Template:Short description Template:Infobox rail line

The Yamanote Line (Template:Langx) is a railway loop service in Tokyo, Japan, operated by the East Japan Railway Company (JR East). It is one of Tokyo's busiest and most important lines, connecting most of Tokyo's major stations and urban centres, including Marunouchi, the Yūrakuchō/Ginza area, Shinagawa, Shibuya, Shinjuku, Ikebukuro, and Ueno, with all but two of its 30 stations connecting to other railway or underground (subway) lines.

Internally JR East refers to the "Yamanote Line" as the quadruple-track Template:Cvt corridor between Shinagawa and Tabata via Shinjuku.<ref name=":0">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref name=":1">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>Template:Cite news</ref> The corridor consists of a pair of tracks used by Yamanote local trains and another parallel pair of tracks called "the Yamanote Freight Line" used by the Saikyō and Shōnan-Shinjuku line trains, some limited express services, and freight trains.<ref>Template:Cite book</ref> In everyday usage, branding on maps and station signage, the "Yamanote Line" refers to the local service (also called "system") running the entire Template:Convert line looping between the Yamanote corridor via Shinjuku Station and the central portions of the Tōhoku and Tōkaidō Main Lines Via Tokyo Station.<ref>Template:Cite book</ref> (This article uses the same definition unless noted otherwise.)

Service outlineEdit

Trains run from 04:26 to 01:04 the next day at intervals as short as 2 minutes during peak periods and four minutes at other times. A complete loop takes 59 to 65 minutes. All trains stop at each station. Trains are put into and taken out of service at Template:STN (which for timetabling purposes is the line's start and terminus) and sometimes Template:STN. Certain trains also start from Tamachi in the mornings and end at Template:STN in the evenings. Trains which run clockwise are known as Template:Nihongo and those counter-clockwise as Template:Nihongo. (Trains travel on the left in Japan, as with road traffic.)

The line also acts as a fare zone destination for JR tickets from locations outside Tokyo, permitting travel to any JR station on or within the loop. This refers to stations on the Yamanote Line as well as the Chūō-Sōbu and Chūō Rapid Lines and between Template:STN and Template:STN.

The Yamanote Line colour used on all rolling stock, station signs and diagrams is JNR Yellow Green No.6 <ref>Template:Cite book</ref>(, Munsell code 7.5GY 6.5/7.8), known in Japanese as Template:Nihongo.

Ridership and overcrowdingEdit

Due to the Yamanote Line's central location connecting most of Tokyo's major commuter hubs and commercial areas, the line is very heavily used. Sections of the line were running over 250%Template:Ref label capacity in the 1990s, and remained above 200%Template:Ref label for most of the 2000s<ref>Template:Cite news</ref> with most sections dropping below 150%Template:Ref label in 2018.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> This is due to larger and more frequent trains being introduced to the Yamanote Line and the opening of parallel relief lines such as the Tokyo Metro Template:Lnl and Ueno–Tokyo Line. The maximum overcrowding during rush hour is about 158%.

The ridership intensity of the Yamanote Line in 2018 was 1,134,963 passengers - km / km of route.<ref name=":0" />Template:Ref labelTemplate:Ref label The daily ridership of the Yamanote Line estimated in a 2015 MLIT National Transit census was about 4 million people per day.<ref name="ridership2">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>Template:Ref label However, in both cases "Yamanote Line" refers to JR East's internal definition of the entire rail corridor between Shinagawa and Tabata stations via Shinjuku which includes the ridership of the Saikyō and Shōnan–Shinjuku Lines on the parallel Yamanote freight line. Meanwhile, the ridership of the Yamanote Line services between Tabata and Shinagawa Station via Tokyo are excluded and counted as part of the Tōhoku and Tōkaidō Main Lines.

