdit
Industrially SO3 is made by the contact process. Sulfur dioxide is produced by the burning of sulfur or iron pyrite (a sulfide ore of iron). After being purified by electrostatic precipitation, the SO2 is then oxidised by atmospheric oxygen at between 400 and 600 °C over a catalyst. A typical catalyst consists of vanadium pentoxide (V2O5) activated with potassium oxide K2O on kieselguhr or silica support. Platinum also works very well but is too expensive and is poisoned (rendered ineffective) much more easily by impurities.<ref>Hermann Müller "Sulfuric Acid and Sulfur Trioxide" in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim. 2000 {{#invoke:doi|main}}</ref> The majority of sulfur trioxide made in this way is converted into sulfuric acid.
LaboratoryEdit
Sulfur trioxide can be prepared in the laboratory by the two-stage pyrolysis of sodium bisulfate. Sodium pyrosulfate is an intermediate product:<ref name="vries">Template:Cite journal</ref>
- Dehydration at 315 °C:
- 2 NaHSO4 → Na2S2O7 + H2O
- Cracking at 460 °C:
- Na2S2O7 → Na2SO4 + SO3
The latter occurs at much lower temperatures (45–60 °C) in the presence of catalytic H2SO4.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> In contrast, KHSO4 undergoes the same reactions at a higher temperature.<ref name="vries"/>
Another two step method involving a salt pyrolysis starts with concentrated sulfuric acid and anhydrous tin tetrachloride:
- Reaction between tin tetrachloride and sulfuric acid in a 1:2 molar mixture at near reflux (114 °C):
- SnCl4 + 2 H2SO4 → Sn(SO4)2 + 4 HCl
- Pyrolysis of anhydrous tin(IV) sulfate at 150 °C - 200 °C:
- Sn(SO4)2 → SnO2 + 2 SO3
To further reduce water contamination, Oleum and a slight excess of Tin(IV) Chloride should be used. The slight excess of SnCl4 can then be separated by carefully heating the solid Tin(IV) Sulfate under a vacuum to no more than 120 °C. The excess SO3 from the Oleum and the remaining SnCl4 will react during HCl formation and form Tin(IV) Oxide and Sulfuryl Chloride. If an excess of SO3 in the Oleum is present relative to SnCl4 , the Tin(IV) Oxide will absorb it and form more Tin(IV) Sulfate.
The advantage of this method over the sodium bisulfate one is that it can produce the pure trimer of SO3 (since no water is present) while still using safe temperatures for normal borosilicate laboratory glassware. Other dry sulfate salt pyrolysis reactions require higher temperatures which increases the risk of shattering. A disadvantage is that it generates significant quantities of hydrogen chloride gas which needs to be captured as well.
SO3 may also be prepared by dehydrating sulfuric acid with phosphorus pentoxide.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
ApplicationsEdit
Sulfur trioxide is a reagent in sulfonation reactions. Dimethyl sulfate is produced commercially by the reaction of dimethyl ether with sulfur trioxide:<ref name=Ullmann>Template:Cite book</ref>
Sulfate esters are used as detergents, dyes, and pharmaceuticals. Sulfur trioxide is generated in situ from sulfuric acid or is used as a solution in the acid.
Template:AnchorB2O3 stabilized sulfur trioxide was traded by Baker & Adamson under the tradename "Sulfan" in the 20th century.<ref name="Habashi-Dugdale_1973"/>
SafetyEdit
Along with being an oxidizing agent, sulfur trioxide is highly corrosive. It reacts violently with water to produce highly corrosive sulfuric acid.
See alsoEdit
ReferencesEdit
SourcesEdit
Template:Oxides Template:Sulfur compounds Template:Authority control