NameEdit

"Yamanote" literally refers to inland, hillier districts or foothills (as distinct from areas close to the sea). In Tokyo, "Yamanote" lies along the western side of the Yamanote Line loop. The word consists of the Japanese morphemes yama, meaning 'mountain', the genitive suffix no, and te, meaning 'hand', thus literally translating as "mountain's hand", analogous to the English term "foothills". Yamanote-sen is officially written in Japanese without the kana Template:Nihongo, which makes its pronunciation ambiguous in print. The characters Template:Nihongo2 may also be pronounced yamate, as in Yamate-dōri (Yamate Street), which runs parallel to the west side of the Yamanote Line. The Seishin-Yamate Line in Kobe and the Yamate area of Yokohama also use this pronunciation. After World War II, SCAP ordered all train placards to be romanized, and the Yamanote Line was romanized as "Yamate Line" due to a mistake made by one of the workers at JNR. It was thus alternatively known as "Yamanote" and "Yamate" until 1971, when the Japanese National Railways changed the pronunciation back to "Yamanote", as people started riding trains heading for Yamate thinking it goes to the Yamate Station located in Yokohama. Some older people still refer to the line as the "Yamate Line".<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

Station listEdit

  • Stations are listed in clockwise order from Shinagawa to Tabata, but for operational purposes trains officially start and terminate at Ōsaki.
    • Template:Nihongo: Shinagawa → Shibuya → Shinjuku → Ikebukuro → Tabata → Ueno → Tokyo → Shinagawa
    • Template:Nihongo: Shinagawa → Tokyo → Ueno → Tabata → Ikebukuro → Shinjuku → Shibuya → Shinagawa
  • All stations are located in the special wards of Tokyo.
  • All trains on the Yamanote Line are local trains that stop at all stations.

Legend

Line name No. Station Japanese Distance (km) Keihin–Tōhoku

Line Rapid

Yamanote Freight Line

Shōnan–Shinjuku and Saikyo Services

Transfers Location
Between
stations
Total
— ↑ Loop line towards Template:STN (Inner Circle) ↑ —
Yamanote
Line
Template:JRSN Template:STN lang}} from
Template:STN

0.9
0.0 Template:Plainlist Minato
Template:JRSN Template:STN lang}} 2.0 2.0 Template:Plainlist Shinagawa
Template:JRSN Template:STN lang}} 0.9 2.9 Template:Plainlist
Template:JRSN Template:STN lang}} 1.2 4.1 Template:Plainlist
Template:JRSN Template:STN lang}} 1.5 5.6 Template:Plainlist Shibuya
Template:JRSN Template:STN lang}} 1.6 7.2 Template:Plainlist
Template:JRSN Template:STN lang}} 1.2 8.4 Template:Plainlist
Template:JRSN Template:STN lang}} 1.5 9.9 Template:Plainlist
Template:JRSN Template:STN<ref group="Note">The southern half of Shinjuku Station is in Shibuya ward, so technically the Yamanote Line has 4.5 stations in Shibuya ward and 2.5 stations in Shinjuku ward.</ref> lang}} 0.7 10.6 Template:Plainlist Shinjuku
Template:JRSN Template:STN lang}} 1.3 11.9  
Template:JRSN Template:STN lang}} 1.4 13.3 Template:Plainlist
Template:JRSN Template:STN lang}} 0.9 14.2   Toshima
Template:JRSN Template:STN lang}} 1.2 15.4 Template:Plainlist
Template:JRSN Template:STN lang}} 1.8 17.2 Template:Ric (Otsuka-ekimae)
Template:JRSN Template:STN lang}} 1.1 18.3 Template:TSLS Template:Lnl (I-15)
Template:JRSN Template:STN lang}} 0.7 19.0 Template:TSLS Template:Lnl (N-14)
Template:JRSN Template:STN {{#invoke:Lang|lang}} 1.6 20.6 Template:JRLS Keihin–Tōhoku Line Kita
Tohoku
Main
Line
Template:JRSN Template:STN lang}} 0.8 21.4 Template:Plainlist Arakawa
Template:JRSN Template:STN lang}} 0.5 21.9 Template:Plainlist
Template:JRSN Template:STN lang}} 1.1 23.0 Template:JRLS Keihin–Tōhoku Line Taitō
Template:JRSN Template:STN lang}} 1.1 24.1 Template:Plainlist
Template:JRSN Template:STN lang}} 0.6 24.7 Template:Plainlist
Template:JRSN Template:STN lang}} 1.0 25.7 Template:Plainlist Chiyoda
Template:JRSN Template:STN lang}} 0.7 26.4 Template:Plainlist
Template:JRSN Template:STN {{#invoke:Lang|lang}} 1.3 27.7 Template:Plainlist
Tokaido
Main
Line
Template:JRSN Template:STN lang}} 0.8 28.5 Template:Plainlist
Template:JRSN Template:STN lang}} 1.1 29.6 Template:Plainlist Minato
Template:JRSN Template:STN lang}} 1.2 30.8 Template:Plainlist
Template:JRSN Template:STN lang}} 1.5 32.3 Template:Plainlist
Template:JRSN Template:STN lang}} 1.3 33.6 Template:Plainlist
— ↓ Loop line towards Template:STN (Outer Circle) ↓ —

Template:Reflist

Rolling stockEdit

Template:As of, the line's services are operated exclusively by a fleet of 50 11-car E235 series EMUs, the first of which was introduced on the line on 30 November 2015. However, a number of technical faults, including problems with door close indicators, resulted in the train being taken out of service the same day.<ref name="chunichi20151130">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> The E235 series returned to service on the Yamanote Line on 7 March 2016.<ref name="nhk20160307">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> All Yamanote Line rolling stock are stored and maintained at Template:Ill near Ōsaki Station.<ref name="jrr2015_winter"/>

Former rolling stockEdit

File:JReast SahaE230-500.jpg
Former E231-500 series 6-door car with the seats folded up, January 2010

Prior to the E235 series, the line's services were operated by E231-500 series EMUs, which were in use from April 21, 2002<ref name="jrr2015_winter">Template:Cite book</ref> to January 20, 2020. These trains originally each included two "six-door cars" with six pairs of doors per side and bench seats that were folded up to provide standing room only during the morning peak until 10 a.m. From February 22, 2010, the seats were no longer folded up during the morning peak,<ref name="hobidas20100217">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> and all trains were standardized with newly built four-door cars by 31 August 2011.<ref name="railfan20110906">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> This was due to reduced congestion on the line as well as preparation for the installation of platform doors on all stations by 2017.<ref>Template:Cite news</ref>

The E231 series supported a new type of traffic control system, called digital Automatic Train Control (D-ATC). The series also had a more modern design and has two 15-inch LCD monitors above each door, one of which is used for displaying silent commercials, news and weather; and another which is used for displaying information on the next stop (in Japanese, English, Korean and more) along with notification of delays on Shinkansen and other railway lines in the greater Tokyo area.

File:Yamanote Line - in out harajuku station - on tracks near ebisu - 2023 July 30.webm
A train on the Yamanote Line arriving and departing Harajuku Station and on the tracks near Ebisu Station, 2023

TimelineEdit

Template:Simple Horizontal timeline

HistoryEdit

File:Construction of the Yamanote Line en.svg
The construction of the Yamanote Line and current JR lines
File:Yamanote Line 1925.jpg
The Yamanote Line in 1925

The predecessor of the present-day Yamanote Line was opened on 1 March 1885 by the Nippon Railway Company, operating between Shinagawa Station in the south and Akabane Station in the north.<ref name="teishajo1998">Template:Cite book</ref> The top part of the loop between Template:STN and Template:STN (a distance of Template:Cvt) opened on 1 April 1903, and both lines were merged to become the Yamanote Line on 12 October 1909.<ref name="teishajo1998"/>

The line was electrified on December 16, 1909, soon after the Osaki – Shinagawa section was double-tracked on November 30.Template:Citation needed The loop was completed in 1925 with the opening of the double track, electrified section between Template:STN and Template:STN on 1 November, providing a north–south link via Tokyo Station through the city's business centre.<ref name="JRfutabasha2013">Template:Cite book</ref> A parallel freight line, also completed in 1925, ran along the inner side of the loop between Shinagawa and Tabata.

During the prewar era, the Ministry of Railways did not issue permits to private suburban railway companies for new lines to cross the Yamanote Line from their terminal stations to the central districts of Tokyo, forcing the companies to terminate services at stations on the line.Template:Citation needed This policy led to the development of Template:Nihongo around major transfer points on the Yamanote Line, most notably at Template:STN and Template:STN (which are now the two busiest passenger railway stations in the world).

The contemporary Yamanote Line came into being on 19 November 1956 when it was separated from the Keihin-Tōhoku Line and given its own set of tracks along the eastern side of the loop between Shinagawa and Template:STN.<ref name="JRfutabasha2013"/> However, Yamanote Line trains continued to periodically use the Keihin-Tōhoku tracks, particularly on holidays and during off-peak hours, until rapid service trains were introduced on the Keihin-Tōhoku Line in 1988.

A major explosion on the Yamanote Freight Line in Shinjuku in 1967 led to the diversion of freight traffic to the more distant Musashino Line. To address severe undercapacity, the freight line was repurposed for use by Saikyō Line and Shōnan-Shinjuku Line trains, as well as certain limited express trains such as the Narita Express and some liner services. Likewise, from 14 March 2015 onwards, the Ueno-Tokyo Line starts services, which connects the Tōhoku Main Line and Jōban Line to the Tōkaidō Main Line, to provide further relief on the busiest portion of the Yamanote Line today, the segment between Ueno and Tokyo stations.

Automatic train control (ATC) was introduced from 6 December 1981, and digital ATC (D-ATC) was introduced from 30 July 2006.<ref name="JRfutabasha2013"/>

Station numbering was introduced on JR East stations in the Tokyo area from 20 August 2016, with Yamanote Line stations numbered using the prefix "JY".<ref name="railfan20160821">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

A new station, Takanawa Gateway Station,<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> opened on 14 March 2020. This station was built on the Yamanote Line and Keihin-Tohoku Line between Shinagawa and Tamachi stations, becoming the first new station on the line since Nishi-Nippori was built in 1971.<ref name="jt20120105">Template:Cite news</ref><ref>Template:Cite news</ref> The distance between Shinagawa and Tamachi stations was Template:Cvt, making it the longest stretch of track between stations on the Yamanote Line.<ref name="jt20120105"/> The new station was constructed on top of the 20-hectare former railyard, which is undergoing rationalization and redevelopment by JR East; it is roughly parallel to the existing Sengakuji Station on the Toei Asakusa and Keikyu Main lines. The Yamanote Line and the Keihin-Tohoku Line tracks were moved slightly to the east to be aligned closer to the Tokaido Shinkansen tracks. The area on the west side of the yard made available will be redeveloped with high-rise office buildings, creating an international business center with good connections to the Shinkansen and Haneda Airport.<ref name="jt20120105"/>

In October 2022 JR East began performing trial runs for driverless trains on the line aimed to begin sometime in 2028. Two sets, 17 and 18, were fitted with the new system and re-entered service on the line as train crew conduct ongoing tests on their performance. Furthermore, the two sets are easy to distinguish with an “ATO” (Automatic Train Operation) sticker located on the front and sides of each set. Once ATO is fully installed, this will be the first line of JR East to feature driverless trains.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

See alsoEdit

Template:Portal

NotesEdit

Template:Refbegin a. <templatestyles src="Citation/styles.css"/>^{{#if:| }} Crowding levels defined by the Ministry of Land, Infrastructure, Transport and Tourism:<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

100% — Commuters have enough personal space and are able to take a seat or stand while holding onto the straps or hand rails.
150% — Commuters have enough personal space to read a newspaper.
180% — Commuters must fold newspapers to read.
200% — Commuters are pressed against each other in each compartment but can still read small magazines.
250% — Commuters are pressed against each other, unable to move.

b. <templatestyles src="Citation/styles.css"/>^{{#if:| }} Ridership of the section between Shinagawa-Tabata (via Shinjuku) including ridership from the Saikyō and Shōnan-Shinjuku services operating through this section. Ridership in the report estimated from OD surveys and commuter pass data. <templatestyles src="Citation/styles.css"/>^{{#if:| }} 「平均通過人員」or average passenger intensity is defined by JR East as Annual passenger-kilometre / route length / number of workdays per year.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Template:Refend

ReferencesEdit

Template:Reflist

Further readingEdit

External linksEdit

Template:Sister project

Template:Tokyo transit Template:East Japan Railway Company Lines Template:Authority control